|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and not exc 50 mm thickness complete all as specified and as directed. |
| 2 | M & L Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0. 7-1 kg/sqm on surface o WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer including cleaning complete all as specified and as directed. |
| 3 | M&L For Premix bituminous, macadam compacted thickness 75 mm or less with 4% binder content by wight of total mix using VG-30 bitumen of any penetration laid /rolled to required gradint and camber using power roller 8-12 tonnes complete all as specifed and as directed |
| 4 | M & L Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0 .2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MaRTH specification for road and bridge works 2013, using mechanical sprayer including cleaning of existing surface complete all as specified and as directed. |
| 5 | M&L for providing Bituminous premix semi dence asphaltic dense concrete 40mm thick compacted with 5.5 % binder content as in semi-dense asphaltic concrete total mix rolled with 8 to 12 tonne power roller and complete to required camper and gradient complete all as specifed and as directed. |
| 6 | S&F in repairs Solar Light Road studs LED based of size (125x125x25mm) (Model -DA-110-DHRUV of SINOR ) with Aluminium alloy body and Solar powered by nionocrystal solar panel with one high capacity NI-CD Recahrgeable battery and three LED on each side (total six LEDs) fixed with araldite solution /12 mm dia 125 mm long pointed nails complete all as specified and as directed |
| 7 | Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size (110mm x 120mm x 24 mm) with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction complete all as specified and as directed. |
| 8 | M & L for preparing bituminous surfaces of road marking upto 15 cm width and 2.5mm thick on centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint (Hot melted mixture of resins, glass beads, pigments, and fillers) of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed. |
| 9 | Supply and fixing in repairs metal tubular delinator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height above ground level duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) (450x450x450mm) type B1 complete all as specified and as directed. |
| 10 | Manufacturing, supplying and fixing in repairs retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 600 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. angle iron of size (25x25x3 mm) along with theft resistant measures, mounted and fixed with 2 Nos. S.S. angles of size (35x35x5 mm) to a vertical post made up to M.S. Tee section S.S (50x50x6 mm) welded with base plate of size (100x100x5 mm) at the bottom end embedding in PCC (1:2:4) (600X600X600 mm) and including making holes in pipes, angles flats, providing & fixing S.S. message plate of required size.Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.complete all as specified and as directed. |
| 11 | Manufacturing, supplying and fixing in repairs retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge complete all as specified and as directed |
| 12 | Manufacturing, supplying and fixing in repairs Retro reflective regulatory sign board of size 600 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to S.S. frame of size (40x40x4 mm). The boards will be fixed to 1 No. (50x50 mm) square post made of S.S. angle (50x50x4 mm), 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge complete all as specified and as directed |
| 13 | M & L for 1000 mm dia Convex Mirror incl installation Kits , bolts ,nuts etc.incl necessary excavation ,PCC (1:3:6) for foundation size 600x600x600 mm and 50mm bore MS post for fixing of convex mirror incl painting and taking down old one all as directed by Engr-in-Charge. complete all as specified and as directed. Please Enable Macros to View BoQ information |
