|
| 1 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with as per Technical Specificatio |
| 2 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side |
| 3 | Granular sub-base/base/surface course by providing well graded material , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with smooth wheeld roller to achieve the desire |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes 45mm to 63mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes 53 mm to 22.4 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to p |
| 6 | Providing and applying primer coat with bitumen emulsion (SS -1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg per sqm using mechanical means AS PER Technical Specification Clause 502 but |
| 7 | Providing and applying Tack coat with bitumen VG-10 using bitumen pressure distributor @ 0.20 to 0.25 kg. per Sqm. On the prepaired dry and hungry bituminous surface cleaned with Hydaulic broom as per Technical Specification Clause 503. |
| 8 | Providing,laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previouslyprepared base i/c mixi |
| 9 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Case III Type C (VG-10) |
| 10 | Brick on edge lining on both side of road with M-150 bricks laid with mud mortar including cost of all material labour and T&P etc required for proper completion of the work (PWD SOR Rampur S.I. No. 765). |
| 11 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (Ordinary Kilometer Stone (Precast)) |
| 12 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (ii) 200 m stone (precast) |
| 13 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform a |
| 14 | Concrete with 4cm gauge brick ballast, fine sand and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour, T&P etc. required for proper completion of Work . (Rampur SOR Ch-5 S.No.- 273) |
| 15 | Brick masonry work in 1:4 ement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 |
| 16 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 |
| 17 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (P.C.C grade M 20) |
| 18 | Construction of information piller in brick work with Black Granite stone(2x3) size with B/W in 1:4 in 1.20m.wide wall,23 to 35 cm thickness & 1.35m. Height above G.L. with plaster in 1:4 as per drawing attached I/C digging & painting of letters ,snowcem Please Enable Macros to View BoQ information |
