|
| 1 | Part - A ( Material)Following Material Supplied by the Contractor:- |
| 2 | G.I. Pipe 6'' dia |
| 3 | Stone Pad |
| 4 | PG Clamp |
| 5 | Barbed wire |
| 6 | Number Plate with Clamp |
| 7 | Clamp with Nut & Bolt |
| 8 | Danger Board with Clamp |
| 9 | Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 50 Kms. (distance approx) |
| 10 | S.T. Pole 11 Mtr. long |
| 11 | PCC Pole 8.5 Mtr. Long |
| 12 | 11 KV XLPE Cable 3x185 sqmm |
| 13 | 11 KV Out door Cable Jointing kit 3x185 |
| 14 | 11 KV Indoor Cable Jointing kit 3x185 |
| 15 | 11 KV Staight Through Cable Jointing kit 3x185 |
| 16 | 11 kv VCB for outgoing CTR 200/100/5 Amp. 350 MVA |
| 17 | Other matching Materials |
| 18 | Dragging of ST/PCC Pole from dump site to pit site |
| 19 | Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor) |
| 20 | Earthing of Pole as Per RESSPO Norms |
| 21 | Laying of Cable 11 KV 3x185 sq mm D/C XLPE in Duct/ HDD & Tranch (All the material will be supplied by the contractor except 11 KV XLPE cable) with route marker. |
| 22 | Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor) |
| 23 | Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.) |
| 24 | Installation of Heat Shrinkable Type cable jointing kits indoor end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.) |
| 25 | Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.) |
| 26 | Installation of 11 kv VCB for outgoing CTR 200/100/5 Amp. 350 MVA complete work with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm including control wiring, commissioning & testing in all respect as per RESPO norms.(All decentralised materials to be provided by Contractor). |
| 27 | Concrecting of Pole with Muffing |
| 28 | Railway Crossing Permission Fee |
| 29 | Rect Back old and used Materials etc. Including Cable Iron Drum to store. Please Enable Macros to View BoQ information |
