Tender For Installation Of New Dt For Different Places, Under The Head Of Business Plan 2026-27, Under The Geographical Area Of Edd, Tulsipur.All The Following Work Will Be Execute According To Sanctioned Estimate/ Package As Per Resspo U.P.P.C.L. Dr, Tulsipur-Uttar Pradesh
TDR : 55702565
Tender Notice
BOQ
2 Days Left
Tulsipur
Uttar Pradesh
Tender For Installation Of New Dt For Different Places, Under The Head Of Business Plan 2026-27, Under The Geographical Area Of Edd, Tulsipur.All The Following Work Will Be Execute According To Sanctioned Estimate/ Package As Per Resspo U.P.P.C.L. Dr
Name of Work:- Installation of New DT for different places, under the Head of Business Plan 2026-27, under the geographical area of EDD, Tulsipur.All the following work will be execute according to sanctioned Estimate/ Package as per RESSPO U.P.P.C.L. drawing/norms.
Sl. No.
Item Description
1
Loading, Unloading and safe cartage of the following materials from Electricity Store Centre, Balrampur to the work site/dump site (Distance up to 50 km)
2
PCC Poles (8.5 mtr long)
3
100 KVA T/F
4
11 KV XLPE cable 3x70sq.mm.
5
11 KV Jointing Kit Outdoor (3x70sq.mm.)
6
Other line materials
7
Erection of sectional double pole sectional PCC pole (8.5 mtr long PCC Pole) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site.
8
Earthing of pole as per UPPCL/RESSPO Norms..
9
Erection and Grouting of stay sets alongwith complete fittings. Cement, Sand & Brick ballast provided by the contractor at his own cost.
10
Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely.All required materials provided by the contractor at his own cost.
11
Laying and fitting of 11 KV XLPE cable 3x70sq.mm.
12
Erection & fitting of 11 KV Jointing Kit Outdoor (3x70sq.mm.)
13
Construction of 250/400 KVA T/F plinth 2x2x1.5 Mtr. for mounting T/F including foundation work (below ground 0.5 M), Brick work, RCC slab of 4\\" thickness and plastering in 1:6 ratio with 02 Nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect as per UPPCL Norms.
14
Cage fencing of 250 KVA Plinth mounted transformer in Town areas to avoid electrical human/cattle accidents by fabrication of cage (1 Inch Sq wire mesh) made of 10 No gauge in suitable size angle iron frame of size 7.5'(L)x5'(W)x8'(H) by strengthening of wire mesh 20x3 mm M.S. flat horizontally as well as vertically, Grouting the panel with 1:2:4 cement/coorse send/brick ballast. The Frame should be bolted on angles at the four corners so that frame may be un-bolted/bolted at the time of replacement of the transformer. Provision of 1 gate should be there for maintenance of the transformer. Painting (1 coat of red oxide + 2 coat of Bus green enamel paint. The wire mesh should be earthed with 50x6 MS earthing strip with existing earthing of Transformer Body. All manpower, material and T&P provided by the contractor to complete the fabrication. transportation and installation.
15
Decentralized materials:-Providing and fixing of following materials as per sanctioned Estimate/Package as per RESSPO U.P.P.C.L. drawing/ norms.(where is required).
16
11 KV Fuse Set
17
Clamp for Top channel
18
Stone Pad 300x30075mm.
19
Clamp for LT T-off with bolts & nuts.
20
Holding clamps for Top channel TPMO & Fuse set etc.
21
11 KV TPMO
22
Danger board Barbed wire including jumper. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
