|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1 :4 (1 cement : 4 coarse sand) (DSR 6.4.1) |
| 3 | 12 mm cement plaster of mix : |
| 4 | 1:4 (1 cement: 4 fine sand) (DSR 13.1.1) |
| 5 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.complete (Copper oxidised as per IS 1378) |
| 6 | 300x16 mm (DSR 9.62.1) |
| 7 | 250x16 mm (DSR 9.62.2) |
| 8 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 9 | 125 mm (DSR 9.66.1) |
| 10 | 100 mm (DSR 9.66.2) |
| 11 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :(Copper oxidised as per IS 1378) |
| 12 | 115 mm (DSR 9.67.2) |
| 13 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (DSR 9.83) |
| 14 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 15 | Twin rubber stopper (DSR 9.101.2) |
| 16 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 15.56) |
| 17 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 18 | In cement mortar (DSR 15.7.4) |
| 19 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster,preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (DSR 14.13) |
| 20 | Providing and supplying of new common burnt clay F.P.S. (non modular) brick tiles of class designation 10, conforming to IS 2690, inplace of the broken tiles during the course of dismantling brick tile covering for regrading of mud phaska. (NS) |
| 21 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
| 22 | 25 mm thick (DSR 11.26.1) |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 24 | Old work (one or more coats) (DSR 13.81.1) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 26 | One or more coats on old work (DSR 13.99.1) |
| 27 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91) |
| 28 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 29 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR 13.111.1) |
| 30 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 31 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.1) |
| 32 | Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutter with vertical style & rails 75mm thick and 22 x 12 gauge wire mesh fixed with 1/2” x 3/4” beading and including 2 Nos. of 3” iron hinges , 2 nos tower bolts 4'' And 1 no Aluminium handle 4'' and complete fixed in position including two coats of paint and one coat of primer after preparation of surface (special quality) Complete in all respect to the entire satisfaction of Engineer-in-Charge. (NS) |
| 33 | Providing and fixing 35mm thick golden champ wood (kiln seasoned) wire gauge window shutter with vertical style & rails 75mm thick and 22 x 12 gauge wire mesh fixed with 1/2” x 3/4” beading and including 2 Nos. of 3” iron hinges , 2 nos tower bolts 4'' And 1 no Aluminium handle 4'' and complete fixed in position including two coats of paint and one coat of primer after preparation of surface (special quality) Complete in all respect to the entire satisfaction of Engineer-in-Charge. (NS) |
| 34 | Providing and Fixing 35mm thick golden champ wood (kiln seasoned) wire gauge door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail wire mesh 22 x 12 mm gauge fixed with 1/2” x 3/4” golden champ wood (kiln seasoned) beading, with two vertical members in each panel to hold wire mesh, with necessary 4 Nos. of hinges, Aluminium Tower bolts, Aluminium Handles 5” and Aluminium. door stopper and door closer and complete fixed in position including two coats of paint and one coat of primer after preparation of surface (special quality) Complete in all respect to the entire satisfaction of Engineer-in-Charge. (NS) |
| 35 | Providing and fixing Golden Champ wood Chowkhats (Kiln seasoned ) including cost of corner straps, iron hold fasts, screws, nails fevicol etc. The rate includes the cost of dismanteling of the damages chowkhats and making good the damage to the walls plaster and floors as required including disposal of rubbish to the dumping ground. The rate further includes the cost of special quality paint over one coat of primer etc complete in all respect and to the entire satisfaction of Engineer-in-charge. (NS) |
| 36 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. up to the height of 15m with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness. (NS) |
| 37 | Dashing Cement Concrete 1:11/2 :3 in R.C.C. beams, Stairs, Facias etc. of average thickness 1\\" excluding steel reinforcement, centering and shuttering but including curing of the concrete complete in all respect and to entire statisfaction of the Engineer-in-charge. (NS) |
| 38 | Removing rust from exposed reinforcement bars upto 15m height in RCC walls, columns, beams, shelves etc to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles afer 24hrs of its application with wire brush and thouroughly washing witgh water and allowing it to dry all complete as per directions of engineer in charge. (NS) Please Enable Macros to View BoQ information |
