Tender For Supply Of 1 Dual Output Regulated Dc Variable Power Supply-Input Voltage : 230V/50 Hz Ac.Output Voltage : (0-30)V Dc.Output Current : (0-2)A.Dcprotection Circuit : Over Voltage, Over Current And Short Circuit Protection.High Efficiency : Gr, Tiruchirappalli-Tamil Nadu
TDR : 55697037
Tender Notice
BOQ
8 Days Left
Tiruchirappalli
Tamil Nadu
Tender For Supply Of 1 Dual Output Regulated Dc Variable Power Supply-Input Voltage : 230V/50 Hz Ac.Output Voltage : (0-30)V Dc.Output Current : (0-2)A.Dcprotection Circuit : Over Voltage, Over Current And Short Circuit Protection.High Efficiency : Gr
Dual Output Regulated DC Variable Power Supply-Input Voltage : 230V/50 Hz ac.Output Voltage : (0-30)V dc.Output Current : (0-2)A.dcProtection Circuit : Over Voltage, Over Current and short circuit protection.High efficiency : Greater than 85 %.Low ripple and noise less than 50 mv.Digital display
2
Digital IC trainer kit with breadboard:+5V dc, 1 A regulated power supply. ±12V dc /±15V dc, 200 mA regulated power supply.Solderless breadboard with minimum 840 tie- points, power distribution buses.ZIF(Zero Insertion Force)IC sockets to accommodated 8 or 16 pin ICs.Logic input and output LEDs for output monitoring.16 buffered LED outputs.16 debounced switch inputsVariable clock generator: 0.5 Hz to 50 Hz.Single Pulse output : 100 ms(buffered,Positive and negative outputs).One seven-segment display with 4 BCD inputs.Built-in logic switches.Manual clock: Debounced push-button(one pulse per press).
3
DIGITAL STORAGE OSCILLOSCOPE-Bandwidth: 50-100 MHz. Sampling Rate: 1GS/sec.Channels: 2 (Minimum). Power Supply: 100V–240V AC, 50-60 Hz Automatic Measurement: Vpp, Vavg,RMS, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty etc., Horizontal Scale: 5 ns/div – 50 s/div or equivalent Vertical Resolution: 8 bits (2 Channels simultaneously) Vertical Sensitivity: 1 mV/div – 10 V/div (at input) Waveform Math: +, -, x , ÷, invert, FFT etc., Waveform Storage: 16 waveforms or equivalentCommunication Interface: USB Host, USB interface. C 7-inch color display or equivalent Input impedance - 1 MΩ ±2%, // 20 pF Accessories:2 xpassive probes (1X/10X)
4
PCB Prototype Machine :Manual software : Copper CAM & Mach3 Mill.Resolution (X/Y) : 3.125 micrometre.Working Area(X/Y/Z) : 200 x 300 x 120 mm.Minimum width line and space : 0.1 mm (4 mil).Maximum travel speed : 58 mm/sec(2.28”).Drilling range: 0.2 – 3.175 mm(8-125 mil).Maximum drilling cycles : 50 cycles/minMain axle power rating : 300W.Main axle rotating speed : 25000 RPM.Maximum working speed : 3500 mm/min.Feeding height: 120 mm.Working drive : 0.02 – 0.05 mm.Repositioning accuracy : 0.01 – 0.02 mm.Supported formats : Standard Gerber, DXF, Excellon.Capability of processing various materials:FR4, Copper clad, Acrylic, Metal, Aluminium etc.Power supply : 230V ac Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
