|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface. |
| 2 | M&L for cement concrete in foundations,filling and mass concrete type C2 1:3:6(40 mm graded aggregate) as in post hole and all as specified and directed. |
| 3 | S & F posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc,flat iron fillets (for securing wire mesh etc) including all necessary drilling,bolting or riveting,etc and similar work conforming to Fe-290 Gde E-165 cleats (50*50*6mm)etc complete all as specified and as directed by Engr in charge. |
| 4 | S&F Flat iron fillets for securing wire mesh etc including all necessary drilling,bolting or riveting etc and similar work confirming to Fe290 Gde E-165 (40*5mm) all as specified and directed. |
| 5 | M&L Preparation of new steel surfaces of any description over 10 cm width or grth and width or girth and applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed. |
| 6 | Supply and fixing of Fibre glass reinforced 1.5 mm thick translucent plain sheeting fixed with coach screw and washer in roof, wall etc complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately. |
| 9 | Supply only integral water proofing compound complete all as specified & as directed by Engineer-in-Charge. |
| 10 | M&L for cement plastering 10 mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for cement plastering 10mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 13 | Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 14 | Material & labour for Preparation of plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge. |
| 15 | Applying 02 coats of exterior emulsion weather proof paint (light shade) to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc surfaces over & including a coat of exterior wall primer complete all as specified and directed. |
| 16 | M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed |
| 17 | Applying 02 coats of interior oil bound distemper (light shade) to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD and primer complete all as specified and directed. |
| 18 | Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 20 | Material & labour for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 21 | Material & labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 22 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 23 | Material & labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified. |
| 24 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises. |
| 25 | Material & labour for Virified Ceramic tiles(light shade) 10 mm thick (square/ rectangular) polished, size of each 600mm X 600mm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match, joined in cement slurry over and incl 15mm thick cement mortar (1:4) screed bed and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-charge. |
| 26 | Material & labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and incl 15 mm thick cement mortar (1:4) screed bed and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L coloured glazed ceramic tiles size 450x350x7mm thick laid over 10mm thick rendering coat in CM 1:3, set and jointed in neat cement and pointed in white or coloured cement to match. The dado of same finish as of flooring shall be flush with plaster & all edges properly mitered. |
| 28 | Supply & fixing vitreous china premium/1st quality wash basin white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. |
| 29 | Supply & fixing vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 30 | Supply & fixing flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. |
| 31 | Supply & fixing Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. |
| 32 | Supply & fixing 15 mm dia Stop cock cast copper alloy fancy type CP with long shank and cup (concealed type), screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 33 | Supply & fixing Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 34 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm. complete in all respect all as specified. |
| 35 | Supply & fixing Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs all as specified. |
| 36 | Supply & Fixing acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fiexed to walls with plug and brass chromium plated screws complete all as specified and directed. |
| 37 | Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store. |
| 38 | Taking up or down 20 mm steel tubing and connections, including cleaning for refixing or removal to store. |
| 39 | Supply and fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and celing or laid in floor etc complete all as specified. |
| 40 | Supply and fixing 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and celing or laid in floor etc complete all as specified. |
| 41 | Supply and fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 42 | Supply and fixing doubled layered rotational moulded polyethylene white colour water storage tanks (with closed top/cover) 500 ltrs capacity hoisted and fixed in position all as specified including ball brass valves,high pressure,with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank including taking down complete all as specified and directed. |
| 43 | Material & labour for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection/ floor finish, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints filled with Bituminous mastic asphalt complete all as specified and directed by Engineer-in-Charge. |
| 44 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge |
| 45 | Demolition of mud in roofs, any thickness, including plastering and leeping(whether full thickness removed or only a part thereof) |
| 46 | Material & labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge. |
| 47 | Material & labour for Cutting grooves in brick wall, 50mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge. |
| 48 | Material & labour for PCC 1:3:6, type B-0 using 12.5mm graded stone agg as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:10 complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material & labour for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified, The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only complete all as specified and directed by Engineer-in-Charge. |
| 50 | Material & labour for cement concrete tiles, factory made , 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:4) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge.Note: WPC will be measered and paid separately |
| 51 | Material & labour for PCC 1:2:4, type B-0 using 12.5mm graded stone agg as in roof curve, benching, mud stops, steps, coping and the like items slightly rounded or chamfered on the edges complete all as specified and directed by Engineer-in-Charge. |
| 52 | Demolition of cement concrete (unreinforced) of of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed. |
| 53 | Material & labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate in sub base,complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 55 | Material & labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set with grey cement and pigment , jointed and pointed in neat cement slurry in floors incl 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 56 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 57 | Supply & fixing factory made Mild Steel Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 105x60mm including filling of PCC 1:3:6, using 12.50 mm graded aggregate in chowkhats and PCC 1:2:4 B1 as in hold fasts blocks including necessary form work complete as specified. |
| 58 | Supply & fixing factory made Mild Steel Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 125x60mm including filling of PCC 1:3:6, using 12.50 mm graded aggregate in chowkhats and PCC 1:2:4 B1 as in hold fasts blocks including necessary form work complete as specified. |
| 59 | Supply & fixing factory made flush shutters 30mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 60 | 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass,gauze etc (without sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-I section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed. |
| 61 | Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed. |
| 62 | Material & labour PCC (1:3:6 ) type B1 using 12.50 mm graded aggregate as infilling in PS Chowkhats/Holdfast Block all as specified . |
| 63 | Butt hinges 100 mm size, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. |
| 64 | Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 65 | Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed. |
| 66 | Supply & fixing powder coated aluminium handles 125mm complete all as specified and directed. |
| 67 | Supply & fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire stapples, in steel/wooden frame complete all as specified and directed. |
| 68 | Supply & fixing of 3 mm thick plain glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, fixed in repair complete all as specified and directed. |
| 69 | Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified directed. |
| 70 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colourPVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as perspecification & drawing complete all as specified and directed by Engr-in-Charge. |
| 71 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification |
| 72 | S & F Steel window box type usning ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc including 8nmm sqauare gaurd bars complete all as specified and directed by Engr-in-Charge. |
| 73 | Supply & fixing for 3 mm figured glass sheet ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified. |
| 74 | Supply & fixing for PVC(HDPE) rain water pipes, 110 mm bore,double socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc including taking down existing damaged CI rain water pipe complete all as specified and as directed |
| 75 | Supply & fixing PVC (SWR) white coloured bends of any radius for 110mm bore as in repair complete all as specified. |
| 76 | Supply & fixing PVC (SWR) white coloured single tees of any radius for 110mm bore as in repair complete all as specified. Please Enable Macros to View BoQ information |
