|
| 1 | Material and Labour for excavation in trenches not exceeding 1.5 metres in depth and not exceeding 1.5 metres wide in soft disintegrated rock for foundation and getting out all as specified and directed. |
| 2 | Material and Labour for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation filling and mass concrete all as specified and directed. |
| 3 | Material and Labour for machine cut Laterite stone masonry exceeding 10 cm in width square rubble, regular coursed, well bonded, bedded and solidity hearted, built in cement mortar 1:6 all as specified and directed. |
| 4 | Material and Labour for rendering 15 mm thick in cement mortar 1:6 on fair of laterite masonry work finished even and smooth without using extra cement all as specified and directed. |
| 5 | Material and Labour for cement concrete (1:2:4) type B-1 using 20 mm grade stone aggregate as in kerbs or benching etc.including necessary form work complete all as specified and directed. |
| 6 | Material and Labour for Moorum/red bajri filling in floors or paving, laid in layer not exceeding15 cm thick, spread, levelled and rammed, rolling including watering all as specified and directed. |
| 7 | Supplying and staking including loading unloading & transportation, of good soil well sieved 90% to pass through IS Sieves of 10 mm size free from stones rubbish like lumps stones roots and other foreign material suitable for gardening, the soil should be fresh from quarry. The colour of the soil generally red/grey including cost of all royalty and carriage all tools, plants, taxes, octroi etc all complete as specified and directed. Note: Stack measurement of earth shall be reduced by 20% for payment towards voids |
| 8 | Supply and Fixing of 75mm dia PVC (SWR) half perforated pipes double socketed, in any length with rubber ring joints, laid in trenches, in floors and fixed on walls. complete all as specified and as directed. |
| 9 | Supply and Fixing of 75mm PVC (SWR) plain bend any radius, complete all as specified and as directed. |
| 10 | Material and Labour for Graded coarse aggregate of nominal size 12.5 mm as in filling of trenches of drain pipe all as specified and as directed. |
| 11 | Excavation in post holes (or similar holes) in SDR each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metres and making good surface all as specified and directed. |
| 12 | Supply and Fixing for Steel work in tubular trusses including special shaped washer, nut, bolt etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed. |
| 13 | Supply and Fixing of football goal post net of grid size up to 100 mm x100mm complete including fitting and fixtures at any height and description all as specified and directed. |
| 14 | Material & Labour for preparing new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new / prepared surfaces. Note - primer and emulsion to be carried out through air less spray machine (Mechanical means) complete all as specified and directed. |
| 15 | Material and Labour for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified |
| 16 | Removing excavated material not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metres above the starting point all as specified and directed. |
| 17 | Returning filling in excavated earth including spreading, levelling watering and well ramming in layer not exceeding 25 cm in soil all as specified and directed. |
| 18 | Material and Labour for Hot dip galvanised Iron octagonal pole of height 7 metres minimum galvanising of 70 microns, top 70 mm , bottom 130 mm and 3 mm sheet thickness in single section without any weld joints with square plate of minimum dimensions 225x225x12 mm, foundation bolts of size M-24x750 mm long - 4 nos, Bakelite sheet with including one No TP MCB suitable rating Amps and 16 mm stud type connectors -04 nos inside the pole at the door opening for cable connections, fabrication of GI bracket to carry out the 4 nos flood light, all fixed and bolted on including suitable RCC pedestal of minimum size 0.4mx0.4mx1.4m including form work , Mast and pole shaft shall be be as per BSEN 10025,IS 5986, ASTM A572 , Galvanization as per IS-4759/2629 and as per manufacturers design & drawing recommendations and specifications complete all as specified and directed. |
| 19 | Supply, laying, jointing and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core completed all as specified and directed. |
| 20 | Supply and Laying HDPE Pipe class PN 10 of size 50 mm bore dia for protection of underground cables completed all as specified and directed. |
| 21 | Supply and Fixing of PVC insulated and PVC round sheathed 3 core 2.5 sqmm Copper conductor flexible industrial cable, 1100 Volts conforming to IS:694 including all fitting complete all as specified and directed. |
| 22 | Supply and Fixing of MCB TPN 40 Amps 415 Volts 10 KA rating complete all as specified and directed. |
| 23 | Supply and Fixing of MCB TP 32 Amps 415 Volts 10 KA rating complete all as specified and directed. |
| 24 | Supply and Fixing of LED Flood light 210 Watts 230 Volts AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant with driver and lamp, complete all as specified and directed. |
| 25 | Supply and Installation of fast earth electrode 3.0 metres length size model F84, having two M S pipe one inside the other with proper not deep galvanised outer dia 88 mm and inner dia 48 mm and the cavity between the rod pipes is filled with ground resistance improment powder, sealed with both en outer pipe of electrode should be zinc coated, the electrode should buried directly in the ground by making boring of diameter 10\\" with boring machine highly conductive non-magnetic and non-corrosives is to be connected with GI strip 25x4 mm to facilitate further connection to earth dolly and provision of earthing chamber in bricks wall size 45x45x15 cm an having PCC cover of required size as per IS 3034 (1981) complete all as specified and directed. Note:-GI strip to be measured and paid separately. |
| 26 | Material and Labour road cutting and repairing the same with road patch material width up to 75cm for laying 40 mm dia pipe as per the necessity at site complete all as specified and directed. |
| 27 | Steel tubing GI light grade 40 mm dia for cable protection passing under road /floor or for fixing to poles all as specified and directed. |
| 28 | Material and Labour of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25X4 mm dia galvanised iron all as specified and directed. Please Enable Macros to View BoQ information |
