|
| 1 | Providing and running of 8 Nos tractor PTO(Power take off) driven positive displacement rotary lobe pump of 35 Hp of capacity 200-210 cum/hr,100/150 mm dia suction/delivery PVC flexible/canvas pipe having length upto 1000 Mtrs, tractor of adequate HP, idling speed 540 rpm scable to 600 RPM for pumping/bailing out drainage/rainy/storm/water sump drain/emergency dewatering of stagnated water of road surface etc. including all incidental charges as and when required on hire basis including carriage of pump, diesel, positioning of pump, engaging driver/Operator and Khallasi round the clock for smooth running of Pump at site as per term & condition and inventory attached etc. complete as required. ( For water bodies) (i) Idle Period( 8Nos X 90 Days) Note:- 1.This includes receiving all phone calls regarding water logging in the area under jurisdiction. 2. This item also includes the cost of services of operating staffs,cost of lubricanting oil,diesel and other consumables item for running the pump sets complete as required as per direction of Engineer in -charge. |
| 2 | (ii) Running period (720 x 2 hrs approx= 1400 hrs) |
| 3 | Providing of staff as details below for operation and maintenance of diesel engine driven mobile pump set of capacity 1 Cusec to 6 Cusec during the rainy season round the clock with in the Union Territory of Delhia) Pump operator Gr-II (1Nos. in each shift at Vikas Minar Flood Control Centre)----3 Nos. Per day |
| 4 | b) Pump operator Gr-II (1Nos. in each shift at DDA Workshop Mayapuri Flood Control Centre)----3 Nos. Per day |
| 5 | c) Pump operator Gr-II (1Nos. in each shift at Flood Control Centre Manglapuri Dwarka)----3 Nos. Per day |
| 6 | d) Pump operator Gr-II (1Nos. in each shift at Aditi Apartment under jurisdiction of Vikas Minar Flood Control Centre)----3 Nos. Per day |
| 7 | g) Mechanic Gr-I(1Nos. in each shift)----3 Nos. Per day |
| 8 | Hiring of Tata 407/709 metador or equivalent tempo/towing crane/pickup with driver for 24 hrs for transportation of diesel driven mobile pump set and available labour for loading & unloading of mobile pump sets etc. as various sites for attending complaints as per terms & conditions attached for 3 Nos. Tempo per day:- a) Idling |
| 9 | b)Running |
| 10 | Procurement and supply of HSD Diesel in good condition for operation of diesel engine driven mobile pump set of capacity 1 Cusec to 6 Cusec during the rainy season in the Union Territory of Delhi. |
| 11 | Servicing of Diesel Engine of following capacity of Mobile Pump Set i/c supply & Replacement of Engine Oil, filters, leakage and minor repairing testing of pump set on lead etc. complete as required.1 Cusec :- (i) S/R Diesel and oil filter 1 set(ii) S/R Calibration of injector & Pump 1 set(iii) S/R Engine Oil 5 Ltrs(iv) S/R Fuel Pipe 2 Nos.(v) S/R Air filter 1 set(vi) S/R Belt 2 Nos.(vii) S/R Gasket Kit 1 set(viii) S/R labour charge for complete Servicing,Testing of diesel engine P/set - 1 Job |
| 12 | 2 Cusec:- i)S/R Diesel and oil filter 1 setii)Calibration of injector & Pump 2 setiii)S/R Engine Oil 8 Ltrsiv)S/R Fuel Pipe 2 Nos.v)Air filter 1 setvi)Belt 2 Nos.vii)Gaskit Kit 2 setviii)Labour charge for complete Servicing,Testing of diesel engine P/set - 1 Job |
| 13 | 3 Cusec:- i)Diesel and oil filter 1 setii)Fuel Pump & Nozzle Calibration 1 setiii)Engine Oil 12 Ltrsiv)Fuel Pipe 2 Nos.v)Air filter 1 setvi)Belt 2 Nos.vii)Labour charge for complete Servicing,Testing of diesel engine P/set - 1 Job |
| 14 | 4 Cusec:- i)Diesel and oil filter 1 setii)Fuel Pump & Nozzle Calibration 1 setiii)Engine Oil 15 Ltrsiv)Fuel Pipe 2 Nos.v)Air filter 1 setvi)Belt 2 Nos.vii)Labour charge for complete Servicing,Testing of diesel engine P/set - 1Job |
| 15 | 6 Cusec:- i)Diesel and oil filter 1 setii)Fuel Pump & Nozzle Calibration 1 setiii)Engine Oil 20 Ltrsiv)Fuel Pipe 2 Nos.v)Air filter 1 setvi)Belt 2 Nos.vii)Labour charge for complete Servicing,Testing of diesel engine P/set - 1Job |
| 16 | Repairing /Overhauling of 1 Cusec diesel engine P/set complete with supplying & replacement of the following worn out parts etc as reqd.i)Diesel and oil filter 1 setii)Calibration of injector & Pump 1 setiii)Engine Oil 5 Ltrsiv)Fuel Pipe 1 Nos.v)Liner, Piston set with ring 1 setvi)Head Gasket set 1 setvii)Rubber Kit 1 setviii)C.R Bearing 1 setix)Main Bearing 1 setx)Oil Pump 1 Nos.xi)Oil Seal 1 setxii)Tyre Coupling 1 Nosxiii)Gasket Kit 1 setxiv)Labour charge for complete Servicing,Testing of diesel engine P/set 1 Job |
| 17 | Repairing /Overhaulingof 2 Cusec diesel engine P/set complete with supplying & replacement of the following worn out parts etc as reqd. i)Diesel and oil filter 1 setii)Calibration of injector & Pump 2 setiii)Engine Oil 8 Ltrsiv)Fuel Pipe 2 Nos.v)Liner, Piston set with ring 2 setvi)Head Gasket set 2 setvii)Rubber Kit 1 setviii)C.R Bearing 2 setix)Main Bearing 2 setx)Oil Pump 1 Nos.xi)Oil Seal 1 setxii)Tyre Coupling 1 Nosxiii)Gasket Kit 1 setxiv)Labour charge for complete Servicing,Testing of diesel engine P/set 1 Job |
| 18 | Repairing / Overhauling of 3 Cusec diesel engine P/set complete with supplying & replacement of the following worn out parts etc as reqd. i)Diesel and oil filter 1 setii)Calibration of injector & Pump 1 setiii)Engine Oil 12Ltrsiv)Fuel Pipe 1 Nos.v)Liner, Piston set with ring 3 setvi)Head Gasket set 1 setvii)Rubber Kit 1 setviii)C.R Bearing 3 setix)Main Bearing 3 setx)Oil Pump 1 Nos.xi)Oil Seal 1 set xii)Gasket Kit 1 setXiii) Labour charge for complete Servicing,Testing of diesel engine P/set 1 Job |
| 19 | Repairing and over hauling of pump coupled with diesel engine i/c supply & replacement of following worn out parts as reqd.1 Cuseci)Impeller 1 No.ii)Bearing 2 Nos.iii)Grinding, turning and remetaling of shaft with key 1 Jobiv)Gland Plate with stud. 1 No |
| 20 | Repairing and over hauling of pump coupled with diesel engine i/c supply & replacement of following worn out parts as reqd.2 Cuseci) Impeller 1 No.ii) Bearing 2 Nos.iii) Grinding, turning and remetaling of shaft with key 1 Jobiv) Gland Plate with stud. 1 No |
| 21 | Repairing and over hauling of pump coupled with diesel engine i/c supply & replacement of following worn out parts as reqd.3 Cuseci)Impeller 1 No.ii)Bearing 2 Nos.iii)Grinding, turning and remetaling of shaft with key 1 Jobiv)Gland Plate with stud. 1 No |
| 22 | Servicing of Diesel Engine of following capacity of Mobile Pump Set i/c supply & Replacement of Engine Oil, filters, leakage and minor repairing testing of pump set on lead etc. complete as required. 6Hp :- (i) S/R Diesel and oil filter 1 set(ii) S/R Calibration of injector & Pump 1 set(iii) S/R Engine Oil 4 Ltrs(iv) S/R Fuel Pipe 2 Nos.(v) S/R Air filter 1 set(vi) S/R Belt 2 Nos.(vii) S/R Gasket Kit 1 set(viii) S/R labour charge for complete Servicing,Testing of diesel engine P/set - 1 Job |
| 23 | Servicing of Diesel Engine of following capacity of Mobile Pump Set i/c supply & Replacement of Engine Oil, filters, leakage and minor repairing testing of pump set on lead etc. complete as required. 8Hp :- (i) S/R Diesel and oil filter 1 set(ii) S/R Calibration of injector & Pump 1 set(iii) S/R Engine Oil 4 Ltrs(iv) S/R Fuel Pipe 2 Nos.(v) S/R Air filter 1 set(vi) S/R Belt 2 Nos.(vii) S/R Gasket Kit 1 set(viii) S/R labour charge for complete Servicing,Testing of diesel engine P/set - 1 Job |
| 24 | Servicing of Diesel Engine of following capacity of Mobile Pump Set i/c supply & Replacement of Engine Oil, filters, leakage and minor repairing testing of pump set on lead etc. complete as required. 12Hp :- (i) S/R Diesel and oil filter 1 set(ii) S/R Calibration of injector & Pump 1 set(iii) S/R Engine Oil 5 Ltrs(iv) S/R Fuel Pipe 2 Nos.(v) S/R Air filter 1 set(vi) S/R Belt 2 Nos.(vii) S/R Gasket Kit 1 set(viii) S/R labour charge for complete Servicing,Testing of diesel engine P/set - 1 Job |
| 25 | Repairing /Overhauling of 12Hp diesel engine P/set complete with supplying & replacement of the following worn out parts etc as reqd.i)Diesel and oil filter 1 setii)Calibration of injector & Pump 1 setiii)Engine Oil 5 Ltrsiv)Fuel Pipe 1 Nos.v)Liner, Piston set with ring 1 setvi)Head Gasket set 1 setvii)Rubber Kit 1 setviii)C.R Bearing 1 setix)Main Bearing 1 setx)Oil Pump 1 Nos.xi)Oil Seal 1 setxii)Tyre Coupling 1 Nosxiii)Gasket Kit 1 setxiv)Labour charge for complete Servicing,Testing of diesel engine P/set 1 Job |
| 26 | SITC of centrifugal self priming engine Monoset pump having power 2.9 KW/ 3600 rpm ,pump size 80 mmx80mm and discharge minimum 670 ltrs/Min at head 14 mtrs etc. complete as required at DDA workshop Mayapuri. Engine Type:- Diesel/Petrol. |
| 27 | Supply of following double wall corrugated high density polyphone pipe for diesel driven pump set discharge/suction with socket/union complete as required . (a) 80 mm Diameter |
| 28 | (b) 100 mm Diameter |
| 29 | (c) 150 mm Diameter |
| 30 | Supplying of following size PVC Flat Hose pipe complete with couplers, MS Hose clamps etc. complete as required as per direction Engineer-incharge.(i) 150 mm dia. |
| 31 | Supply and fixing of following items/accessories required to discharge the storm water from diesel engine driven mobile pump set complete as requireda) 80 mm PVC foot valve with Clamp |
| 32 | b) Nipple with clamp 100 mm Dia |
| 33 | d) Diesel Engine Handle suitable for kirloskar make 6/8/12 Hp diesel engine |
| 34 | e) Coupling i/c nut , bolt suitable for kirloskar make pump coupled with 6/8/12 Hp diesel engine |
| 35 | f) Air Filter with gasket nut/bolt suitable for kirloskar make 6/8/12 Hp diesel engine |
| 36 | g) Rubber Wheels suitable for kirloskar make 6/8/12 Hp diesel engine --1 set(i.e., 4 Nos) |
| 37 | h)NRV with fitment suitable for kirloskar make 6/8/12 Hp diesel engine pumps |
| 38 | i)Silencer with gasket i/c nut , bolt suitable for kirloskar make 6/8/12 Hp diesel engine |
| 39 | j) 100mm PVC foot valve with Clamp |
| 40 | k) 150 mmPVC foot valve with Clamp |
| 41 | Supplying, installation, testing & commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L, N, E as per IEC 61000-4-5, Driver efficiency >85%, THD <10% as per IEC 61000-3-2, P.F.> 0.95, IP-66, IK-10, CRI >80, under voltage and over voltage protection, EMI-EMC As per CISPR-15, lenses for beam angle as per IESNA type l/ll/lll as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) if minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IEM TM-21-11 report, CCT 3000.O K/4000OK/5700OK/6000OK/6500OK (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and fixture shall be relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >120<135 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90OC).(i) 9o Watt |
| 42 | Supply and drawing of following sizes of PVC insulated & FRLS three core round sheathed bright annealed bare copper conductor heavy duty cable for voltage upto 220-240 V s i/c connection and testing etc complete as required. a) 3x4 Sq.mm Cable |
| 43 | Supply and replacement of 150 AH lead acid battery duly charged complete with copper wires, terminals & thimbles etc as required. |
| 44 | Supply, testing and commissionning of 2Hp sewage/waste water dewatering pump suitable for single phase 50 Hz, 220/240V AC supply having inlet/outlet dia 50 mm along with test certificate i/c thimbling, connections, testing etc complete as reqd. Please Enable Macros to View BoQ information |