|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.50 M and lead upto 30M. Including watering ramming and dressing etc. and disposal of surplus earth as upto a distance of 30 M. from the foundation trenches.etc. required for proper completion of the work. SI.No.251. |
| 2 | Concrete with 4 cm gauge brick ballast Coarse sand of2.25 F.M and cement in proportion of 1:4:8 in foundation and under floor including supply of all materials labour T & P etc. required for proper completion of the work. S.I.No.275 |
| 3 | M- 150 brick work in 1:6 cement & C sand in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I.No. 303 |
| 4 | R.C.C work with cement approved coarse sand and 2cm. Gauge approved dalla grit proportion of 1:2:4 in R.C.C Tie beam S.I.No. 283 |
| 5 | Earth work by cartage from 2.00 km diatance ramming Dressing and Levelling for completion work as per S.I. No. 253 |
| 6 | M- 150 brick work in 1:6 cement & C sand in super structure including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I.No. 303, 309 & 310 |
| 7 | M- 150 brick work in 1:6 cement & C sand in super structure including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I.No. 303, 309, 310 & 310a. |
| 8 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:2:4 inR.C.C Slab S.I. No. 284(a) |
| 9 | Mild steel iron in plain work such as in reinforced concrete or rein force brick work wrought to required shape as necessary cutting. bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured required to proper completion of the work S.I.No. 504 |
| 10 | 12 mm thick plaster on roughface of wall with cement mortar consising of 1 part cement and 4part of approved coarse sand. Minimum thickness not to be less then 10 mm including supply of all materials, labour and T & P etc. required for completion of work. as per S.I.No. 584 & 596 . |
| 11 | Same as item No. 12 above but in Plain surface |
| 12 | 25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse and 2 cm Graded approved stone ballast laid in panels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ration 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, local sand and brick ballast 4 cm. Gauge in the porportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish, including supply of all materials, labour T&P etc. required for proper completion of the work. S.I. No. 601 |
| 13 | Supply and fixing 6 mm. china white glazed tiles tiles in flooring or in skiring or Dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required of proper comletion of work. as per S.I.No. 628 |
| 14 | Mild steel or iron work in heavy sizes such as trusses, built up gates, record racks, roof work, gates etc ; wrought to required form, including drilling holes rivetting or welding where necessary & their fixing. required for proper completion of the work. as per S.I.No. 503 |
| 15 | Supply and fixing of anodizod alumium door having 5 mm thick aluminum section excluding coating and an averge coating of 20 micron fully glazed made of aluminum door tube size 83.5 x 44.65 m as vertical member and 1140 x 44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminum tublar vertical with two open able shutter, the rate will including cost of material fixtures 4 mm glass handles locks screw necessary bendign and excluding cost of floor spring if required for proper completion of the work. as per direction of Engineer in charge |
| 16 | One priming coat of cement primer and one coat dry distemper on new work including supply of all materials, labour and T & P etc. as per S.I.No. 649 & 650 |
| 17 | Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials labour and T & P etc. as per S.I.No. 660 & 661 |
| 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle ever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DAR 17.1 as PWD SOR December, 2020 |
| 19 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern DAR 17.4 as PWD SOR December, 2020 |
| 20 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litreP.V.C. automatic flushing cistern DAR 17.6.1 as PWD SOR December, 2020 |
| 21 | Provision of 100 mm dia. P.V.C. pipe. |
| 22 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer- in-charge, upto 90 metre depth below ground level. SOR Lucknow 2020-21 Chapter 23 -1 (23.1.1.1) - 300 mm dia |
| 23 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in- charge. SOR Lucknow 2020-21 Chapter 23 -3 (23.3.1) |
| 24 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia SOR Lucknow 2020-21 Chapter 23 -4(23.4.2) |
| 25 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. SOR Lucknow 2020-21 Chapter 23 -8 (23.8) |
| 26 | Submersible Pump of 1.50 HP made of Kirloskar as per Market Rate. (Only for Estimate) |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DAR 18.48 as PWD SOR December, 2020 |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Chapter- 20 item no. 1 (DAR 18.70) as PWD SOR December, 2020 ==15 mm nominal outer dia pipes |
| 29 | 25 mm nominal outer dia pipes |
| 30 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore Chapter- 20 item no. 1 (DAR 18.15.1) |
| 31 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore Chapter- 20 item no. 1 (DAR 18.16.1) |
| 32 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore Chapter- 20 item no. 1 (DAR 18.17.1) Please Enable Macros to View BoQ information |
