Tender For Providing/Supply And Erection Of The Following Decentralised Material By Contractor With All The Accessories To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms), , Holding Clamp With Bolt & Nut , Clamp W, Dhampur-Uttar Pradesh
TDR : 55694266
Tender Notice
BOQ
14 Days Left
Dhampur
Uttar Pradesh
Tender For Providing/Supply And Erection Of The Following Decentralised Material By Contractor With All The Accessories To The Site. Erection Should Be Complete At Site With All Respect.(As Per Resspo Norms), , Holding Clamp With Bolt & Nut , Clamp W
Providing/Supply and erection of the Following Decentralised Material by Contractor with all the Accessories to the site. Erection should be complete at site with all respect.(as per resspo norms),
2
Holding Clamp With Bolt & Nut
3
Clamp With Bolt & Nut
4
Danger Board with clamp
5
Stone Pad
6
Grouting of pole
7
Natural Water Level Earthing
8
Plinth With Fancing For 250 KVA T/F
9
copper L piece 62x225x12
10
AL Lug
11
Earthing Complete
12
Stay Set Complete
13
MS Channal Top
14
MS Channal Dropper
15
MS Angle T/F Base
16
MS T-OFF CHANNEL
17
SUSPENSION CLAMP WITH I HOOK
18
DEAD END CLAMP WITH I HOOK
19
LT PIERCING CONNECTOR 50 SQMM
20
pipe earthing
21
clamp
22
nut & bolt
23
DEAD END CLAMP
24
LT PIERCING CONNECTOR 120/95/70 SQMM
25
ABC HOOK
26
LT XLPE 1x35 sqmm cable
27
Providing, fabrication and fixing of Henley type Tailless units with frame of size 2.5mx60cmx2.5m made of MS angle 50mmx3mm with fixing of 02 Nos. Henley Type tailless units for Double circuit containing 06+06 No. incoming/ outgoing studs of 500 Amp/630 volts, made out of copper and Rod made of brass along with 01 Neutral made of brass & 03 +03 back entry made of brass & having 07 +07 LT porcelain insulator fixed in holding clamp made of M.S strip. Both Tailless unit should be connected with copper bus bar of size 400mmx50mmx 10 mm (As per site requirement & as per drawing).Grouting tailless frame with cement and concrete on the Plinth of 160 kva T/F & above with making the connection at T/F and Line side with suitable size Aluminum crimping lugs 400 sqmm for completing the work All material shall be provided by the contractor. Only Cable/Lead for connection will be provided by the Department (With cartage and laying of LT XLPE/PVC cable from ESC Bijnor/Dhampur with loading and unloading to the site by the contractor) (work and items should be as per the respo norms). Earthing of M.S. angle frame structure and Tailless Unit with M.S. earthing rod complete in all respect (earthing rod and grouting of earthing will be provided by contractor). Providing & Fixing of Tin-copper fuses strip/wire of different SWG size suitable for tailless unit in all Phases in all respect.Note:- (Above wiil be assumed as one Unit)
28
Safe carriage and Proper Erection/ Installation/Fabrication/laying/fixing/binding etc. of the Following centralised Material With All the Accessories from ESC Bijnor/Dhampur to the site. Erection should be complete at site with all respect.(as per resspo norms)
29
PCC Pole 8.5 mtr Long
30
11 KV Disc insulator with fitting
31
11 KV Pin insulator with Pin
32
11 KV Fuse Set
33
25 KVA T/F
34
ACSR Weasel Conductor
35
TF 11/0.4 KV 250 KVA
36
LT PVC Cable AL 1x240 sqmm
37
LT DISTRIBUTION BOX
38
LT ABC 3*50+1*35+1*16 SQ MM
39
LT ABC 3*120+1*95+1*16 SQ MM
40
LT XLPE Cable AL. 1x120 sq.mm
41
LT XLPE Cable AL. 1x240 sq.mm
42
LT XLPE Cable AL. 1x400 sq.mm
43
Dismantling of Structures/ Line and received back of the scrap Material from site to ESC Bijnor/ Dhampur with loading & unloading at both ends respectively (as per resspo norms)
44
10 KVA TF
45
100 KVA T/F
46
160 KVA T/F Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
