|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor ncluding removing rubbish within a ead of 75 m as directed. |
| 2 | Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masomy wall and refitting the same and mending good damages after repairs. |
| 3 | Labour for taking out door and window frame including shutter or repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. |
| 4 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete. Iron Butt Hinges and M.S clamps. {The quantum should be correted upto three decimals).(e) Sal: MalayasianDoor, Window & Fan Light : |
| 5 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thickwith uniform texture & without decorative veins in columns,wall, facia etc. with 15 mm thick [avg] cement mortar (1:2)including making suitable arrangements to hold the stonesproperly by brass / copper hooks including pointing in cementmortar (1:2) (1 white cement : 2 marble dust) with admixtureof pigment matching the stone shades all complete as perdirection of the Engineer-in-charge including cost of allmaterials, labours, scaffolding, staging ,curing androughening of concrete surface complete. Area of eachGranite slab > 0.6 upto 1.0 square metre.[Using cement slurry at back side of granite @ 4.4 kg/sq.m &white cement slurry for joint filling @ 1.8 kg/sq.m] |
| 6 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(l:2:4) as per direction. (Cost o concrete will be paid separately).(c) 40mm X 6mm, 125mm Length |
| 7 | Styles and rails of wooden shutters fitted and fixed complete. Payment to be made on area of new work only). In Ground Floor(ii) 35mm Thick shutter.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 8 | Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made).(ii) 19mm thick panel of 30cm to 45cm width(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 9 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm. |
| 10 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S W.I. Flats and bars of windows, railing etc fitted and fixed with necessary screws and lugs in ground floor. |
| 11 | Easing door and windows. |
| 12 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 4mm Thick |
| 13 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,rf any, in gound floor as per relevant IS codes. |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar(b) 20 mm thick plaster |
| 15 | (c) 15 mm thick plaster |
| 16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With (ii) With 1:4 cement mortar(c) 10 mm thick plaster Clamp Fixing area |
| 17 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE: Cement 0.152 cu.m. per 100 sq.m. |
| 18 | Renewing IRC fabric mesh of 75mm x 50mmx4.5mmx2.7mm on 50mm x 50mm x6mm old angle iron frames all round and one 37.5mm x 6mm M.S. flat bar over the netting all round welded to angle iron frame and providing locking arrangements if necessary and with two coats of synthetic enamel paint(Otherthan Hi-gloss) fitted and fixed with clamps or haskal doomney etc. complete including flat stiffeners on every 1.0 m apart both ways. Cost of Concrete for fixing will be paid separately) |
| 19 | Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer's specification)including cleaning and smoothning of surface.Two Coats |
| 20 | Removingoldscales,blistersetc.of interiorsurfaceofwalls,ceilingbyscrapingetc.andpreparingsmoothandevensurfacewithrenderingorcementmortar (1:2) (asnecessary), tomake the surface suitable forreceivingdistemper.(Paymentagainst thisitemwillbemadeonlywhenthis has been done on the specific direction of the Engineer-in-charge). |
| 21 | Scraping and removing greasy soot from walls or ceiling of kitchen orsimilar smoke affected rooms and preparing the surfac |
| 22 | (b) Priming one coat on timber of plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 23 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 24 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. pn the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) -[iv) Two coat (with any shade except white) |
| 25 | On steel or other metal surface :With super gloss (hi-gloss) Two coats (with any shade except white) |
| 26 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) Wall WithSandCementMortar (1:3) 15mmthick&2mmthickcement slurry at back side of tiles using [email protected]/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white |
| 27 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without anybacking course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make asdirected and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to themanufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor)b) In Ground Floor: Sizes -600mm x 600mm x10mm with breaking strength> 1500 N |
| 28 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to the manufacturer'sspecification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be suppliedby the contrr]e) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment. B) Light Colour |
| 29 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 30 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &513(B) & Model- Tropical / Sumthing Special of ESSCO or similar |
| 31 | Supplying, fitting and fixing shower of approved brand and make (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & ModelTropical / Sumthing Special of ESSCO or similar brand) |
| 32 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed Work(a) (i) 15 mm dia. light quality |
| 33 | (b) (i) 20 mm dia. light quality |
| 34 | Supplying, fitting and fixing stainless steel sink complete with wastefittings and two coats of painting of C.I. brackets(a) Sink only(i) 530 mm X 430 mm x 180 mm |
| 35 | Supplying, fittingand fixingwhitevitreous chinabest qualityapprovedmakewashbasinwithC.I. bracketson75mmX75mmwoodenblocks,C.P.wastefittingsof32mmdia.,oneapprovedqualitybrassC.P.pillarcockof15mmdia.,C.P.chainwithrubberplugof30mmdia.,approvedqualityP.V.C.wastepipewithC.P.nut32mmdia.,900mmlongapprovedquality P.V.C. connection pipe with heavy brass C.P. nut includingmendinggoodall damagesandpainting thebracketswith twocoatsofapproved paint.(ii) 550 mm X 400 mm size |
| 36 | Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position complete excluding 'P' or'S' trap (excluding cost of concrete for fixing)(ii) 530 mm X 410 mm |
| 37 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware ofapproved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap |
| 38 | Supplying, fitting and fixing of BATHTUB 1800x920x400mm) ofApprovedmake or brand. (Model Code no.-B2520106 of CERAorEquivalent)(b) Repair WorksDismantling wash basin with brackets with or without waste fittings. |
| 39 | Supplying, fitting and fixing of BATHTUB 1800x920x400mm) ofApprovedmake or brand. (Model Code no.-B2520106 of CERAorEquivalent)(b) Repair WorksDismantling sink with brackets with or without waste fittings.(ii) Above 450 mm and upto 600 mm length |
| 40 | (b) Repair WorksDismantling Indian W.C. including taking out base concrete as necessary. |
| 41 | (b) Repair WorksDismantling E.P. or Anglo-Indian W.C |
| 42 | Supplying, fittingandfixing10litreP.V.C. low-downcisternconformingtoI.S. specificationwithP.V.C. fittingscomplete,C.I. brackets includingtwocoats of painting to bracket etc. |
| 43 | Sub Total |
| 44 | GST 18% |
| 45 | CESS 1% Please Enable Macros to View BoQ information |
