Tender For Item Supply For Chain Link Fencing, Reinforced Cement Concrete Pole And Barbed Wire, In The Year 2026-27 In Madhya Pradesh. The Plantation Areas To Be Done Under State Forest Development Corporation Chhindwara Project Division And V.C.L. M, Chhindwara-Madhya Pradesh
TDR : 55700290
Tender Notice
BOQ
21 Days Left
Chhindwara
Madhya Pradesh
Tender For Item Supply For Chain Link Fencing, Reinforced Cement Concrete Pole And Barbed Wire, In The Year 2026-27 In Madhya Pradesh. The Plantation Areas To Be Done Under State Forest Development Corporation Chhindwara Project Division And V.C.L. M
Name of Work:- ITEM SUPPLY FOR CHAIN LINK FENCING, RCC POLE and BARBED WIRE
Sl. No.
Item Description
1
वर्ष 2026-27 में म.प्र. राज्य वन विकास निगम छिन्दवाड़ा परियोजना मण्डल अंतर्गत किये जाने वाले रोपण क्षेत्रों एवं वे.को.लि. म.प्र. एवं महाराष्ट्र में किये जाने वाले रोपण क्षेत्रों में चेनलिंक फेन्सिंग सामग्री क्रय हेतु
2
GALVANIZED STEEL CHAIN LINK FENCEMesh Line Wire – Galvanized steel wire of 3.15 mm diameterFabric Size – 100x100 mmHeight – 150 cmLine Wire – 2 Numbers of Line wire of 4.00 mm diameterStandard- Conforming to IS-2721-2003, withup to date amendments.
3
RCC FENCING POLES HIGHT 2.0 MType – StraightLenght – 2.00 mDimensions – Bottom 10x10 cm square, Top 8x8 cm squareCement Concretc Mix – Cement, sand and metal ratio 1:2:4, with 12.5 nominal size coarse aggreate. Sand used should be free from clay and salt, concrete mix shall be conforming to grade M-15 of IS: 456:2000Reinforcement – 4 round vertical bars of 6 mm diameter. 11 No of stirrups of 6mm diameter round MS bare 20 cm centre to center.Hooks- 5 no. bottom hook should be provided 60 cm above the bottom of the pole. second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.Manufacturing- In order to ensure desiredcompressive strength, RCC fencing poles should be compacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm
4
Galvanised Steel Barbed WireLine Wire- Galvanised steel wire of 2.5 mmdiameterPoint Wire- Galvanised steel wire of 2.5 mmdiameterBarbs – Distance between two barbs 75 mm, thebarbs shall have four points and shall be formedby twisting two point wires each two turns.tightly around both the line wires makingaltogether four complete turns.Standard – Conforming to IS-278-2009 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
