|
| 1 | Supply and laying or fixing on walls or passing throug cable duct / pipe / on wall, UG cable XLPE insulated, screned, PVC bedded galvanised steel strip or wire armoured electric power cables with aluminium conductor, 1100 volts, grade having cross sectional area 3.5 core 300 sqmm including necessary clamps,thimble, gland, etc and taking down old unserviceable cable complete all as specified and directed |
| 2 | All as per item No 1 here-in-before but cable of size 240 Sqmm 3.5 core complete all as specified and directed |
| 3 | All as per item No 1 here-in-before but cable of size 185 Sqmm 3.5 core complete all as specified and directed |
| 4 | All as per item No 1 here-in-before but cable of size 150 Sqmm 3.5 core complete all as specified and directed |
| 5 | All as per item No 1 here-in-before but cable of size 120 Sqmm 3.5 core complete all as specified and directed |
| 6 | All as per item No 1 here-in-before but cable of size 95 Sqmm 3.5 core complete all as specified and directed |
| 7 | All as per item No 1 here-in-before but cable of size 70 Sqmm 3.5 core complete all as specified and directed |
| 8 | All as per item No 1 here-in-before but cable of size 50 Sqmm 3.5 core complete all as specified and directed |
| 9 | All as per item No 1 here-in-before but cable of size 35 Sqmm 3.5 core complete all as specified and directed |
| 10 | All as per item No 1 here-in-before but cable of size 25 Sqmm 3.5 core complete all as specified and directed |
| 11 | All as per item No 1 here-in-before but cable of size 16 Sqmm 4 core complete all as specified and directed |
| 12 | All as per item No 1 here-in-before but cable of size 10 Sqmm 4 core complete all as specified and directed |
| 13 | Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable complete all as specified and directed. |
| 14 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soft /loose soil complete all as specified and directed |
| 15 | Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed |
| 16 | Supply and laying in replacment of 100 mm bore High density polyethylene pipes(HDPE) PN 10 laid in trenches/wall for cable protection as per site requirement complete all as specified and directed |
| 17 | All as per item No 16 here-in-before butof size 65 mm bore complete all as specified and directed |
| 18 | All as per item No 16 here-in-before butof size 50 mm bore complete all as specified and directed |
| 19 | Material and labour in replacement for GI tubing of size 40mm dia medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc complete all as specified and directed |
| 20 | All as per item No 19 here-in-before but GI pipe of size 50mm dia complete all as specified and directed |
| 21 | All as per item No 19 here-in-before but GI pipe of size 80mm dia complete all as specified and directed |
| 22 | Supply and fix in replacement cable jointing kit for straight through heat shrinkable type joint with jointing material and all connected accessories suitable for XLPE armoured aluminium conductor cable 1100 volts grade of size 3.5 core 300 to 400 sqmm complete all as specified and directed |
| 23 | All as per item No 22 here-in-before but cable jointing kit of size 185 to 240 sqmm complete all as specified and directed |
| 24 | All as per item No 22 here-in-before but cable jointing kit of size 70 to 150 sqmm complete all as specified and directed |
| 25 | All as per item No 22 here-in-before but cable jointing kit of size 25 to 50 sqmm complete all as specified and directed |
| 26 | All as per item No 22 here-in-before but cable jointing kit of size 10 to 16 sqmm complete all as specified and directed |
| 27 | Material and labour for servicing of High mast light motor assembly 3 phase 415 Volts or including greasing ,oiling of pulleys, moving parts, chain steel rope etc complete all as specified and directed |
| 28 | Material and labour for rewinding of high mast tower motor assembly of 415 volts 3 phase with super enamelled copper wire,replacement of bearings/worn out nuts,bolts etc as per existing type and size and re-fixing the motor assembly on the same position and testing on complete all as specified and directed |
| 29 | Supply and fix, in repair GI brackets for street light fitting made out of 40 mm dia,1.5 m long, medium grade pipe, bend to 120 degree angle shape, drilled holes etc &fixed with clamps, nuts, bolts etc, complete all as specified and directed . |
| 30 | Supply and fix in replacement, LED street light fitting 70 watts energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and not less than 130 lumen per watt and impact resistance of IK10 with 10KV Built-in Surge Protection Device,complete all as specified and directed . |
| 31 | All as per item No 30 here-in-before but of capacity 90 watt,complete all as specified and directed . |
| 32 | All as per item No 30 here-in-before but of capacity 120 watt,complete all as specified and directed . |
| 33 | All as per item No 30 here-in-before but of capacity 150 watt complete all as specified and directed . |
| 34 | Supply and fix in replacement LED Flood light fitting 200 Watt, pressure die cast aluminum housing, heat resistant, toughened glass with frame with IP 66 Protection,complete all as specified and directed |
| 35 | Supply and fix in replacement LED Flood light fitting 100 Watt, pressure die cast aluminum housing, heat resistant, toughened glass with frame with IP 66 Protection,complete all as specified and directed |
| 36 | Supply and fix in replacement LED Flood light fitting 50 Watt of colour White/Red/ Blue/ Green colour, pressure die cast aluminum housing, heat resistant, toughened glass with frame with IP 66 Protection,complete all as specified and directed . |
| 37 | Supply and fix in replacement garden Light fitting, 25 Watt LED Decorative Post top for 360° indirect light with IP 65 protection resistant to impact and corrosion,glare-free new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power leds as light source ,including taking down the old one complete all as specified and directed . |
| 38 | Supply and fix in replacement LED bollard type fitting 10 Watt cpacity 650 mm height, LED bollard AFlare fitted with low glare diffuser with IP 65 protection, complete with necessary pcc foundation including taking down existing old pattern unserviceable light fitting complete all as specified and directed |
| 39 | Material and labour , Painting to steel tubular pole of any height , any size with two coats of aluminium paint over one coat anti corrosive paint, including preparation of surface , by removing old paint, proper cleaning , filling cavities with filler, marking pole Number as existing, complete all as specified and directed |
| 40 | Material and labour ,Cement based painting to Concrete pole of any height ,any size, including preparation of old surface, marking pole Number as existing, with synthetic enamel paint ,size of 50 mm height, in black colour with yellow back ground in round shape of dia max up to 150 mm complete all as specified and directed |
| 41 | Supply and fixing, in repair SMC junction box with IP 65 protection including MCB SP, 6 Amps 1 No, with 2 nos of aluminium bus bar and suitable size clamps fixing for pole/in pcc foundation etc,including taking down the old one, complete all as specified and directed |
| 42 | Supply and fix, in repair Digital time Switches ,DIN type programmable every 1 Min, with backup of 6 years ,28 Memory locations,current Capacity 16A, weekly program,with 1 change over (1co) total 28 programs , including taking down the old one complete all as specified and directed . |
| 43 | Supply and fix, in repair power contactor,three pole,85 Amp, MNX type ,complete all as specified and directed |
| 44 | Supply and fix, in repair power contactor, three pole , 65 Amp, MNX type, of size 40mm dia complete all as specified and directed |
| 45 | Supply and fix, in repair MCB SP, 6 to 32 Amp ,\\"C\\" curve, 240 volt AC, as per IS/IEC 60898, complete all as specified and directed |
| 46 | Supply and fix LED Street light/ Flood light driver 50 W to 70 W for any type and make complete all as specified and directed |
| 47 | Supply and fix in replacement LED Street light/ Flood light driver 70 Watt to 90 W,for any type and make complete all as specified and directed |
| 48 | Supply and fix in replacement LED Street light/Flood light driver 100 Watt to 200 W,for any type and make complete all as specified and directed |
| 49 | Supply and fix in replacement LED driver 12W to 40W suitable for LED Bollard/Garden light/Post top light of any type approved make complete all as specified and directed |
| 50 | Material and labour in replacement for 3 core copper cable of size 1.5sqmm from junction box of the pole to light fitting and connecting to the electrical system complete all as specified and directed |
| 51 | Dismantling/removing of existing octagonal pole any length and type by dismantling the foundation from existing position and refixing the pole to new location including PCC foundation with proper alignment complete all as specified and directed |
| 52 | Material and labour , for dismantling of old Steel tubular poles duly removing all connection , dismantling PCC platform and taken out from the site complete all as specified and directed |
| 53 | Material and labour , for dismantling of old concrete poles duly removing all connection , dismantling PCC platform and taken out from the site complete all as specified and directed |
| 54 | Cutting existing road/hardstand/concrete blocks/slabs/brick work or stone masonry of any type by using crow bar chisel up to a depth of 45 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers cold mix bitumen over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 30 cm thick complete all as specified and directed |
| 55 | Supply and fix , in replacement MCCB 4 Pole, 400 Amps, 36 KA, 415 V ,with adjustable Thermal magnetic release and double breaking mechanism Ics=100% Icucomplete all as specified and directed |
| 56 | All as per item No 55 here-in-before but MCCB 4 Pole, 320/315 Amps, 36 KA, 415 V complete all as specified and directed |
| 57 | All as per item No 55 here-in-before but MCCB 4 Pole, 250 Amps, 36 KA, 415 V complete all as specified and directed |
| 58 | All as per item No 55 here-in-before but MCCB 4 Pole, 200 Amps, 36 KA, 415 V complete all as specified and directed |
| 59 | All as per item No 55 here-in-before but MCCB 4 Pole, 160 Amps, 36 KA, 415 V & Ics=75% complete all as specified and directed |
| 60 | All as per item No 55 here-in-before but MCCB 4 Pole, 125 Amps, 25 KA, 415 V complete all as specified and directed |
| 61 | All as per item No 55 here-in-before but MCCB 4 Pole, 100 Amps, 25 KA, 415 V complete all as specified and directed |
| 62 | All as per item No 55 here-in-before but MCCB 4 Pole, 63 Amps, 25 KA, 415 V complete all as specified and directed Please Enable Macros to View BoQ information |
| 63 | All as per item No 55 here-in-before but MCCB 4 Pole, 63 Amps, 25 KA, 415 V complete all as specified and directed Please Enable Macros to View BoQ information |
