|
| 1 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 2 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed. |
| 3 | Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. |
| 4 | Taking up / down unserviceable GI pipe of 15mm bore water mains and connections/fittings of any type from trenches/ walls / floors (of any location) for replacement / re-use in old / new location/diversion complete all as specified and directed. Note: Necessary earthwork, if any , will be measured and paid separately under relevant items |
| 5 | All as per Items No 4 above but dia of Pipe 20 mm. complete all as specified and as directed. |
| 6 | All as per Items No 4 above but dia of Pipe 25 mm. complete all as specified and as directed. |
| 7 | All as per Items No 4 above but dia of Pipe 40 mm. complete all as specified and as directed. |
| 8 | All as per Items No 4 above but dia of Pipe 50 mm. complete all as specified and as directed. |
| 9 | All as per Items No 4 above but dia of Pipe 80 mm. complete all as specified and as directed. |
| 10 | All as per Items No 4 above but dia of Pipe 100 mm. complete all as specified and as directed. |
| 11 | Supplying, laying, jointing and testing GI Pipe of 15mm dia medium grade inclusive of all fittings such as bends, Tee, union, elbow, reducer and Socketed etc. ISI marked of following sizes of pipe, complete all as specified and directed. Note: Necessary earthwork, if any , will be measured and paid separately under relevant items complete all as specified and as directed. |
| 12 | All as per Items No 11 above but dia of Pipe 20 mm. complete all as specified and as directed. |
| 13 | All as per Items No 11 above but dia of Pipe 25 mm. complete all as specified and as directed. |
| 14 | All as per Items No 11 above but dia of Pipe 40 mm. complete all as specified and as directed. |
| 15 | All as per Items No 11 above but dia of Pipe 50 mm. complete all as specified and as directed. |
| 16 | All as per Items No 11 above but dia of Pipe 80 mm. complete all as specified and as directed. |
| 17 | All as per Items No 11 above but dia of Pipe 100 mm. complete all as specified and as directed. |
| 18 | M&L for 3- layer PP-R Polypropylene random copolymer) pipes 20 mm SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded olypropylene random fittings laid in trenches/fixed to wall including necessary clamps where ever required nuts, bolts class PN 1.6 conforming to IS 14846-2000. ISI Marked of following sizes complete all as specified and directed. |
| 19 | All as per Item No 18 above but 25 mm dia. complete all as specified and as directed. |
| 20 | All as per Item No 18 above but 40 mm dia. complete all as specified and as directed. |
| 21 | Dismantling and taking out from trenches/duct/wall the existing old u/s DI pipe any type/size with spigot and socketed ends including all fittings such as bends, elbow and Tees etc. of following sizes complete all as specified and directed. (Note: Excavation and earth work will be measured and paid for separately) |
| 22 | Supply, laying, jointing and testing ductile iron pipes of 150 mm inner diameter with Spigot and Socket ends , Class K7 including rubber tyton gasket joints in any length, ISI Marked (IS 8329 : 2000) laid in trenches complete all as specified and directed. |
| 23 | All as per Item No.22 above but 100 mm dia complete all as specified and as directed. |
| 24 | Supply & fixing in replacement of old Sluice valve of size 150mm dia including CI body with Gun metal/Steel spindle with hand operated iron wheel both ends flanged and drilled including ring, nuts, bolts class PN 1.6 conforming to IS 14846-2000. ISI Marked complete all as specified and directed. by Engr-in charge |
| 25 | All as per item No. 24 above but for 100 mm dia. complete all as specified and as directed. |
| 26 | All as per item No. 24 above but for 80 mm dia. complete all as specified and as directed. |
| 27 | Supply and fix in replacement Butterfly valve for 150 mm dia pipe ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete all as specified and directed. |
| 28 | All as per item No. 27 above but for 100 mm dia. complete all as specified and as directed. |
| 29 | Supply & fixing in replacement including taking down old Gun metal/globe/ gate valve for dia 50 mm with iron wheel handle screwed at both ends ISI marked suitable for GI pipe complete all as specified and directed. |
| 30 | All as per item No. 29 above but for 25 mm bore. complete all as specified and as directed. |
| 31 | All as per item No. 29 above but for 20 mm bore. complete all as specified and as directed. |
| 32 | All as per item No. 29 above but for 15 mm bore. complete all as specified and as directed. |
| 33 | Taking down and Relaying serviceable CI/DI pipe 150 mm dia complete all as specified and directed.Note : Lead joint and earth work shall be measured and paid separately. |
| 34 | All as per item No. 33 above but for 100 mm dia. complete all as specified and as directed. |
| 35 | All as per item No. 33 above but for 80 mm dia. complete all as specified and as directed. |
| 36 | Boring under roads/paths suitable for passing the 150mm /100 mm /80 mm bore CI /DI pipe including making arrangement necessaru T&P as required,.complete all as specified and directed. |
| 37 | S&F in replacement Cast Iron Air release Valves with single air Outlets ISI marked with nut, bolts, washers and rubber gasket of following sizes 80 mm dia bore and fixing up in Cast Iron Water supply mains complete all as specified and directed. |
| 38 | All as per Item No 37 above but for 100 mm dia pipe. complete all as specified and as directed. |
| 39 | Supply and fix in replacement cast iron non return butter fly valve for 150 mm dia pipe ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete all as specified and directed. |
| 40 | Cutting existing CI/DI pipe upto 150 mm dia in position for inserting fittings/valves including taking out residual water from the pipe line complete all as specified and directed. ( Excavation , earthwork joints, and jointing material shall be measured and paid for separately) |
| 41 | All as per item No. 40 above but for 100 mm dia. complete all as specified and as directed. |
| 42 | All as per item No. 40 above but for 80 mm dia. complete all as specified and as directed. |
| 43 | Material and labour for painting to CI/DI Pipe line 150/100/80 mm dia with 1 coat syntietic enamel paint over a coat of red oxied primer of approved colour complete all as spacified and as directed. |
| 44 | Demolation of broken valve chamber of any size/type including PCC foundation and angle iron frame with cover complete all as spacified and as directed. |
| 45 | Material & labour for construction of brick masonary valve pit of size 1000x1000x900mm (internal dimension) with frame of angle iron and MS sheet cover 3 mm thick and locking arrangements and 40x40x6 mm angle iron frame duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling and removal of existing broken MS frame and cover etc. complete all as spacified and as directed. |
| 46 | Material & labour for construction of brick masonary valve pit of size 900x900x900mm (internal dimension) with frame of angle iron and MS sheet cover 3 mm thick and locking arrangements and 40x40x6 mm angle iron frame duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling and removal of existing broken MS frame and cover etc. complete all as spacified and as directed. |
| 47 | Construction of brick masonary valve pit in replacement of size 600X600X600 MM ( internal size) type A for gate valave 50/40/25 mm dia complete all as specified and shown on drawings including MS cover 3 mm thick including locaking arrangement and 40x40x6 mm angle iron frame duly painted with two coats of sythetic enamel paint over a coat of red oxide primer including necessary earthwork , material and labour complete all as spacified and as directed. |
| 48 | Supply and fix in replacement PP-R Gate valves (brass insert) for dia 20 mm including taking down old unserviceable Gate valve complete all as specified and directed. |
| 49 | All as per item No. 48 above but for 25 mm dia. complete all as specified and as directed. |
| 50 | M&L in replacement for flanged joint suitable for 150 mm dia CI/DI pipe and fittings joints with rubber fiber board gasket complete all as spacified and as directed. |
| 51 | M&L in replacement for flanged joint suitable for 100 mm dia CI/DI pipe and fittings joints with rubber fiber board gasket complete all as spacified and as directed. |
| 52 | M&L in replacement for flanged joint suitable for 80 mm dia CI/DI pipe and fittings joints with rubber fiber board gasket complete all as spacified and as directed. |
| 53 | M&L in replacement for run lead joint suitable for 150 mm dia CI/DI pipe and fittings joints complete all as spacified and as directed. |
| 54 | M&L in replacementfor run lead joint suitable for 100 mm dia CI/DI pipe and fittings joints complete all as spacified and as directed. |
| 55 | M&L in replacement for run lead joint suitable for 80 mm dia CI/DI pipe and fittings joints complete all as spacified and as directed. |
| 56 | Supply fix in repair Ball valves bearing ISI Mark high pressure with polythene float and flynut complete including connection with existing iron pipe and brass ferrule with necessary fittings for iron pipe of 40 mm bore complete all as spacified and as directed. |
| 57 | All as per item No. 56 above but for 25 mm dia pipe. complete all as specified and as directed. |
| 58 | All as per item No.56 above but for 20 mm dia pipe. complete all as specified and as directed. |
| 59 | All as per item No. 56 above but for 15 mm dia pipe. complete all as specified and as directed. |
| 60 | Supply & fixing in replacement of old Tank cover for water storage tank of capacity 500/1000/2000 ltrs (cylindrical vertical with closed top) complete all as spacified and directed. |
| 61 | Dismantling old unserviceable polythene water storage tank of capacity exceeding 500 ltr from any hight complete all as specified and directed. Note- The cost of disconnecting inlet and outlet water tube is deemed to be included in the unit rate. |
| 62 | All as per item No. 61 above but of tank capacity exceeding 1000 ltr. complete all as specified and as directed. |
| 63 | All as per item No. 61 above but of tank capacity exceeding 2000 ltr. complete all as specified and as directed. |
| 64 | S & F double layered Rotational moulded polyethylene water storage tanks 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified and dircted. Note- The cost of connecting inlet and outlet water tube is deemed to be included in the unit rate complete all as spacified and as directed. |
| 65 | All as per item No. 64 above but of tank capacity 1000 ltr. complete all as specified and as directed. |
| 66 | All as per item No. 64 above but of tank capacity 2000 ltr. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 67 | All as per item No. 64 above but of tank capacity 2000 ltr. complete all as specified and as directed. Please Enable Macros to View BoQ information |
