|
| 1 | PEG TABLE : FD-25(M), FD-236, FD-277, FD-384 Dismantle, take out carefully & replace old components of peg table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty-800 |
| 2 | Replacement of old existing broken top of peg table of any description with S&F new top of peg table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 3 | Replacement of leg with S&F new teak wood leg made to shape. |
| 4 | Replacement of long rail with S&F new teak wood long rails made to shape. |
| 5 | Replacement of short rails with S&F new teak wood short rails made to shape. |
| 6 | S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed. |
| 7 | Polishing one coat to old and two coats to new surfaces to peg table with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 8 | TABLE CENTER : FD-29(M), FD-235, FD-274 Dismantle, take out carefully & replace old components of table center. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty-330 |
| 9 | Replacement of old existing broken top of table center of any description with S&F new top of Table Center with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4 mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 10 | Replacement of leg with S&F new teak wood leg made to shape. |
| 11 | Replacement of long rail with S&F new teak wood long rails made to shape. |
| 12 | Replacement of short rails with S&F new teak wood short rails made to shape. |
| 13 | Replacement of stiffener with S&F new teak wood stiffener made to shape. |
| 14 | S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing. |
| 15 | Polishing one coat to old and two coats to new surfaces to table center with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 16 | TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379 Dismantle, take out carefully & replace old components of table dressing gents Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-150 |
| 17 | Replacement of old existing broken top of table dressing gents of any description with S&F new top of table dressing gents with 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 18 | Replacement of side with S&F new side with 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 19 | Replacement of bottom with S&F new bottom with 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 20 | Replacement of drawer with S&F new drawer made to shape fixed in position. |
| 21 | Replacement of back frame with S&F new back frame with 6mm thick commercial ply grade I BWR grade made to shape fixed in position. |
| 22 | Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality. |
| 23 | Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge/GE |
| 24 | Polishing one coat to old and two coats to new surfaces to table dressing gents with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 25 | TABLE DRESSING LADIES WITH MIRROR : FD-32, FD-251 Dismantle, take out carefully & replace old components of table dressing ladies. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty-140 |
| 26 | Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality. |
| 27 | Replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood). |
| 28 | M & L for replacement of U/S 6mm thick back ply wood of mirror. |
| 29 | M & L for replacement of U/S stiffener between legs. |
| 30 | Replacement of broken top of table dressing ladies of any description with S&F new top of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 31 | Replacement of side of table dressing ladies with S&F new side of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. |
| 32 | Replacement of bottom of table dressing ladies with S&F new bottom of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. |
| 33 | Replacement of drawer of table dressing ladies with S&F new drawer as per Drg |
| 34 | Replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood). |
| 35 | Replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood). |
| 36 | Replacement of back of table dressing ladies with S&F new back of table dressing ladies with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. |
| 37 | Removing old broken/ U/S sliding glass from table dressing ladies and S & F new 5.5mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed. |
| 38 | Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror of size 1220 x 366 x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge |
| 39 | Polishing one coat to old and two coats to new surfaces to table dressing ladies with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 40 | TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-124 |
| 41 | Replacement of old existing broken top of table dining 6 persons of any description with S&F new top of table dining 6 persons with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 42 | All as per Srl item No. 5.01 here-in-before but top of table dining 4 persons. |
| 43 | L-Shape wooden corner of size 4\\" x 4\\" x 1\\" to the Table between legs and rail to be fixed with screw. |
| 44 | Replacement of leg with S&F new teak wood leg made to shape |
| 45 | Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape |
| 46 | Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape |
| 47 | Replacement of short rails with new teak wood short rails made to shape |
| 48 | S & F new Nylon Buffer of superior quality with suitable screws for fixing. |
| 49 | Polishing one coat to old and two coats to new surfaces to table dining 6 persons with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 50 | All as per Srl item No. 5.09 here-in-before but table dining 4 persons. |
| 51 | BED PLY TOP: FD-213/246 Dismantle, take out carefully & replace old components of bed. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-180 |
| 52 | Removing of old U/S ply from bed ply top and S & F new ply wood, 12mm thick, commercial on both side, BWR grade of size (as shown on drg) fixed with steel screws made to shape fixed in position complete all as shown on drg, specified and directed. |
| 53 | Replacement of long rail with S&F new Ist class HW (teak wood) long rail made to shape fixed in position complete all as shown on drg specified and directed. |
| 54 | Replacement of short rail with S&F new Ist class HW (teak wood) short rail made to shape fixed in position complete all as shown on drg specified and directed. |
| 55 | Replacement of stiffener with S&F new Ist class HW (teak wood) stiffener made to shape fixed in position complete all as shown on drg specified and directed. |
| 56 | Replacement of ply wood on both side of head rest frame with S&F new 3.5mm thick ply wood one side teak veneered & other side commercial grade - I (with BWR Resin) and including teak wood beading plain for head rest alround and Half cut round beading front side and other side complete as per drg, beading made to shape fixed in position complete all as shown on drg specified and directed. |
| 57 | All as per srl item No. 9.05 here-in-before but foot rest. |
| 58 | Replacement of leg of head rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed. |
| 59 | Replacement of leg of foot rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed. |
| 60 | Polishing one coat to old and two coats to new surfaces to bed with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 61 | CHAIR EASY OF SORTS : FD-17, FD-201, FD-229, FD-281, FD-1108 : Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-467 |
| 62 | Dismantling, taking out carefully old existing broken back leg of the chair easy of any description & replacement of the same with S&F new back leg of Ist class HW (TW) made to shape, fixed in position. |
| 63 | Replacement of front leg with S&F new front leg made out of Ist class HW (TW). |
| 64 | Replacement of side rail with S&F new side rail for seat made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. |
| 65 | Replacement of front & back rail for seat with S&F new front & back rail made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. |
| 66 | Replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. |
| 67 | Replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side. |
| 68 | Replacement of front support rail with S&F new support rail made out of Ist class HW (TW). |
| 69 | Replacement of Arm rest with S&F new Arm rest made out of Ist class HW (TW). |
| 70 | Provn of new angular bracket with 04 Nos steel screws of suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm. |
| 71 | Recanning of Chair Easy of sorts with 2mm wide new plastic cane in Godrej pattern. |
| 72 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 73 | Polishing one coat to old and two coats to new surfaces to Chair easy with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 74 | CHAIR DINING : FD-16, FD-203, FD-228, FD-279, FD-1105 : Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-1182 |
| 75 | Dismantling, taking out carefully of old existing broken back leg of the chair of any description & replacement of the same with S&F new back leg of Ist class HW (TW), made to shape, fixed in position. |
| 76 | All as per item 8.01 here in before but replacement of front leg with S&F new front leg made out of Ist class HW (TW). |
| 77 | All as per item 8.01 here in before but replacement of side rail with S&F new side rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. |
| 78 | All as per item 8.01 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. |
| 79 | All as per item 8.01 here in before but replacement of stiffener with S&F new stiffener made out of Ist class HW (TW) complete all as shown on drgs. |
| 80 | All as per item 8.01 here in before but replacement of back strip with S&F new back strip made out of Ist class HW (TW) complete all as shown on drgs. |
| 81 | Provn. of new angular bracket with 08 Nos steel screws suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm complete as approved and all as shown on drgs. |
| 82 | Recanning of chair Dining with 2mm wide new plastic cane in Godrej pattern. |
| 83 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 84 | Polishing one coat to old and two coats to new surfaces to Chair Dining with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 85 | SOFA SET OF SORTS : FD-258, FD-281, FD-373, FD-1113 : Dismantle, take out carefully & replace old components of sofa. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty-380 (3 seater-80, S/S-300) |
| 86 | Dismantling, taking out carefully & replacement of old existing broken back leg of the Sofa single/ three seater of sorts of any description, in any position & replacement of the same with S&F new back leg of Ist class HW (TW) made to shape, fixed in position. |
| 87 | Replacement of front leg with S&F new front leg made out of Ist class HW (TW) for sofa single/ three seater. |
| 88 | Replacement of side rail with S&F new side rail for seat made out of Ist class HW (TW) for sofa single/three seater. |
| 89 | Replacement of front/back rail for seat with S&F new front/back rail made out of Ist class HW (TW) for sofa single seater. |
| 90 | Replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class HW (TW) for sofa single seater. |
| 91 | Replacement of top/bottom rail for back frame with S&F new top/bottom rail made out of Ist class HW (TW) for sofa single seater. |
| 92 | Replacement of front support rail with S&F new support rail made out of Ist class HW (TW) for sofa single seater. |
| 93 | Replacement of Arm rest with S&F new Arm rest made out of Ist class HW (TW) for sofa single/ three seater. |
| 94 | Replacement of Batten with S&F new Batten made out of Ist class HW (TW) for sofa single/ three seater. |
| 95 | Replacement of front/back rail with S&F new front/back rail for seat made out of Ist class HW (TW) for sofa three seater. |
| 96 | Replacement of Top/Bottom rail for back frame with S&F new Top/Bottom rail made out of Ist class HW (TW) for sofa three seater. |
| 97 | Replacement of front support rail with S&F new front support rail frames made out of Ist class HW (TW) for sofa three seater. |
| 98 | Replacement of Bearers for seat and back frame with S&F new Bearers for seat and back frame made out of Ist class HW (TW) for sofa three seater. |
| 99 | Removing existing U/S cushion any type & in any position from Sofa single/ three seater and provn of new cushion made of 100 mm thick 'PU' foam, 40 density, ISI marked (Make- Sleepwell/ Godrej/Kurlon) covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern and as per drgs and rest as specified by Engineer-in-Charge /GE. |
| 100 | Polishing one coat to old and two coats to new surfaces to Sofa three seater with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 101 | All as per item No. 9.15 here-in-before but Sofa single seater. |
| 102 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 103 | CHAIR DINING OFFICER (MAP) FD/MAP-II/04 ,FD-E6-MAP-10 Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-400 |
| 104 | Removing old broken/U/S front legs from chair dining and S & F new front legs of Ist class hard wood teak wood as per shape and size shown in drawing complete all as specified and directed. |
| 105 | All as per srl item No. 10.01 here-in-before but rear leg. |
| 106 | All as per srl item No. 10.01 here-in-before but front/ back/ side rail. |
| 107 | All as per srl item No. 10.01 here-in-before but back teak wood strip of size 30x15mm of suitable length. |
| 108 | All as per srl item No. 10.01 here-in-before but stiffner. |
| 109 | S & F new wooden bracket/corners of suitable size made of Ist class hard wood teak to Chair dining cushioned and screwd with railing for extra strength including lacquer polish complete all as directed. |
| 110 | Removing old U/S PU foam cushioned seat from existing chair dining cushioned and S & F new 75 mm thick ,40 density PU foam seat of (Make- Sleepwell/ Godrej/Kurlon) to chair dining duly covered with tapestry cloth of range not less than Rs.250.00 per meter, colour, shade and quality of tapestry Cloth shall be as approved by EIC & GE complete all as specified and directed. |
| 111 | Polishing one coat to old and two coats to new surfaces to Chair Dining Officer (MAP) with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 112 | TABLE WRITING : FD-33, FD-249, FD-275 Dismantle, take out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-75 |
| 113 | Dismantling, taking out carefully & replacement of old existing broken top of Table of any description & replacement of the same with S&F new top of table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE |
| 114 | Replacement of shutters (complete) with S&F 18mm thick Rosewood/ Rosewood Prelaminated MDF exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 115 | Replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge. |
| 116 | Replacement of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed by the EIC/GE |
| 117 | Replacement of drawer with knob Chromium plated 40mm dia with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed by the EIC/GE |
| 118 | Replacement of Leg with S&F new Leg with made out Ist class MP (teak wood) complete all as shown on drgs, and directed by the Engr-in-Charge. |
| 119 | Replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge. |
| 120 | Replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge. |
| 121 | S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 122 | Polishing one coat to old and two coats to new surfaces to Table Writing with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 123 | REPAIRS TO TABLE 900 MM X 900 MM W/O DRAWER (3' x 3') (WOODEN) : FD-88(M), FD-291 Dismantle, take out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-50 |
| 124 | Dismantling, taking out carefully & replacement of old existing broken table top of Table of any decription & replacement of the same with S&F new top of table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 125 | Replacement of legs of table S&F new leg made out of Ist class HW (Teak Wood) |
| 126 | Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge. |
| 127 | S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws etc complete all as specified and directed. |
| 128 | Replacement of Rubber Shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size complete as approved and all as shown on drgs. |
| 129 | Polishing one coat to old and two coats to new surfaces to Table 3' x 3' w/o Drawer with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 130 | BOOK CASE : FD-45(M), FD-237, FD-355 Dismantle, take out carefully & replace old components of book case. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty-90 |
| 131 | Removing of existing U/S top and S & F new top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 132 | Replacement of bottom & S & F new bottom |
| 133 | Replacement of side & S & F new side |
| 134 | Replacement of shelf with S&F 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 135 | Replacement of partition. |
| 136 | Replacement of back ply with S & F new 6mm thick plywood commercial both side Grade I (with BWR Resin). (Make of Ply :- Greenply/ Century/ Duro) |
| 137 | Replacement of Bottom long Stiffner with S & F new M.P. Teak Wood Stiffner |
| 138 | Replacement of Bottom short Stiffner with S & F new M.P. Teak Wood Stiffner |
| 139 | Replacement of Legs with S & F new M.P Teak Wood Legs |
| 140 | Replacement of knobs with S & F new knob Chromium plated 40mm dia. Rest as specified in drg and directed by Engineer-in-Charge/ GE. |
| 141 | Replacement of locks with S & F new locks brass (Make :- Godraj/ Harrison/ Nova) |
| 142 | Replacement of ball spring catcher with S & F new ball spring catcher as specified in drg and directed by Engineer-in-Charge/ GE. |
| 143 | Replacement of Piano type hinges with S & F new Piano type hinges as specified in drg and directed by Engineer-in-Charge/ GE. |
| 144 | Polishing one coat to old and two coats to new surfaces to Book Case with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. |
| 145 | CHAIR WRITING : FD-20(M)/202/280: Dismantle, take out carefully & replace old conponents of chair. Complete all as shown on drg, specificed and directed by Engineer -in-Charge/GE Qty-500 |
| 146 | Dismantling, taking out carefully of old existing broken back leg of the chair of any description, & replacement of the same with S&F new back leg of 1st class HW (TW) made to shape, fixed in position. |
| 147 | All as per item 14.01 here in before but replacement of front leg with S & F new front leg made out of 1st class HW (TW) |
| 148 | All as per item 14.01 here in before but replacement of side rail with S & F new side rail made out of 1st class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. |
| 149 | All as per item 14.01 here in before but replacement of front/ back rail with S&F new front/ back rail made out of 1st class HW (TW) with holes for cane waving. The spacing of holes shall match with the existing rail other side. |
| 150 | All as per item 14.01 here in before but replacement of back strip with S&F new back strip made out of 1st class HW (TW) complete all as shown on drgs. |
| 151 | All as per item 14.01 here in before but replacement of Arm rest with S&F new arm rest made out of 1st class HW (TW) complete all as shown on drgs. |
| 152 | All as per item 14.01 here in before but replacement of stiffner with S&F new stiffner made out of 1st class HW (TW) complete all as shown on drgs. |
| 153 | Provn of new angular bracket with 08 Nos steel screws of suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm. |
| 154 | Recanning of chair with 2mm wide new plastic cane with Godrej pattern. |
| 155 | S&F new nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed. |
| 156 | Polishing one coat of old and two coats of new surfaces to chair writing with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty of the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the articles intact by tightening all parts and carrying out antitermite and antibug treatment. Note : The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alilke new furniture. Please Enable Macros to View BoQ information |
| 157 | Polishing one coat of old and two coats of new surfaces to chair writing with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty of the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the articles intact by tightening all parts and carrying out antitermite and antibug treatment. Note : The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alilke new furniture. Please Enable Macros to View BoQ information |
