|
| 1 | Dismantling/Demolishing - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 2 | For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : |
| 4 | Bituminous road |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (Cum measure in weight-Bridge) |
| 6 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 7 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 8 | Sanitary Installations - Providing and fixing C.P. brass Pillar Cock with Extended Lever Handle bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Code FLR-CHR-5031N From Jaquar. |
| 9 | 15mm nominal bore |
| 10 | SOIL WASTE AND VENT PIPES - Providing and fixing unplasticized Rigid PVC SWR single socketed pipes conforming to IS 13592 Type B (pressure of 6 kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion and jointing with approved solvent wherever required as per the direction of the Engineer-in-charge for soil, waste and vent pipes including necessary fittings and accessories complete.(Note : 1. All the joints shall be leak proof. 2. The centre line length of pipes shall be measured for the purpose of payment. 3. Floor trap and terminal guard only shall be measured separately for payment). (Make :- Supreme and Equilvent) |
| 11 | 110mm dia. |
| 12 | 75mm dia |
| 13 | Providing and fixing unplasticized Rigid PVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet (Make :- Supreme and Equilvent) |
| 14 | Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. |
| 15 | Total bracket length 1040 mm of approved shape and design (for three 100/150 mm dia pipes) |
| 16 | External/Internal water supply - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with fittings and the base support for tank. (Make : Sintex) |
| 17 | Treated water Tank |
| 18 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : |
| 19 | 80 mm dia nominal bore (25 to 80 mm) |
| 20 | Providing and fixing Indian make CP brass air valves with gunmetal isolation valve fixed on pipe lines.(Make :- Zoloto) |
| 21 | 20mm n.b air vent with 20mm isolation valve. |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(External Work) (Make:- Zoloto) |
| 23 | 50 mm dia nominal bore |
| 24 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including including excavation, excavation, refilling refilling the earth or cutting cutting of wall and making good the same complete wherever required: (Make :- Zoloto) |
| 25 | 50 mm nominal bore |
| 26 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 27 | 50 mm dia nominal bore |
| 28 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in External work : |
| 29 | 50 mm diameter pipe |
| 30 | Making connection of G.I./CPVC distribution branch with G.I./D.I main of following sizes by providing and fixing tee, including, cutting and threading the pipe etc. commplete including obtaining approval for connection from Municipal corporation , if required |
| 31 | 25 to 150 mm nominal bore |
| 32 | Supply, installation, testing & commissioning of ball valves complete with bronze forged body, chrome plated bronze ball and control lever etc. (Make :- Zoloto) |
| 33 | 50mm nominal bore |
| 34 | Providing and fixing CI Butterfly valve with C.I. wheel of approved quality (screwed end) (Make :- Zoloto) |
| 35 | 50mm nominal bore |
| 36 | Supply, installation, Testing & Commissioning of PN10 rated Solenoid valves including High / Low switches, and all necessary electric wiring, cabling , control panel including bypass arrange valve. |
| 37 | 50mm nominal bore |
| 38 | Supply installation, testing & commissioning of cast iron (CI) Butterfly Valves of PN 16 rating (Make :- Zoloto) |
| 39 | 50mm nominal bore |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.(Make :- Supreme and Equilvent) |
| 41 | 50 mm nominal outer dia Pipes (SDR-11) |
| 42 | 40 mm nominal outer dia Pipes (SDR-11) |
| 43 | 32 mm nominal outer dia Pipes (SDR-11) |
| 44 | 25 mm nominal outer dia Pipes (SDR-11) |
| 45 | 20 mm nominal outer dia Pipes (SDR-11) |
| 46 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
| 47 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 48 | Cutting chases in brick masonary walls for following diameter sand cast iron/centrifugally cast (spun)/ iron pipes and making good the same with cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement: 4coarse sand): |
| 49 | 100 mm diameter pipe |
| 50 | Drainage - Providing and fixing SS floor trap grating 143x143x5 mm thick screwable with SS fixed framed of 150x150 mm size as per approved make and model |
| 51 | Flooring - Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.(Make/Code:- Kajaria/k6212/k10105) |
| 52 | Double charge vitrified tile polished finish of size - Size of Tile 600 x 600 mm |
| 53 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (Make : ArmStrong,Gyproc) |
| 54 | 12.5 mm thick tapered edge gypsum moisture resistant board |
| 55 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 56 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 57 | Finishing - Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 58 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 59 | Two coats |
| 60 | Electrical Works - Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: Legrand) |
| 61 | 4 way (8 + 12), Double door |
| 62 | supplying and fixing single pole blanking plate in the existing MCB DB complete etc . As required. |
| 63 | Supplying and fixing following, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make: Legrand DX) |
| 64 | 63A Four pole |
| 65 | 32A Double Pole |
| 66 | Supply and fixing of following rating, four pole (three phase and neutral), 415 Volts, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make: Legrand) |
| 67 | Supplying and fixing 5A to 32A, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make: Legrand DX) |
| 68 | Single Pole |
| 69 | Supply, loading, transportation, unloading at site, storage at site, shifting from storage place to site of following sizes of 1.1kV grade XLPE insulated, extruded PVC inner sheathed and overall FR-LSH PVC outer sheathed, Aluminum conductor, armored cables as per IS:7098 part-I or amended upto date and as per specifications (Make: KEI/Universal/Havells/Gloster) |
| 70 | 4C X 25 sq. mm |
| 71 | Supplying and making end Termination with brass compression gland (double compressor) and aluminum lugs for following size of PVC insulated and PVC sheathed (Make: Dowells) |
| 72 | 4C X 25 sq. mm |
| 73 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1kV grade of following size on cable tray as required (Make: OBO/ Legrand/ Cooper/ BEC) |
| 74 | Upto 35 sq.mm. (clamped with 1mm thick saddle) |
| 75 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required (Make: Havells/KEI/Finolex/RR Kabel) |
| 76 | 3x4 sq.mm. |
| 77 | 3x6 sq.mm. |
| 78 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Legrand Arteor) |
| 79 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required (Make: Precision/AKG/BEC/Sudhakar) |
| 80 | 25 mm |
| 81 | 40 mm |
| 82 | wiring for circuit\submain wiring alongwith earth wire with the folloing sizes of FRLS PVC insulated copper conductor ,single core cable in surface\recessed steel conduit as required. (Make: Havells/KEI/Finolex/RR Kabel) |
| 83 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 84 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 6 pin 5/6 A & 15/16 A modular socket outlet and 1 No. 20 A modular switch, connections etc. as required. (Make: Legrand Arteor) |
| 85 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (Make: Legrand/Hager/Siemens/Schneider) |
| 86 | Supplying and fixing 5A to 32A, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make: Legrand DX 3) |
| 87 | Single Pole |
| 88 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 6 pin 5/6 A & 15/16 A modular socket outlet and 1 No. 20 A modular switch, connections etc. as required. (Make: Legrand Arteor) |
| 89 | Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required (Make: Precision/AKG/BEC/Sudhakar) |
| 90 | 20 mm |
| 91 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1kV grade of following size on cable tray as required (Make: OBO/ Legrand/ Cooper/ BEC) |
| 92 | Upto 35 sq.mm. (clamped with 1mm thick saddle) |
| 93 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required (Make: Havells/KEI/Finolex/RR Kabel) |
| 94 | 3x2.5 sq.mm. Please Enable Macros to View BoQ information |
