Tender For Repair / Renewal Of Wooden Furniture And Steel Furniture At Mil Stn Bharatpur, Bharatpur-Rajasthan

TDR : 55702744

Tender Notice
BOQ

21 Days Left

Bharatpur , Rajasthan

Tender Brief : Tender For Repair / Renewal Of Wooden Furniture And Steel Furniture At Mil Stn Bharatpur

Document Fees
₹ 500 /-

EMD
₹ 99840.0 /-

Tender Value
₹ 49.92 Lakhs /-

Submission Date
18-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Chair dinning (FD-279, FD -276 & FD-228) :-
2	Taking out of old unserviceable wooden front legs of chair Dinning and S & F new legs of chair Dinning including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified
3	All as per items ser No 1.01 but rear legs of chair dinning.
4	All as per items ser No 1.01 but front rail of chair dinning.
5	All as per items ser No 1.01 but rear rail of chair dinning..
6	All as per items ser No 1.01 but side rail of chair dinning.
7	All as per items ser No 1.01 but stiffner of chair dinning.
8	Prepration of surface of chair dinning with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair dinning with best work man ship, rest all as per shown in drawing and complete all as specified
9	Taking down of old canning from chairs dining M&L for recanning of chairs with best quality white plastic cane 2 to 2.5mm wide and border with 4mm wide plastic cane. Weaving of chairs shall be godrej pattern. Rest all shown in Drg and complete all as specified
10	Repair to chair tabular without arms steel (FD-75mm) as under:-
11	Removing unserviceable/worn out seat frame from chair tabular steel without arms and S&F new seat frame made out of second class hard wood duly caned as Godrej pattern. Remaining all as specified on drawing complete all as specified
12	As per ser. item No. 2.01 above but for back frame only.
13	M&L painting, synthetic paint OG one coat to steel frame of chair tabular steel without arms including preparation complete all as specified
14	Repair of Table Bed side (MAP) includes following items (refer Drg. No. FD-/06/MAP/15R):-
15	Supply & Fix top made of Pre-laminated Particle board 18 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing UNSV top all as specified and shown on drg complete all as specified
16	Supply and fix in replacement of chromium plated handle if existing shape and size complete all as specified & shown on drg complete all as specified
17	Supply & Fix new drawer made of commercial plywood 12mm thick BWR grade and front side panel shall be made out of Pre-laminated Particle board 18 mm thick one side teak face exterior grade & bottom side shall be applied of existing size of commercial plywood 6mm thick and also removing of existing unserviceable drawer complete all as specified and shown on drg complete all as specified
18	Supply and fix in replacement of rubber shoe of existing shape and size complete all as specified & shown on drg complete all as specified
19	Material & Labor for removing & scrubbing of old polish by sand/emery paper and preparing old and new surfaces of Table bed side (MAP) as smooth and re polish the same with high gloss French polish all as specified & shown on drg complete all as specified
20	Taking out old UNSV adjustable channel of drawer of table bed side S&F new drawer channel size 400 mm x 40 mm with drawer of table bed side wiith necessary fitting arrangement .Rest all as per shown in drawing and complete all as specified
21	Repair of Table Writing (1145mm x 600mm x 760mm) includes following items (refer Drg No. FD-275/FD-276):-
22	Supply & Fix of new top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top and complete all as specified and shown on drg
23	Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown complete
24	Supply & Fix the side ply of box of 6mm thick one side teak face and other side commercial for table writing including removing of old existing side ply of box and all as specified and shown on drg complete
25	Supply & Fix of new stiffener made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable stiffener and all as specified & shown on drg complete
26	Supply & Fix of new door shutter of box made of Pre laminated Particle board 18 mm thick one side teak face other side white exterior grade incl 6mm thick beading all round including removing of existing unserviceable door shutter of table writing and all as specified and shown on Drg complete
27	Supply & Fix new locks 6 lever 50mm including removing of existing unserviceable locks from drawer and all as specified and shown on Drg complete
28	Supply and Fix of replacement of chromium plated knobs complete all as specified & shown on Drg
29	Supply and fix in Replacement of unserviceable shoe with new PVC hard rubber shoe complete all as specified and shown on drg or as directed by Engr-in-Charge.
30	Material & Labour for removing & scrubbing of old polish by sand / emery paper and preparing old and new surfaces of table writing as smooth and re-polish the same with high gloss French polish all as specified & shown on dig complete
31	Repair to chair revolving tilting/chair computer FD/E6/MAP/01) as under:-
32	Removing the old UNSV/worn out wheels from the chairs, replacing with new nylon wheel duly fitted to the chair with suitable size of screws all as shown in drawing complete all as specified
33	Removing the old UNSV /worn out gas lift mechanism pump from the chair ,replacing with new high quality gas lift mechanism pump along with tilting belt suitable size duly fitted to the chair complete all as specified
34	Removing the old UNSV /worn out arm rest (handle) from the chair, replacing with new 'D' type soft /hard handles of suitable size duly fitted to the chairs with screws/nut and bold at required size complete all as specified
35	Removing the old UNSV stand base from the chairs, replacing with new stand base metal powder coating with nylon wheel of required size to be fitted to the chair at original shape complete all as specified
36	Removing the old UNSV seat from the chair, replacing with new seat made out of 12mm thick molded ply sheet and chemically treated and cushioning covered by fabric/leather cloth as approved by GE complete all as specified
37	Removing the old UNSV back from the chair, replacing with new black made out of 12mm thick molded ply sheet and chemically treated and cushioning covered by fabric/leather cloth as approved by GE complete all as specified
38	Repair of Hat Stand with Mirror includes following items (refer Drg No.FD 233/FD-361/FD-362):-
39	Material & Labour for removing of old existing UNSV ply wood from hat stand complete and replacing the same with new 6 mm thick teak face ply wood BWR grade fixed in the same position of Hat stand complete all as specified and shown on drawing complete
40	Material & Labour for removing of old existing UNSV peg set of hat stand and replacing the same with new peg set in the same position of hat stand complete all as specified and shown complete
41	Material & Labour for removing of old existing UNSV MS key plate of hat stand and replacing the same with new MS Key plate fixed in the same position of Hat stand complete all as specified and shown on drawing complete
42	Material & Labour for removing of old existing UNSV defaced looking mirror of Hat stand complete and replacing the same with new looking mirror fixed in the same position of Hat stand complete all as specified and shown on drg complete
43	Material & Labour for removing & scrubbing of old polish by sand/emery paper and prepairing all the surfaces as smooth and repolish the same with high gloss French polish all as specified & shown on drg complete
44	Repair of Table Dressing Ladies with Mirror Includes following items (refer Drg No.FD-378):-
45	Supply and fix looking mirror of existing unserviceable looking mirror with frame of hard wood 3 back with commercial 6 mm thick plywood conforming to IS. 303 BWR grade on the back of mirror including removal of old mirror all as specified and shown on drg complete
46	Supply & Fix new drawer made out of 1st Class hard teak wood well seasoned providing the lower ply 6mm thick including chromium plated knob including removing of existing unserviceable drawer complete all as specified and shown on drg complete
47	Supply & Fix of new top of table dressing ladies made of block board 18mm thick over paste of laminated sunmica sheet 1mm thick including removing of existing unserviceable Top all as specified and shown on drg complete
48	Supply & Fix new chromium plated knob including removing of existing unserviceable chromium plated knob complete all as specified and shown complete all as specified
49	Supply & fix of new bottom frame including legs of table dressing ladies of existing unserviceable bottom frame including legs all as specified and shown on drg complete
50	Material & Labour for removing & scrubbing of old polish by sand/ emery paper and preparing old and new surfaces of table dressing as smooth and re-polish The same with high gloss French polish all as specified & shown on drg complete
51	Book shelf open small steel:-
52	Taking out existing old shelves of book shelf open small steel , and S&F new in the same place . Shelves should be made of 18 gauge plain sheet (1.2 mm) duly painted by two coats of synthetic enamel paint OG/steel grey over a coat of red oxide primer, rest all as per drawing and complete all as specified
53	M&L for preparing old painted steel surface of book Shelf open small steel and brush/ spray painted with one coats of syntshetic enamel paint(OG)steel grey to all internal and external surfaces complete. Rest complete all as specified
54	Repair of Dressing Mirror gents (MAP) includes following items (Refer Drg No. FD-E6/MAP/16):-
55	Supply and fix looking mirror of size 1200mm x 600mm x 5.5 mm thick with existing beading where as required made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing existing mirror including removal of old mirror all as specified and shown on drg complete
56	Supply & Fix of new 5.5mm thick movable glass shelves including removing of existing unserviceable glass complete all as specified and shown on drg complete
57	Supply & Fix new Magnetic catcher including removing of existing unserviceable magnetic catcher complete all as specified and shown on drg complete
58	Supply & Fix new plywood back side 12 mm thick commercial BWR grade ISI marked confirming to IS-303 Including removing of existing unserviceable plywood top all as specified and shown on drg complete
59	Material & Labour for removing & scrubbing of old polish by sand/emery paper and preparing new and old surfaces of dressing mirror gents as smooth and re-polish the same with high gloss French polish all as specified & shown on drg complete
60	Book case steel FD-1028:-
61	Taking out old UNSV glass of book case steel FD-1028 and S&F new transparent glass of 6 mm thick as specified ISI marked best quality of size as per drg wiith necessory fitting arrangement Rest all as per shown in drawing and complete all as specified
62	M&L for preparing old painted steel surface of book case steel FD-1028 and brush /spray painted with one coats of syntshetic enamel paint(OG) steel grey to all internal and external surfaces complete all as specified
63	Taking out existing old lock of book case steel FD-1028 and S&F new lock with double key (ISI marked, make :- Godrej/ Link) suitable for book case steel. Lock with double key will fixed with shutter of book case steel all as per Drg and complete all as specified
64	Chair dinning JCOs/ORs (FD/MAP/03 & FD/MAP-II/05) :-
65	Taking out of old unserviceable wooden front legs of chair Dinning and S & F new legs of chair Dinning including all wood work surface shall be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & crack, all as per shown in drawing and complete all as specified
66	All as per items ser No 11.01 but rear legs of chair dinning.
67	All as per items ser No 11.01 but front rail of chair dinning.
68	All as per items ser No 11.01 but rear rail of chair dinning..
69	All as per items ser No 11.01 but side rail of chair dinning.
70	All as per items ser No 11.01 but stiffner of chair dinning.
71	Prepration of surface of chair dinning with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair dinning all as per shown in drawing and complete all as specified
72	Taking down of old PVC sheet from chairs dining JCOs/ORs M&L for repair of chair with best quality PVC plastic sheet (Make - AMKO or equivalent and quality of sheet shall be approved by GE) all as shown in drawing and complete all as specified
73	Repair of Peg Table includes following items (refer Drg No.FD-236/FD-277/FD-384):-
74	Supply & Fix of new top made of Pre laminated Particle board 18 mm thick one side teak face other side white exterior grade providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg complete
75	Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg complete
76	Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg complete
77	Supply and fix / Replacement of unserviceable shoe with new PVC hard rubber shoe complete all as specified and shown on drg complete
78	Material & Labour for removing & scrubbing of old polish by sand/emery paper and preparing old and new surfaces of Peg table as smooth and re polish the same with high gloss French polish all as specified & shown on drg complete
79	Repair to GI Charpoy 32 mm (FD-220) as under:-
80	Removing the existing worn out UNSV nylon newer from charpoy GI pipe Supply and fixing cleats of flat iron 40mm x6mm thick (10 Nos per charpoy) not less than 50mm long welded to GI pipe including drilling of holes on each cleats and providing 03 Nos of stiffener of flat iron size of 40 x 6 mm between long to long rail with MS flat 40 x 6mm, 50mm long complete all as specified
81	Tightening of all loose parts check nuts elbows, long rails and short rails etc to hold the charpoy tight to original shape as specified on drawing complete
82	Removing the unserviceable long rails of charpoy GI pipe 32 mm med grade and replacing with new long rail of 32 mm dia med grade GI pipe with ISI marked, duly threaded at both ends (minimum 10 threads for each end complete all as specified
83	Removing the unserviceable short rails from charpoy GI pipe med grade and converting into short rail made out of GI pipes by cutting, threading into short rails (minimum 10 threads) for each ends fixing as specified on drawing complete all as specified
84	Removing the unserviceable legs of charpoy GI pipe 32mm dia med. Grade and converting into legs made out of GI pipes by cutting to size of legs duly threaded at one end and other side base plate made out of 60mm dia 3mm thick MS sheets with proper and smooth welding remain same as specified on drawing complete
85	Removing the unserviceable elbow GI 32mm dia 3 way from charpoy GI pipe frame Supply and fix new elbow 32mm dia 3 way with ISI marked and as specified on drawing complete all as specified
86	Removing unserviceable GI check nut 32mm dia medium grade from charpoy GI pipe. Supply and fix new 32mm dia check nut all as specified and directed.
87	Removing the existing worn out UNSV ply top from charpoy GI pipe as directed by Engineer-in-charge.
88	Supply and fixing of flat Iron size of 40 x 6 mm 10 Nos from each charpoy GI pipe 32 mm with two support flate Iron 40 x 6 mm and four nos fixing and welding each charpoy all as per shown in drg & complete all as specified
89	Supply and fixing new ply BWR 6.5' x 3' x 12 mm thick ISI marked on top with flate head nut & bolt size 10mm x 75mm long (10 Nos) with washer, rest all as shown in drg complete all as specified
90	Taking out Old UNSV (FMN set) for charpoy GI 32mm and S&F new U type FMN set made of 15mm round MS tube of size 1mm thick complete all as specified
91	Table (900mm x 900mm x 760mm) (FD-291 & FD-223 ) :
92	Taking out of old unserviceable top of table (900mm x 900mm x 760 mm) and S & F new top of table (900mm x 900mm x 760 mm) encluding 4 mm thick teak wood beading around of top. Top should be made of 18 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white complete all as specified
93	Taking out of old unserviceable legs of Table (900 x 900 x 760 mm) and S & F new legs of table (900 x 900 x 760 mm) including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing and complete all as specified
94	All as per items ser No 14.02 but top rail of table (900mm x 900mm x 760 mm).
95	Preparation of surface of table (900mm x 900mm x 760 mm) with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table (900mm x 900mm x 760 mm) with best work man ship, rest all as per shown in drawing and complete all as specified
96	Repair to chair verandah (FD-19(M)/256/259) as under:-
97	Removing old worn out/UNSV plastic cane from chair verandah, welding the loose/broken portion of chair frame wherever required and applying one coat of synthetic enamel paint white on frame. Re caning the chair with 5mmx0.4mm thick plastic cane good quality (recycled cane shall not be used). Provided with 04 Nos rubber shoes to legs of chair verandah complete all as specified
98	Repair to teapoy verandah FD-383 & FD/E6/MAP/17 are as under:-
99	M&L welding frame of old tea poy verandah and making good condition for fixing of new top and apply one coat of synthetic enamel black/white paint and providing hard rubber shoes 04 Nos for each frame at legs side complete all as specified
100	Removing unserviceable top of tea poy verandah and providing new top of size 900x450mm, made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick all round the top, duly French polished complete all as specified
101	Chair School with hard board FD/E6/MAP/05
102	M&L welding frame of old Chair school and making good condition for fixing of new hard board and apply one coat of synthetic enamel black paint and providing hard rubber shoes 04 Nos for each frame at legs side complete all as specified
103	Book self open large steel FD-69(M)):-
104	Removing of old UNSV shelves of book shelf open large steel and S&F new shelves on the same place with proper nut bolt /welding. Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint OG steel grey over a coat of red oxide primer complete all as specified
105	M&L for preparing old painted steel surfaces of book self open large steel and spray painted with one coat of synthetic enamel paint (OG/ steel grey) to all internal and external surface complete all as specified
106	Repair to form without back of size (1800mm x 255mm) FD-1027
107	M&L welding frame of old form without back and making good condition for fixing of new wooden plank and apply one coat of synthetic enamel black paint and providing hard rubber shoes 04 nos for each frame at leg side complete all as specified
108	Removing old UNSV/broken wooden plank and S&F new top made out of 25 mm thick and 1st class hardwood of size 1900mm x 305mm duly painted with golden brown paint over one coat of primer and fixed to the frame with suitable nut bolt with washer and screw all as per drawing complete all as specified
109	Repair of Table Centre includes following items (refer Drg No.FD-274 & FD-235):-
110	Supply & Fix of new top made of Pre-laminated Particle board 18 mm thick one side teak face other side white exterior grade including providing 6mm thick hard teak wood beading all round including removing of existing unserviceable top all as specified and shown on Drg complete
111	Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable legs all as specified & shown on Drg complete
112	Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable long rail complete all as specified
113	Supply & Fix of new short rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable short rail complete all as specified
114	Repair of Bed Ply Wood Top includes following items (refer Drg No. FD-246/FD-247 ):-
115	Supply & Fix of new long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame including removing of existing unserviceable long rail complete all as specified
116	Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including covered with 12mm thick half cut beading both side of head board of Bed hard including removing of existing unserviceable ply wood from existing head board of Bed plywood complete all as specified
117	Supply & Fix new plywood 4mm thick one side teak face other side commercial ISI mark BWR grade including with 12mm thick half cut covered with beading both side of foot board of Bed hard including removing of existing unserviceable ply wood from existing foot board of Bed plywood top complete all as specified
118	Supply & Fix new plywood top 12mm thick commercial BWR grade ISI marked confirming to IS-303 including removing of existing unserviceable plywood top all as specified and shown on drg complete
119	Supply & Fix of new bottom rail made out of 2nd Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable bottom rail all as specified & shown on drg complete all as specified
120	Supply & Fix of new legs of head board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of head board all as specified & shown on drg complete
121	Supply & Fix of new legs of foot board made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable legs of foot board complete all as specified
122	Supply & Fix of new corner cleats made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable corner cleats and all as specified & shown on drg complete
123	Material & Labour for removing & scrubbing of old polish by sand/emery paper and preparing new and old surfaces of bed ply wood top as smooth and with high gloss french polish all as specified & shown on drg complete
124	Repair to charpoy GI folding with nylon newer as under:-
125	Removing the existing worn-out nylon newar from charpoy GI folding tightening the charpoy after completing necessary welding works to charpoy wherever required and replacement of UNSV nut, bolt and washer of required length and size wherever required, tighting the frame properly. Supply nylon newar 50/55mm wide, virgin quality and re-weaving closely with the charpoy frame (nylon newar shall not be manufactured from recycled material) all as specified
126	Repair of Chair Dining Offrs includes following items (refer Drg No. FD/MAP/II/04):-
127	Supply & Fix of new back rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing existing unserviceable rail all as specified & shown on drg complete
128	Supply & Fix of new front legs made out of 1st Class hard teak wood well seasoned tree from cracks & dead knots and removing existing unserviceable front legs all as specified & shown on drg complete
129	Supply & Fix of new rear legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable rear legs all as specified & shown on drg complete
130	Supply & Fix of new stiffener made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable stiffener all as specified & shown on drg complete
131	Supply & Fix of new back rest made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing existing unserviceable back rest all as specified & shown on drg complete
132	Removing of old existing unserviceable cushion foam with cover existing size and Supply & Fix new cushion foam sheet 75mm thick and having 40 density duty covered with tapestry cloth not less than Rs.350 per meter fabric fitted on 12mm thick commercial plywood BWR grade of existing size and shown on drg complete all as specified. Make-Sleep well/Kurlon/Godrej/ISI Marked.
133	Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified & shown on drg complete all as specified
134	Material & Labour for removing & scrubbing of old polish by sand/ emery paper and preparing old and new surfaces of chair dining as smooth and re-polish the same with high gloss French polish all as specified & shown on drg complete
135	Table without drawer (900mm x 600mm x 760mm) (FD-223, FD-284) :
136	Taking out of old unserviceable top of table without drawer (900 x 600 x 760) mm and S & F new top of table without drawer (900 x 600 x 760 mm) Including 4 mm thick teak wood beading around of top. Top should be made of 18 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, all as per shown in drawing and complete all as specified
137	Taking out of old unserviceable legs of table without drawer (900mm x 600mm x 760 mm) and S & F new legs of table without drawer (900mm x 600mm x 760mm) including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & crack, all as per shown in drawing and complete all as specified
138	All as per items ser No 24.02 but top (long) rail of Table without Drawer (900mm x 600mm x 760mm).
139	All as per items ser No 24.02 but top (short) rail of Table without Drawer (900mm x 600mm x 760mm).
140	All as per items ser No 24.02 but lower side rail of Table without Drawer (900mm x 600mm x 760mm).
141	All as per items ser No 24.02 but Stiffner of table with out drawer (900mm x 600mm x 760mm).
142	Prepration of surface of table without drawer with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table without drawer with best work man ship,rest all as per shown in drawing complete
143	Repair of Side board Includes following items (refer Drg No. FD-371 & FD-372 ):-
144	Supply & Fix of new top of Side board made out of block board 18mm thick over paste sunmica 1mm thick including removing of existing unserviceable Top all as specified and shown on drg complete
145	Supply & Fix of new sides of side board made out of block board 18 mm thick over paste 4mm thick teak face veneer including removing of existing unserviceable side all as specified and shown on drg complete
146	Supply & Fix of new back of side board made of commercial ply wood 6 mm thick conforming to IS: 303 BWR grade including Removing of existing unserviceable back Ply wood all as specified and shown on drg complete
147	Supply & Fix of new drawer complete made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl lower ply of drawer including removing of existing unserviceable drawer complete all as specified & shown on drg complete
148	Supply and fix in replacement of chromium plated knobs complete all as specified & shown on drg complete all as specified
149	Supply & Fix of new door shutter made out of Pre laminated Particle board 18 mm thick one side teak face other side white exterior grade incl 4 mm thick beading all round including removing of existing unserviceable door shutter of Side board all as specified and shown on drg complete
150	Material & Labour for Bottom frame including legs made out of 1st class hard teak wood free from crack & dead knots where read and removing existing all as specified and shown on drg complete
151	Material & Labour for removing & scrubbing of old polish by sand/emery paper and preparing old and new surfaces of side board as smooth and re polish the same with high gloss French polish all as specified & shown on drg complete
152	Table with drawer (900mm x 600mm x 760mm) (FD-283) :
153	Taking out of old unserviceable top of table with drawer (900mm x 600mm x 760mm) and S & F new top of table with drawer (900mm x 600mm x 760mm) including 4 mm thick teak wood beading around of top. Top should be made of 18 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, all as per shown in drawing complete all as specified
154	Taking out of old unserviceable legs of table with drawer (900mm x 600mm x 760mm) and S & F new legs of table with drawer (900mm x 600mm x 760mm) including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, all as per shown in drawing complete all as specified
155	All as per items ser No 26.02 but top (long) rail of table with drawer (900mm x 600mm x 760mm)
156	All as per items ser No 26.02 but top (short) rail of table with drawer (900mm x 600mm x 760mm)
157	All as per items ser No 26.02 but lower side rail of table with drawer (900 x 600 x 760mm).
158	All as per items ser No 26.02 but stiffner of table with drawer (900mm x 600mm x 760mm)
159	Prepration of surface of table with drawer with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of table with drawer with best work man ship, all as per shown in drawing complete all as specified
160	Taking out of old unserviceable drawers of table with drawer (900 x 600 x 760mm) and S & F new drawers of table with drawer (900 x 600 x 760mm) including best quality fancy type PVC knob 32 mm dia, all as per shown in drawing complete all as specified
161	Repair of Sofa Set 5 Seater/4 seater includes following items (refer Drg No. FD-281, FD-373)-and FD/MAP-II/02):-
162	Removing old existing unserviceable cushion cover 21'' x 22\\" x 4\\" and Supply & Fix new cushion cover made out of approved quality tapestry cloth not less than Rs.350/- per meter duly stitched with fine standard thread and providing best quality chain with runner on one side all as specified and shown on drg complete all as specified
163	Removing of old existing unserviceable cushion foam ISI marked with cover 21\\" x 22\\" x 4\\" and Supply & Fix new cushion foam sheet 100 mm thick and having 40 density duly covered with tapestry cloth not less than Rs.350/- per meter duly stitched with fine standard thread and providing best quality chain with runner on one side all as specified and shown on drg complete all as specified. Make – Sleep well/Kurlon/Godrej.
164	Supply & Fix of long rail of sofa set 5 seater made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing of old unserviceable long rail all as specified & shown on complete
165	Supply & Fix of new legs made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old unserviceable legs all as specified & shown on drg complete
166	Supply & Fix of new batten strips made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old unserviceable batten strips all as specified & shown on drg complete
167	Supply & Fix of new arm rest made out of 1st Class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing old existing arm rest all as specified & shown on drg complete
168	Material & Labour for removing & scrubbing of old polish of sofa set 5 seater by sand/emery paper and preparing all the surfaces as smooth and re-polish the same with high gloss French polish all as specified & shown on drg complete
169	Material & Labour for removing & scrubbing of old polish of sofa set 4 seater by sand/emery paper and preparing all the surfaces as smooth and re-polish all as specified & shown on drg complete
170	Teapoy wooden (600mm x 450mm x 540mm) (FD-278, FD-382) :
171	Taking out of old unserviceable top of teapoy wooden 600mm x450mm x540mm and S & F new top of teapoy wooden including 3 mm thick teak wood beading around of top. Top should be made of 18/19 mm thick prelaminated particle board bonded with phenol fromaldehyde confirming IS- 3087-1985 one side decorative type other side balancing white, rest all as per shown in drawing complete all as specified
172	Taking out of old unserviceable legs of teapoy wooden and S & F new legs of teapoy wooden including all wood work surface shall be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st grade hard wood well seasoned (teak wood) free from all knots & creck, all as per shown in drawing complete all as specified
173	All as per items ser No 28.02 but long rail of teapoy wooden complete all as specified.
174	All as per items ser No 28.02 but short rail of teapoy wooden complete all as specified
175	All as per items ser No 28.02 but Stiffner of teapoy wooden complete all as specified
176	Prepration of surface of teapoy wooden with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of teapoy wooden with best work man ship, all as per shown in drawing complete all as specified
177	Repair of Table Dressing Gents includes following items (Refer FD-230/379):-
178	Removing of unserviceable/defected looking mirror of existing and providing new looking mirror of same size duly framed with hard teak wood and including replacement of ply wood with new commercial 6 mm thick plywood conforming to IS 303 BWR grade on the back of mirror all as specified and shown on drg complete all as specified
179	Supply & Fix new top of table dressing gents made of commercial ply wood 12 mm thick, conforming to IS. 303 BWR grade including over paste of laminated sunmica 1mm thick and removing of existing unserviceable ply & sunmica all as specified and shown on dig complete
180	Supply & Fix new drawer made out of plywood commercial 12mm thick over paste of laminated sunmica sheet 1mm thick including providing the lower ply 6mm thick and chromium plated knob including removing of existing unserviceable drawer complete all as specified and shown on drg
181	Supply and fix in replacement of chromium plated knob complete all as specified & shown on drg
182	Supply and fix in replacement of MS key plate complete all as specified & shown on drg or complete all as specified
183	Material & Labor for removing & scrubbing of old polish by sand/emery paper and preparing old and new surfaces of table dressing as smooth and re-polish the same with high gloss French polish all as specified & shown on drg complete
184	Repair of Chair Computer includes following items (Refer Drg No. FD/E6/MAP/01):-
185	Supply & Fix base legs of chair computer including removing existing base legs and all as specified and shown on drawing complete
186	Supply & Fix ball coaster 50mm in base of chair computer including removing existing ball coaster and all as specified and shown on drawing complete
187	Supply & Fix seat and back incl tapestry cloth of chair computer including removal of existing all as specified and shown on drawing complete
188	Supply & Fix new set of arm rest of chair computer including removing existing unserviceable set of arm rest arm rest and all as specified and shown on drawing complete
189	Supply & Fix new up down piston assy with cover of chair computer including removing existing unserviceable up down piston assy with cover and all as specified and shown on drawing complete
190	Material & Labour for removing paints by cutting/scrubbing from chair computer and continuous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing complete
191	Repair of Stool Dressing includes following items (refer Drg. No. FD-252/FD-282):-
192	Supply & Fix in repair of legs made out of 1st class hard teak wood well seasoned free from cracks & dead knots incl tightening the whole frame and removing of existing unserviceable legs all as specified & shown on drg complete
193	Supply & Fix short rail made out of 1st Class hard leak wood well seasoned free from cracks & dead knots and removing of existing unserviceable short rail all as specified & shown on drg complete
194	Supply and Fix long rail made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing of existing unserviceable long rail all as specified & shown on drg complete all as specified
195	Supply & Fix stiffener made out of 1st Class hard teak wood well seasoned free from cracks & dead knots and removing of existing unserviceable stiffener all as specified & shown on drg complete
196	Removing existing unserviceable cane from stool dressing CB and reweaving the same with new cane plastic 2mm half round of Shah/Premier make Godrej pattern and providing 4 mm wide border complete all as specified & shown an drg
197	Material & Labour for removing & scrubbing of old polish by sand/emery paper and preparing old and new surfaces of Stool Dressing as smooth and re-polish the same with high gloss French polish all as specified & shown on drg complete
198	Chair easy (FD-229 ) :-
199	Taking out of old unserviceable wooden front legs of chair easy and S & F new front legs of chair easy including all wood work surface shall be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing complete all as specified
200	All as per items ser No 32.01 but rear legs of chair easy.
201	All as per items ser No 32.01 but back frame of chair easy.
202	All as per items ser No 32.01 but side frame of chair easy.
203	All as per items ser No 32.01 but front frame of chair easy
204	All as per items ser No 32.01 but front leg of chair easy.
205	All as per items ser No 32.01 but arms of chair easy.
206	Prepration of surface of chair easy with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair easy with best work man ship, rest all as per shown in drawing complete all as specified
207	Taking out of old canning from chairs easy M&L for recanning of chairs with best quality white plastic cane 2 to 2.5mm wide and border with 4mm wide plastic cane. Weaving of chairs shall be godrej pattern. Rest all shown in Drg complete all as specified
208	Repair of Table Dining 4 person (1200mm x 900mm), 6 person(1500mm x 900mm) & 8 Persons (1800mm x 900mm) includes following items (refer Drg No FD-273,FD-376,FD/MAP-II/09,FD/MAP-II/03
209	Supply & Fix of new top of table dining 8 person made of Pre laminated Particle board 18 mm thick one side teak face other side white exterior grade including providing 6mm thick hard teak wood beading all round including removing of existing unserviceable top all as specified and shown on drg complete
210	Supply & Fix of new top of table dining 6 person made of Pre laminated Particle board 18 mm thick one side teak face other side white exterior grade incl providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg complete
211	Supply & Fix of new top of table dining 1200mm x 900mm made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade including providing 6mm thick hard teak wood beading all round including removing of existing unserviceable Top all as specified and shown on drg complete
212	Supply & Fix of new legs of table dining 4 person (1200mm x 900mm) made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable legs all as specified & shown on drg complete
213	Supply & Fix of new long rail of table 8 person (1800mm x 900mm) made out of 1st Class hard teak wood from cracks & dead knots including tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg complete
214	Supply & Fix of new long rail of table dining 6 person (1500mm x 900mm) made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on Drg complete
215	Supply & Fix of new long rail of table dining 1200mm x 900mm made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable long rail all as specified & shown on drg complete
216	Supply & Fix of new short rail of table dining 4//6/8 person made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including tightening the whole frame including removing of existing unserviceable short rail all as specified & shown on Drg complete
217	Supply & Fix of new corner cleats made out of 1st Class hard teak wood well seasoned free from cracks & dead knots including removing of existing unserviceable corner cleats all as specified & shown on drg complete all as specified
218	Supply and fix in Replacement of unserviceable shoe with new PVC/hard rubber shoe complete all as specified and shown on drg complete all as specified
219	Material & Labour for removing & scrubbing of old polish by sand/emery paper and preparing old and new surfaces of table dinning 4/6/8 persons as smooth and re polish the same with high gloss French polish all as specified & shown on Drg complete
220	Chair writing (FD-280, FD-202) :-
221	Taking out of old unserviceable wooden front legs of chair writing and S & F new legs of chair writing including all wood work surface shall be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (Teak Wood) free from all knots & crack rest all as per shown in drawing complete all as specified
222	All as per items ser No 34.01 above but rear legs of chair writing complete all as specified.
223	All as per items ser No 34.01 above but front rail of chair writing complete all as specified.
224	All as per items ser No 34.01 above but rear rail of chair writing complete all as specified.
225	All as per items ser No 34.01 above but side rail of chair writing complete all as specified.
226	All as per items ser No 34.01 above but stiffener of chair writing complete all as specified.
227	All as per items ser No 34.01 above but Arms of chair writing complete all as specified.
228	Taking out of old unserviceable pvc hard rubber ring from various types legs of wooden chairs writing and S & F new pvc hard rubber ring on the legs of wooden chairs writing. PVC hard rubber ring should be best quality & not less than 25mm , rest all as per shown in drawing complete all as specified
229	Prepration of surface of chair writing with fixing all loose wooden parts of furniture by well skilled work men ship and M&L two coat french polish on all exposed surface of chair writing with best work man ship, rest all as per shown in drawing complete all as specified
230	Taking out of old canning from chair writing M&L for recanning of chair with best quality white plastic cane 2 to 2.5mm wide and border with 4mm wide plastic cane. Weaving of chair shall be godrej pattern. Rest all shown in Drg complete all as specified
231	Charpoy Folding IP with hard top(FD-388R) :-
232	Taking out old unserviceable ply top from each charpoy folding IP with hard top and S&F new plywood BWR 1930mm x 900mm x12 mm thick ISI marked on top with necessary fitting arrangement. rest all as per shown in drg complete all as specified
233	M&L for preparing old painted steel surface of charpoy folding IP with hard top and brush /spray painted with one coats of syntshetic enamel paint (silver) to all external surfaces complete all as specified
234	Repair to locker bed side steel (FD-257 & FD-1029 )as under:-
235	Removing of UNSV hinges from shutters S&F of new hinges 75mm by welding on drawing complete all as specified
236	Removing UNSV haps and staples from lockers S&F of new haps and staples 75mm steel CP duly welded to the locker shutters in original shapes all as specified on drawing complete
237	Removing of UNSV handles from lockers S&F of new handles 100mm steel CP{c type} duly welded to the locker shutter in original shape all as specified on drawing complete
238	Material and labor for scraping of old paint and applying in 1 coat of synthetic enamel olive green/steel grey paint over 1 coat of steel primer paint by spray painting, applying putty and making smooth of surfaces complete before painting to the lockers steel inside and outside surfaces including legs all complete all as specified on drawing complete all as specified
239	Repair to Almirah large/med/small steel (FD-67,243,1031and 1032)as under:-
240	Removing of UNSV 3 way locking device and providing S&F of new locking device 3 way and fixing them to almirah large/med/small and making original shape complete welding to the Almirah all as specified on drawing complete
241	Removing of unserviceable locks and providing new locks of size 50mm,six levers with stainless steel keys in duplicate for Almirah large/medium/small steel with shelves and fixing them with existing with 3 way locking system all as specified on drawing complete
242	Removing of unserviceable broken handles & providing new handle steel chromium plated 100mm to Almirah large/med steel with shelves & fix suitably as specified on drawing complete all as specified
243	Removing unserviceable shelves of Almirah large steel with shelves and providing new duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting and providing necessary cleats/nuts and bolts etc complete all as specified on drawing complete
244	All as per item No- 37.04 above but shelves for almirah med/small steel complete all as specified.
245	Removing denting wherever required in Almirah large/med/small steel with sleeves complete all as specified on drawing complete all as specified
246	Spray painting to both external and internal surfaces of Almirah large steel with shelves with one coat of synthetic enamel paint in olive green/steel grey colour scraping and welding, wherever necessary and applying putty and making smoothening of surfaces complete before painting all as specified on drawing
247	All as per item No. 37.07 above but for Almirah med/ small steel complete all as specified.
248	Almirah Large Steel Glazed FD-104M,) :
249	Taking out old UNSV glass of almirah large steel glazed and S&F new transparent glass made of 6 mm thick as specified ISI marked best quality of Size 750 mm x 230 mm wiith necessory fitting arrangement rest all as per shown in drawing complete all as specified
250	M&L for preparing old painted steel surfaces of steel almirah Glazed Steel (large) and painted to all internal and external surfaces complete by spray/Brush with one coat of synthetic enamel paint(OG)/steel grey complete all as specified
251	Repair to table office clks steel (FD-84M,1007 & FD-1004M) as under:-
252	Removing unserviceable locks & drawers providing new drawer brass locks and providing new drawer brass lock with stainless steel duplicate keys for tables all as specified on drawing complete
253	Removing the UNSV table top and providing new top of size 1220mm length x 610mm width, made out of 18mm thick pre-laminated particle board including 4mm thick teak beading all round the table top complete duly French polished all as specified on drawing complete
254	Removing the UNSV drawers handles of tables office Clk steel and providing new handles MS plastic coating plastic fiber rectangular type and fixing to the tables complete all as specified
255	Painting complete table by means of spray painting with one coat of synthetic enamel paint OG/ steel grey colour to the table frames, drawers and drawer cabinet in side out side after preparation of surfaces by scrapping after completion of necessary welding work wherever required all as specified on drawing complete
256	Charpoy IP with hard top FD/MAP-II/01, FD/MAP-04;-
257	Taking out old unserviceable ply top from each Charpoy IP with hard top; and S&F new plywood BWR 1930mm x 900mm x12 mm mm thick ISI marked on top with nacessary fitting arengement. rest all as per shown in drg complete all as specified
258	M&L for preparing old painted steel surface of Charpoy IP with hard top and brush /spray painted with one coats of synthetic enamel paint (black) to all external surfaces complete all as specified
259	Taking out old UNSV PVC shoe of charpoy IP with hard top and S&F new Hard PVC shoe of shall be provide at bottom of legs, PVC Shoe made best quality . All as per shown in drg complete all as specified
260	Repair to table dining (FD-165(M) as under:-
261	M&L welding frame of old table dining OR’s and making good condition for fixing of top and apply one coat of synthetic enamel black paint and providing hard rubber shoes 04 Nos for each frame at leg side all as directed by Engineer-in-charge.
262	Removing unserviceable top of table dining ORs and providing new top made out of 18mm thick plain particle board of size 1900mm x 685mm covered with 22 gauge superior quality aluminum sheet and fixing with suitable size of screws to table frame all as per drawing comlete
263	Bed hard steel FD/E6/MAP/18R :-
264	Taking out old unserviceable ply top from each bed hard steel FD/E6/MAP/18R and S&F new plywood BWR 1930mm x 900mm x12 mm thick ISI marked on top with necessary fitting arengement all as per shown in drg complete all as specified
265	M&L for preparing old painted steel surface of bed hard steel and brush /spray painted with one coats of synthetic enamel paint (black) to all external surfaces complete all as specified
266	Repair to chair tubular with arms steel (FD-75mm & 75mm) as under:-
267	Removing unserviceable/worn out seat frame from chair tabular steel with arms and S&F new seat frame made out of second class hard wood duly caned as Godrej pattern. All as per on drawing complete all as specified
268	All as per ser. item No 43.01 above but for back frame only.
269	M&L painting, synthetic paint OG one coat to steel frame of chair tabular steel with arms including preparation complete all as specified
270	Removing unserviceable/worn out handle from chair tabular steel with arm and S&F new handle made out of second class hard wood duly two coats of black colour synthetic enamel paint black over a coat of pink primer all as specified on drawing complete
271	Repair to table office offr steel (FD-84M & 1003) as under:-
272	M&L painting complete table by means of spray painting with one coat synthetic enamel paint OG /steel grey color to the table frames, drawers and drawer cabinet inside and outside after preparation of surfaces by scrapping as directed after completion of welding work where-ever required all as specified on drawing complete
273	Chair writing Steel Includes following items (Refer Drg No. FD/E6/MAP/12):-
274	M&L for removing existing UNSV seat and back with foam cushion incl tapestry cloth and S&F the same of chair writing steel all as specified and shown on drawing complete
275	M&L for removing existing UNSV set of arms rest and S&F new arms rest set of chair writing steel all as specified and shown on drawing complete
276	Material & Labour for removing paints by cutting/scrubbing from chair writing steel and continuous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint black all as specified complete
277	Repair to table 900mm x 600mm with drawer and with out drawer FD-1007/1008 as under:-
278	Removing the UNSV/ broken table top and providing new top of size 900mm x 600 mm made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick all round the table top complete duly French polished all as shown on drawing and specified.
279	Repair to table 900mm x 900mm (FD-1009) as under:-
280	M&L welding frame of old table 900mm x 900mm and making good condition for new fixing of top and apply one coat of synthetic enamel olive green steel grey paint and providing hard rubber shoes 04 Nos for each frame at leg side complete all as specified
281	Removing unserviceable/broken top of table and providing new top made out of 18mm thick pre-laminated particle board including teak wood beading 4mm thick all round the table top, duly French polished complete all as specified Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Furniture Tenders

Furniture Items Tenders

Wooden Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair / Renewal Of Wooden Furniture And Steel Furniture At Mil Stn Bharatpur, Bharatpur-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair / Renewal Of Wooden Furniture And Steel Furniture At Mil Stn Bharatpur, Bharatpur-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us