Tender For Renovation Of Toilet And Kitchen In 2 Nos. Anganwadi-Cum-Creches Near Govt. Model High School, Karsan, Ramdarbar, U.T., Chandigarh., Chandigarh-Chandigarh

TDR : 55703188

Tender Notice
BOQ

4 Days Left

Chandigarh , Chandigarh

Tender Brief : Tender For Renovation Of Toilet And Kitchen In 2 Nos. Anganwadi-Cum-Creches Near Govt. Model High School, Karsan, Ramdarbar, U.T., Chandigarh.

Document Fees
Refer document

EMD
₹ 29450.0 /-

Tender Value
₹ 14.71 Lakhs /-

Submission Date
01-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
2	All kinds of soil
3	Pipes, cables etc, not exceeding 80 mm dia.
4	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
6	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
7	1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
8	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
9	Centering and shuttering including strutting, propping etc. and removal of form for :
10	Suspended floors, roofs, landings, balconies and access platform
11	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level
12	Thermo-Mechanically Treated bars of grade Fe-500D or more
13	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
14	Cement mortar 1:4 (1 cement : 4 coarse sand)
15	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
16	Cement mortar 1:4 (1 cement :4 coarse sand)
17	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
18	Granite stone slab colour black, Cherry/Ruby red
19	Area of slab over 0.50 sqm
20	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm)
21	Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
22	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
23	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
24	Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
25	On both side
26	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
27	250x16 mm
28	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
29	150x10 mm
30	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
31	125 mm
32	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
33	Profile B
34	Fixing with adjustable lugs with split end tail to each jamb
35	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
36	Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
37	12 mm cement plaster of mix :
38	1:4 (1 cement: 4 coarse sand)
39	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
40	New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
41	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
42	Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
43	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
44	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
45	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
46	Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
47	Renewal of old putty of glass panes (length)
48	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
49	Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
50	Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
51	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
52	Of area 3 sq. metres and below
53	Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
54	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
55	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
56	W.C. pan with ISI marked white solid plastic seat and lid
57	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
58	White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
59	Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
60	Kitchen sink without drain board
61	610x460 mm bowl depth 200 mm
62	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
63	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
64	Flexible pipe
65	32 mm dia
66	Providing and fixing soil, waste and vent pipes :
67	100 mm dia.
68	Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
69	75 mm diameter :
70	Centrifugally cast (spun) iron socketed pipe as per IS: 3989
71	Providing and fixing heel rest sanitary bend
72	100 mm dia
73	Sand cast iron S&S as per IS - 3989
74	Providing and fixing collar:
75	100 mm
76	Sand cast iron S&S as per IS - 3989
77	75 mm
78	Sand cast iron S&S as per IS - 3989
79	Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
80	100 mm
81	75 mm
82	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
83	100 mm inlet and 75 mm outlet
84	Sand cast iron S&S as per IS - 3989
85	Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
86	100 mm diameter pipe
87	75 mm diameter pipe
88	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
89	Internal work - Exposed on wall
90	20 mm dia nominal bore
91	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
92	15 mm dia nominal bore
93	20 mm dia nominal bore
94	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
95	External work
96	20 mm dia nominal bore
97	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
98	25 to 40 mm nominal bore
99	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
100	20 mm nominal bore
101	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
102	20 mm nominal bore
103	Providing and fixing uplasticised PVC connection pipe with brass unions :
104	45 cm length
105	15 mm nominal bore
106	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
107	100 mm diameter
108	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
109	20 mm diameter pipe
110	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
111	15 mm nominal bore
112	20 mm nominal bore
113	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
114	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
115	15 mm nominal bore
116	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
117	15 mm nominal bore
118	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
119	15 mm nominal bore
120	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
121	15mm nominal bore
122	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
123	Cutting holes up to 30x30 cm in walls including making good the same:
124	With common burnt clay F.P.S. (non modular) bricks
125	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
126	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
127	150 mm diameter
128	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
129	150 mm diameter S.W. pipe
130	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
131	H D - 20
132	Circular shape 560 mm internal diameter
133	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
134	For pipes 100 to 250 mm diameter
135	Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC.
136	Providing and fixing C.P. Brass Towel Ring of approved make complete in all respect. (As decided by the EIC)
137	Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make complete in all respect at site. (As decided by the EIC)
138	Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. (As desired by EIC)
139	Providing and fixing of C.P. brass Toilet Paper Holder complete in all respects of approved make complete cost with all taxes & labour charges etc. (As desired by EIC)
140	Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC)
141	Providing and Fixing of SFRC Gully Trap Cover & Frame of size 375x375x25mm thick complete in all respect. (Payment of concrete will be made extra)
142	Providing and Fixing of SFRC I.C. Cover & Frame 600x600x35mm thick complete in all respect. (Payment of concrete will be made extra)
143	Dismantling of C.I Pipes upto 150 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement.
144	Dismantling of G.I. Pipes upto 50 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement.
145	Constructing brick masonry chamber for underground SFRC inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) SFRC cover with frame, R.C.C. top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: (Based on item No.19.30.3.1)
146	Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
147	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
148	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white Vitreous China cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Based on DSR Item No.17.1.1 + 17.19.1)
149	White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests
150	Providing and Fixing of G.I. Tank Nipple complete in all respect.
151	20 mm
152	Dismantling of Wall tiles and scraping the plaster including removing of malba complete in all respect and to the entire satisfaction of EIC.
153	Providing and fixing of C.P. Brass Shower Arm casted 190 mm long of approved make round/square Shape for wall mounted showers with Wall Flange complete in all respects. (As decided by the EIC)
154	Supplying and Fixing of High speed Water Purifier with 3 stage purification system consisting of sediment filter, activated carbon filter and Ultravoilet treatment having purification capacity of 200 LPH, Water Control Sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete in all respect. Make: Aquaguard, Kent, Usha, Brita, Pure-it, A-Pure etc. to the entire satisfaction of EIC.
155	Providing and Fixing of 35 Ltr Capacity Hot Water Geyser including fixing at site of approved make complete in all respect. (As decided by the EIC)
156	Providing and filling DRY brick blast (32Mm to 50MM size) in depressed portion complete in all respect .
157	Providing and fixing square-mouth C.I. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight SFRC cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (Based on DSR Item No.19.4.1.1)
158	100x100 mm size P type
159	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Chandigarh Tenders

Construction Tenders

Civil Construction Tenders

Toilet Bathroom Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Renovation Of Toilet And Kitchen In 2 Nos. Anganwadi-Cum-Creches Near Govt. Model High School, Karsan, Ramdarbar, U.T., Chandigarh., Chandigarh-Chandigarh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Excavating trenches by mechanical/ manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
2	All kinds of soil
3	Pipes, cables etc, not exceeding 80 mm dia.
4	Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
6	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
7	1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
8	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
9	Centering and shuttering including strutting, propping etc. and removal of form for :
10	Suspended floors, roofs, landings, balconies and access platform
11	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level
12	Thermo-Mechanically Treated bars of grade Fe-500D or more
13	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
14	Cement mortar 1:4 (1 cement : 4 coarse sand)
15	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
16	Cement mortar 1:4 (1 cement :4 coarse sand)
17	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
18	Granite stone slab colour black, Cherry/Ruby red
19	Area of slab over 0.50 sqm
20	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm)
21	Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
22	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
23	30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
24	Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
25	On both side
26	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
27	250x16 mm
28	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
29	150x10 mm
30	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
31	125 mm
32	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
33	Profile B
34	Fixing with adjustable lugs with split end tail to each jamb
35	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
36	Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
37	12 mm cement plaster of mix :
38	1:4 (1 cement: 4 coarse sand)
39	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
40	New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
41	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
42	Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
43	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
44	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
45	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
46	Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
47	Renewal of old putty of glass panes (length)
48	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
49	Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
50	Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
51	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
52	Of area 3 sq. metres and below
53	Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
54	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
55	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
56	W.C. pan with ISI marked white solid plastic seat and lid
57	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
58	White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
59	Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
60	Kitchen sink without drain board
61	610x460 mm bowl depth 200 mm
62	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
63	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
64	Flexible pipe
65	32 mm dia
66	Providing and fixing soil, waste and vent pipes :
67	100 mm dia.
68	Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
69	75 mm diameter :
70	Centrifugally cast (spun) iron socketed pipe as per IS: 3989
71	Providing and fixing heel rest sanitary bend
72	100 mm dia
73	Sand cast iron S&S as per IS - 3989
74	Providing and fixing collar:
75	100 mm
76	Sand cast iron S&S as per IS - 3989
77	75 mm
78	Sand cast iron S&S as per IS - 3989
79	Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
80	100 mm
81	75 mm
82	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
83	100 mm inlet and 75 mm outlet
84	Sand cast iron S&S as per IS - 3989
85	Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
86	100 mm diameter pipe
87	75 mm diameter pipe
88	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
89	Internal work - Exposed on wall
90	20 mm dia nominal bore
91	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
92	15 mm dia nominal bore
93	20 mm dia nominal bore
94	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
95	External work
96	20 mm dia nominal bore
97	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
98	25 to 40 mm nominal bore
99	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
100	20 mm nominal bore
101	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
102	20 mm nominal bore
103	Providing and fixing uplasticised PVC connection pipe with brass unions :
104	45 cm length
105	15 mm nominal bore
106	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
107	100 mm diameter
108	Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
109	20 mm diameter pipe
110	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)
111	15 mm nominal bore
112	20 mm nominal bore
113	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
114	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
115	15 mm nominal bore
116	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
117	15 mm nominal bore
118	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
119	15 mm nominal bore
120	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
121	15mm nominal bore
122	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
123	Cutting holes up to 30x30 cm in walls including making good the same:
124	With common burnt clay F.P.S. (non modular) bricks
125	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
126	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
127	150 mm diameter
128	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
129	150 mm diameter S.W. pipe
130	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
131	H D - 20
132	Circular shape 560 mm internal diameter
133	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
134	For pipes 100 to 250 mm diameter
135	Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC.
136	Providing and fixing C.P. Brass Towel Ring of approved make complete in all respect. (As decided by the EIC)
137	Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make complete in all respect at site. (As decided by the EIC)
138	Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. (As desired by EIC)
139	Providing and fixing of C.P. brass Toilet Paper Holder complete in all respects of approved make complete cost with all taxes & labour charges etc. (As desired by EIC)
140	Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC)
141	Providing and Fixing of SFRC Gully Trap Cover & Frame of size 375x375x25mm thick complete in all respect. (Payment of concrete will be made extra)
142	Providing and Fixing of SFRC I.C. Cover & Frame 600x600x35mm thick complete in all respect. (Payment of concrete will be made extra)
143	Dismantling of C.I Pipes upto 150 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement.
144	Dismantling of G.I. Pipes upto 50 mm dia and taking out the pipes, manually or mechanical means including stacking of pipes with in 50 metres lead and reconditioning the surface as per direction of Engineer-in-charge as per requirement.
145	Constructing brick masonry chamber for underground SFRC inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) SFRC cover with frame, R.C.C. top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: (Based on item No.19.30.3.1)
146	Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
147	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
148	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white Vitreous China cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Based on DSR Item No.17.1.1 + 17.19.1)
149	White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests
150	Providing and Fixing of G.I. Tank Nipple complete in all respect.
151	20 mm
152	Dismantling of Wall tiles and scraping the plaster including removing of malba complete in all respect and to the entire satisfaction of EIC.
153	Providing and fixing of C.P. Brass Shower Arm casted 190 mm long of approved make round/square Shape for wall mounted showers with Wall Flange complete in all respects. (As decided by the EIC)
154	Supplying and Fixing of High speed Water Purifier with 3 stage purification system consisting of sediment filter, activated carbon filter and Ultravoilet treatment having purification capacity of 200 LPH, Water Control Sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete in all respect. Make: Aquaguard, Kent, Usha, Brita, Pure-it, A-Pure etc. to the entire satisfaction of EIC.
155	Providing and Fixing of 35 Ltr Capacity Hot Water Geyser including fixing at site of approved make complete in all respect. (As decided by the EIC)
156	Providing and filling DRY brick blast (32Mm to 50MM size) in depressed portion complete in all respect .
157	Providing and fixing square-mouth C.I. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight SFRC cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (Based on DSR Item No.19.4.1.1)
158	100x100 mm size P type
159	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Please Enable Macros to View BoQ information

Tender For Renovation Of Toilet And Kitchen In 2 Nos. Anganwadi-Cum-Creches Near Govt. Model High School, Karsan, Ramdarbar, U.T., Chandigarh., Chandigarh-Chandigarh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us