|
| 1 | Disconnecting existing PVC water storage tanks of capacity exc 500 ltrs & n exc 1000 ltrs, setting aside (or lowering if required) for laying of APP memberane or repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 2 | Demolition of cement concrete(reinforced) in any description in any position not otherwise specially provided disposal off from the premises at distance of not exc . 1 Km complete all as specified and directed. |
| 3 | Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution/clorin/KMnO4 and removing vegetation around the over head tank/plat form including , opening and reconnecting with existing tube as site requirement writing the date of cleaning with paint/stencil etc complete all as directed by Engineer-in-Charge |
| 4 | Removing of plants including roots by demolishing of brick work/PCC/RCC in parapet sides,wall ,fascia,chajjah,roof including necessary scaffolding, any type, any location/height (i.e roof parapet walls near pipes etc) and applying acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 200 mm) complete all as specified and directed. |
| 5 | M&L for repairing of R.C.C projections, chajjias, roofs, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation, Scarpping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and finished with cement and sand motar (1:3) using coarse sand and work in patches including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed: No other extra payment shall made for scaffolding and necessery arrangements for executing the item. |
| 6 | Dismantling structural steel work including doors, gates, grills but excluding framed truss etc complete all as specified and directed. |
| 7 | S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed. |
| 8 | M & L for preparation of new or previously untreated surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 9 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 10 | S & F Pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall or fixed in wall crumple joints of bldg fixed with self tapping screws with arrangement a whole for thermal expantion and contraction complete all as specified and directed. |
| 11 | S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 12 | S&F Anodised aluminium window and ventilator shutters, Sliding/side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m includingnecessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 13 | S&F Anodised aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat forfixing etc. complete all as specified |
| 14 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed. |
| 15 | S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or rubber beading in squares of any size complete all as specified and directed by Engr-in-charge. |
| 16 | M&L Prelaminated particleboard,18/19 mm thick, interior grade,prelaminated oneside with decorativechoice lamination & other side balancing white lamination incl edge beeding,fixed with screws totimber frame work |
| 17 | S&F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position incl tank nipple, connections as required at inlet and outlet in execution for GI/CPVC pipe line including of dismatling of existing water tank all as specified and directed |
| 18 | S & Fin repair PTMT 25mm dia bore ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule incl nipple,connection pipe,union etc.. and fixed. |
| 19 | S & F in repair 25mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. |
| 20 | S & F in repair 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. |
| 21 | Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed |
| 22 | Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed |
| 23 | S & F in repair of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 24 | S & F in repair of 25mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 25 | S & F as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 26 | S&F in repair 15 mm dia bore swan neck pillar taps ,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 27 | S & F in repair 600x450mm bevelled edges 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 28 | S & F in repair 600mm long ms chromium plated tubular towel rail 20mm dia, D type fixed with rawl plugs in cement mortar 1:3 with MS screws complete all as specified and directed. |
| 29 | S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 30 | S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union. |
| 31 | S & F as in repair abs body chromium plated shower rose 125 mm size with or without swivel joints, anysize, including fixing to steel pipe or union all as specified and directed. |
| 32 | S & F in repair 15mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed all as specified and as directed. |
| 33 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. |
| 34 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 900 mm all as specified and as directed. |
| 35 | S & F in repair 100mm dia steel chromium plated gratings fixed on floor trap/Nahani trap in cement mortar 1:4 complete all as specified and directed. |
| 36 | S&F in repairs15mm bore cast copper alloy chromium plated fancy type wall mixer tap for cold & hot with overhead shower arrangement complete all as specified and directed |
| 37 | S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed |
| 38 | S&F CP peg set of 5 hooks incl fixing to walls, wooden shutters etc complete |
| 39 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.. |
| 40 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 41 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 42 | S&F in repair PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 43 | S&Fin repair PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 44 | S & F in repair of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete all as specified and directed. |
| 45 | S & F in repair of PVC (SWR) junction single, (Single T) 75 mm bore equal or unequal with acess door complete all as specified and directed. |
| 46 | S & F in repair 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified and as directed. |
| 47 | M & L for 10 mm thick rendering in CM 1:6 on roof surface and finished surfaces fair and even without using extra cement including removing of existing treatment , app membrane with any thickness complete specified and directed . |
| 48 | M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified |
| 49 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified and directed. |
| 50 | M&L for fixing APP based polymeric membrane minimum weighing 3.6kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 51 | M & L for applying two coat of Aluminium paint over surfaces of any description including preparation of surfaces etccomplete all as specified and directed. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 53 | M & L cement concrete coloured tiles 250x250x25 mm thick laid over and including 20 mm thick bedding layer in cement mortar 1:6 set, jointed and pointed in cement mortar 1:3 with grey cement and using pigment as in paths complete all as specified. |
| 54 | S&F PVC in repairs waste pipe size 32/40 mm X 800 mm flexible with coupling for WHB/Urinal etc. complete all as specified and directed. |
| 55 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 56 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 57 | M&L Brick work except Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 58 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. |
| 59 | M & L for rendering 10mm thick internal surfaces on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed. |
| 60 | M & L for applying a thin layer of 0.50mm thick white wall care putty over newly plastered surface in walls/ceilings to prepare the surface even and smooth complete all as specified and directed. |
| 61 | M & L for preparation of new plastered/decorated wall surfaces and applying two coats of distempering with oil bound distemper as per manufacturer instruction white or tinted complete all as specified and directed. |
| 62 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 3% by wt of cement. Note:-WPC measured and paid separatly |
| 63 | Supply Only integral water proofing compound |
| 64 | M & L for preparation of new plastered/decoarated wall surfaces and applying two coats of cement base paint complete all as specified and directed. |
| 65 | M & L for Preparation of old decorated surfaces of walls and applying one coat of distempering with oil bound distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 66 | S&F 4mm thick superior quality shelves (corner), made of transparent toughened glass, size 30x30cm complete all as specified and as directed. |
| 67 | S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed. |
| 68 | S&F as in repair PVC connections 15mm size with PTMT nuts of length 300 mm all as specified and as directed. |
| 69 | S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. |
| 70 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 71 | S & F in repairs vitreous China wash basin, white, flat back, size 550 x 400 mm including a pair of bracket, 32mm dia CP waste and 15mm bore CP pillar tap screwed to iron pipe complete all as specified and directed. |
| 72 | S&F in repair, viterous china squatting pan (Orissa pattern) long pan size 580x440mm, white with intergral footrest including 'P' or 'S' trap including provision of lime concrete bedding complete all as specified. |
| 73 | S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 74 | S & F in repair PTMT 25mm dia bore ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass/CPVC ferrule incl nipple connection/fittings to fixed the float valvecomplete all as specified and directed. |
| 75 | S & F in repair 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed to CPVC /GI pipe incl all fittings and accessories as required. |
| 76 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 77 | S&F in repair wall mounted mirror cabinet with an integrated shelf size is 540 x 340 x 130 mm complete all as specified and directed |
| 78 | S&F in repair chromium plated sink mixer complete all as specified and directed |
| 79 | S & F as in repair 15mm Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 80 | S & F in repair ms chromium plated soap dish fixed to wall with CP screw complete all as specified and directed. |
| 81 | Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution/clorin/KMnO4 and removing vegetation around the over head tank/plat form including , opening and reconnecting with existing tube as site requirement writing the date of cleaning with paint/stencil etc complete all as directed |
| 82 | Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified and directed. |
| 83 | Removing of plants including roots by dismantling of brick work/PCC/RCC including necessary scaffolding, any type, any location/height (i.e roof parapet walls near pipes etc) and applying acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 200 mm) complete all as specified and directed. |
| 84 | Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage all as specified and directed by Engr-in-Charge. |
| 85 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 86 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 87 | M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed |
| 88 | M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:6 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting, polishing and rounding of edges etc. complete all as specified and directed. |
| 89 | M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 90 | M & L for coloured glazed ceramic tiles in vertical surface 7mm thick exc 0.06 Sqm but not exc. 0.20 Sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4 as backing for tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring/wall tiles) |
| 91 | M & L for applying two coat of water proofing shield liquid rubber paint all around the water tank /in roof / parapet / chajja etc. all other as directed in other places roof or wall. complete all as specified and directed. Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
