|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 3 | Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover filletts complete all as specified and directed by Engineer-in-Charge. |
| 4 | S&F asbestos cement building board 4mm thick of size 595x595mm with decorative finish fixed to GI powder coated snap grid frame work with screw in ceiling complete all as specified and directed. |
| 5 | M&L for GI powder coated snap grid frame work for false ceiling of approved (ISI marked) make fixed to galvanised iron steel angle grid 600x600mm size suspended system fixed to GI framed work with main runner (32x24x6.5)mm cross tee (27x24x2.5)mm and moulding (19x19)mm of approved make and section as specified in SSR Part II with suitable hook/fasteners and GI/aluminium suspenders not less than 4mm dia upto 1200mm length @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag including ceiling cleats made out of GI flat iron 40x3mm size 60mm long and expansion hold fastner 12.5 mm dia 40mm long complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | M & L for glazed ceramic coloured tiles joint free of size 350x250 x 7 /450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 9 | M&L for 10 mm thick Vitrified ceramic tiles, light shade double charged (square/recangular) area of each tile n exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed. |
| 10 | M&L for 10 mm thick Vitrified ceramic tiles, light shade double charged (square/recangular) area of each tile n exceeding 0.72 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed. |
| 11 | M&L for Machine cut kota stone slab flooring 20-22mm thick, laid over cement screed base laid and jointed with and including 15mm thick screed bed in CM 1:6 laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all complete as specified and directed. |
| 12 | Demolition of cement concrete (unreinforced) in ground floor and paving of any thickness (below or above ground) complete all as specified and directed. |
| 13 | M&L for 75mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed. |
| 14 | M&L for PCC 1:2:4 type B-1 ( 20mm graded stone agg) 50 mm thick as in floor,coping etc complete all as specified and directed. |
| 15 | M&L for 25 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed. |
| 16 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqmm (M-35 grade) without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed. |
| 17 | M&L 20-25mm thick plastic coated coloured chequered tiles, area of each tile exc 0.05sqm but n.exc 0.09sqm with and incl 20mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed. |
| 18 | M&L for outdoor Heavy duty coloured vitrified paving tiles , textured surfaces with high skid resistance , scratch resistance, impact resistant, joint free (edge cut) of size 400mm x 400mm x 8-10mm thick as in floor etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.. |
| 19 | S&F in repair venetian blinds in double layers roller type of approved colour including all accessories, fitting/fixtures required for fixing the same in windows ,highly durable ,lightweight,moisture proof,made of PVC/Polymer /Vinyl etc complete all as specified and directed. |
| 20 | M&L 20mm thick Granite telephonic black (of any type) tiles machine cut, in skirting/ dado laid over and including cement screed 15mm thick in CM (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 21 | Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 22 | M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified and directed |
| 23 | M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface mixed with liquid water proofing compound @ 200 ml per bag cement or as per manufacturer's instructions , finished fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins and applying treatment for ATT on the same wall etc as per manufacturer's instructions, if any required at site for entire completion of work all as specified. Note : (i) Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’. (ii) The Total cost for ATT (Anti Termite Treatment) will be included under this item of Sch ‘A’. |
| 24 | M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed. |
| 26 | M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camoflage pattern, as per manufactures instructions etc complete all as specified and as directed. Note :- Primer to be carried out through air less spray machine (Mechanical means) incl cleaning of existing windows/doors/floor etc. |
| 27 | M&L for preparation of new plastered surface of ceiling applying three coat of white wash by using mechanical device complete all as specified and as directed. |
| 28 | M&L for preparation of new surfaces of walls and applying two coat of oil bound distemper white or tinted by using mechanical device complete all as specified and as directed.. |
| 29 | Dismantling of AC / fibre / steel sheets and the like (corrugated/semi corrugated/plain) in roof covering incl ridge complete all as specified and directed. |
| 30 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall,fixed with self tapping screws as specified. Note:-work to be carried out upto 25.00m ht with necessary MS scaffolding including all other safety precautions. |
| 31 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 1.00mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding/valley gutter to wall,fixed with self tapping screws as specified.Note:-work to be carried out upto 25.00m ht with necessary MS scaffolding including all other safety precautions. |
| 32 | M&L in repair for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410 -W(Gde-E- 250) quality-A all as specified and directed.Note:-work to be carried out upto 25.00m ht with necessary MS scaffolding including all other safety precautions. |
| 33 | S&F in repair mild steel works as in wind ties for roof incl securing bolts; posts and struts in fencing incl cutting tops to shape as directed ,drilling holes,notching for wire,etc;flat iron fillets (for securing wire mesh etc) incl all necessary drilling,bolting or riveting etc and similar work conforming to Fe 410-0 or Fe 310-0 upto any height of bldg complete all as specified and directed.Note:-work to be carried out upto 25.00m ht with necessary MS scaffolding including all other safety precautions. |
| 34 | Providing & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistanceedged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge. |
| 35 | Taking down old fencing including RCC/steel post with mild steel flats & nut bolts of any description complete all as specified and directed. |
| 36 | Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engg-in-charge) all as specified. |
| 37 | Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc,including necessary bolting complete all as specified and directed. |
| 38 | S&F Mild steel round bars 10mm dia and over as in strengthning bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 39 | M&L for preparation of new steel surfaces of any description n.exc 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 40 | M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described for and apply two coat of synthetic enamel paint over one coat of red oxide primer complete complete all as specified and directed. |
| 41 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples at height upto 15.0 mtr complete all as specified and directed. |
| 42 | Hacking out old broken glass (any thickness, size, quality or description) indluding wooden beading from wooden/iron or aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 43 | S&F 3mm thick sheet glass ordinary quality for wooden/steel window and glazing with oil putty in squares or fixed with beads area in each pane area n.exc 0.50 sqm etc complete all as specified and as directed. |
| 44 | M&L for PVC wall profile for wall panelling colour/shade as approved size250mm wide, 08mm over all thick with 1mm wall thickness fixed with screw fixed to walls with necessary frame , complete all as specified and as directed by EIC. Note:-incl Taking down of existing switch board/tube light etc and fixing the same |
| 45 | M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching wall panelling complete,all as specified and as directed by EIC. |
| 46 | M&L for solid PVC wall lining consisting of 5.00mm thick single side prelaminated PVC sheet inclusive of insolvent cement and fixing at site on PVC frame complete all as specified and as directed . Note:-incl Taking down of existing switch board/tube light etc and fixing the same. |
| 47 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed |
| 48 | S&F in repair aluminium (Die cast) body, door closer hydraulically regulated designation No-1, universal type, suitable for door shutters of weight not more than 35 kg complete all as specified and directed. |
| 49 | S&F Powder coated aluminium anodised frame for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron) Please Enable Macros to View BoQ information 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 50 | S&F Powder coated aluminium anodised frame for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron) Please Enable Macros to View BoQ information 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 51 | Brick bats |
| 52 | Old unserviceable False ceiling/Wall penalling etc |
| 53 | Old unserviceable tiles of any description |
| 54 | Old unserviceable venetian blind of any Type and description |
| 55 | Old unserviceablesteel /galvalume sheeting incl hooks ridge of any type and description |
| 56 | Old unserviceable chain link fence of any type and description |
| 57 | Old unserviceable aluminium window/ventilator frame incl shutter of any section incl accessories complete |
| 58 | Old unserviceable aluminium door frame incl shutter of any section incl accessories complete |
| 59 | Old unserviceable shutters n.exc. 1.5sqm incl chowkats of any type and description |
| 60 | Old unserviceable wire mesh |
| 61 | Old iron scrap |
| 62 | Old unserviceable hydraulic door closure Total amount of credit schedule 59225.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER |
