|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mte lead 15.56 |
| 2 | Dismantling tile work in floors and roofs laid in cement morter including stacking material within 50 meter lead .For thickness of tiles 10 mm to025 mm(D.S.R 15.23.1) |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm As per (D.S.R 11.41.2) |
| 4 | Marbal stone flooring with 18 mm thick marble stone as per sample of marble approved by engineer in charg over 20 mm (average ) thick base of cement mortar 1:4 lad and jointed with grey cement slurry including rubbing and polishing complete with (D.S.R.11.23.1) |
| 5 | Removing white or colour wash by scraping and sand paperinhg and preparing the surface smoothe including necessary repairs to scratches etc. complete (D.S.R.13.88) |
| 6 | Providing and applying white cement bassed putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to preaper the surface even and smooth complate D.S.R.13.80 |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colourNew work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less then 50 gram/litre (D.S.R.13.41.1): |
| 8 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (D.S.R.13.48.2) |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (D.S.R.9.21.1) |
| 10 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes D.S.R 10.30.1 |
| 11 | Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.a)Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.D.S.R 17.1.1 |
| 12 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required |
| 13 | W.C. pan with ISI marked white solid plastic seat and lid D.S.R 17.1.1 |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap D.S.R 17.7.4 |
| 15 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 16 | (a) 32 mm diaD.S.R 17.28.2.1 |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 18 | (a) 20 mm dia nominal bore D.S.R 18.10.2 |
| 19 | (b) 15 mm dia nominal bore D.S.R 18.11.1 |
| 20 | Providing and fixing brass stop cock of approved quality : |
| 21 | (b) 15 mm dia nominal bore |
| 22 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 23 | 15 mm dia nominal bore |
| 24 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.D.S.R 17.33 |
| 25 | Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. As per D.S.R. 17.71 |
| 26 | Liquid soap Container |
| 27 | providing and fixing white vitreous china flate back or wall corner type lipped front urinal besin of 430*260*350 mm and 340*410*265 mm size respectively with automatic flushing cistern with standerd flush pipe and C.P brass spreaders with brass unions and G. I clamps complete including painting of fitting and bracket cutting and making good the walls and floors wherever required As per D.S.R. 17.4 |
| 28 | One urinal basin with 5 liter white P.V.C automatic flushing cistern 17.4.1 |
| 29 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, 78 mm and effective height of 88 mm, weighing not lesswidth than 190 gms. As per D.S.R. 17.73.2 |
| 30 | Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper onductor single core cablein surface recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. DSR NO. 1.10 |
| 31 | Group C DSR NO. 1.10.3 |
| 32 | Wiring for light/ power plug with 2X4 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper |
| 33 | Power plug wiring in PVC conduit (4x4 sq.mm. DSR NO. 1.12 |
| 34 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required DSR NO 1.14 |
| 35 | 2 X 1.5 sq. mm + 1X 1.5 sq mm earth wire DSR NO. 1.14.1 |
| 36 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR NO. 1. 14.2 |
| 37 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. DSR NO. 1.24 |
| 38 | 5/6 A switch DSR NO. 1.24.1 |
| 39 | 15/16 A switch DSR NO. 1.24.3 |
| 40 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular piate switch box including connections but excluding modular plate etc, as required. DSR NO. 1.25 |
| 41 | Supply and Celling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with S:1709/1984 with latest amendment. The rated voltage 220/240 vait 50Hz 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system. DSR NO. 19.1 |
| 42 | Supply and fixing of sign board including supply and cost of all materils labours T & P etc. required templet as directed by the Engineer In charge. |
| 43 | GST 18 % Please Enable Macros to View BoQ information |
