|
| 1 | Dismantling of post or struts (wood or steel or RCC) any section incl taking embeded portion and making good disturbed ground embeded in concrete complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm,soft/lose soil watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 3 | Material & labour PCC 1:4:8 Type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing RCC/ any fencing posts complete all as specified and as directed |
| 4 | Supply & fixing MS angle iron posts and struts, flat & round bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, bolting etc and similar works like MS flat iron fillets confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 5 | Preparation of new steel surfaces any width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 6 | Material & labour providing RCC Type B1 1:2:4 (20 mm mm graded stone aggregate) as in pre cast fencing post struts etc complete all as specified and as directed |
| 7 | Dismantling fencing barbered wire complete all as specified and as directed |
| 8 | Supply & fixed in repair Galvanized 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing straining, tightening and fixing to MS nibs embeded in pre cast RCC/AI fencing post struds etc securing and typing as crossing with and provision of galvanized mild steel wire complete all as specified and as directed |
| 9 | Fixing only and Restraining resecuring of old barbed wire in fencing including making good staples etc complete all as specified and as directed by Engr in Charge. |
| 10 | Supply & fixing mild steel screw bolt 05 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one washer and hexagonal nut length upto 10cm complete all as specified and as directed. |
| 11 | Dismantling fencing wiremesh any type. |
| 12 | Supply & fixing chain link fencing 4mm dia galvanised steel wire 100 x 100 mesh made up into mattress or kgs lapped wired and laid in position including closing after filling fixed in repairs complete all specified and as directed. |
| 13 | S&F MS round bars of 10mm dia cut to length as in horizontal for chain link fencing including necessary hooking at ends complete all as specified and directed. |
| 14 | Demolition of brick work including all quoins arches pillars etc built in cement mortar complete all as specified and as directed. |
| 15 | Material & labour brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 16 | Material & labour brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 except bricks complete all as specified and as directed. |
| 17 | Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed. |
| 18 | Material & labour for Rendering 15mm thick in cement mortar 1:4 on EXTERNAL fair faces or Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement as per manufactare instruction complete all as specified and directed. |
| 19 | Supply only Water proofing compound complete all as spcifed and as directed. |
| 20 | Material & labour Providing cement concrete with type B0 1:2:4 using 12.5mm graded aggregate as in coping and the like including for use of form work (straight or curved) weathering slightly rounded or chamferred angles and throating as directed. |
| 21 | Material & labour for preparation of Plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & labour for dark coloured Glazed ceramic printed/digital tiles of size 450 x 300 x 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.12 sqm but not exceeding 0.18 sqm, on vertical surface over and including 10 mm thick rendering in cement mortar 1:4 thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and as directed. |
| 23 | Demolition of cement concrete (unreinforced) of of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed. |
| 24 | Material & labour for PCC with type D-2 1:4:8 (40 mm graded aggregate ) 75mm thick as in sub base. complete all as specified and directed. |
| 25 | Material & labour for PCC with type B-0. 1:2:4 (12.50mm graded aggregate) 40 mm thick as in flooring and finishing the floor even and smooth without using extra cement complete all as specified and directed. |
| 26 | Providing and layiong 60 mm thick factory made chamfered edge cement concrete paver block og M-35 grade with approved colour , design & pattern as in footpath , parks , lawns , drive ways or light traffic parking etc ,of required strength , thickness & size/shape , made by table vibratory method using PU mould , laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as per required size and pattern , finishing and sweeping extra sand complete all as specified and as directed. |
| 27 | Material & labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set with grey cement and pigment , jointed and pointed in neat cement slurry in floors incl 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 28 | Providing and laying at or near ground level factory made kerb stones M-25 grade cement concrete in position to the required line , level and curvature ,jointed with cement mortar 1:3 (1 cement :3 coarse sand ), including making joints with or without grooves (thickness of joint except st sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 29 | Material & labour for brick work with sub class 'B' brick old size straight & curved on plan to any radius in half brick thick wall built in CM 1:4 with pointing complete all as specified and directed. |
| 30 | Material & labour for Racking out joints and flush pointing to brick work in walls or to brick on edge in floors, surface channels, in drains, etc work built in cement mortar 1:4, complete all as specified and directed. |
| 31 | Material & labour Reinforced concrete 450mm bore pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed. |
| 32 | Material & labour for concrete bed to drain pipes including packing under and haunching against the sides of the pipeCement concrete 1:3:6 type C-2 for bed to drain pipes of 450mm dia including packing under, and completely surrounding pipes with concrete after they are laid and tested; in |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 34 | Supply and fix steel work in tubular trusses in purlins rafters etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St- 240 complete all as specified and as directed |
| 35 | Supply and fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed Please Enable Macros to View BoQ information |
