|
| 1 | Demolition of brick work of any type built in cement mortar complete all as specified and directed. |
| 2 | M& L for Brickwork with subclass \\"B\\" bricks bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1: 6 Complete all as Specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. |
| 4 | M & L for 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | Supply only integral water proofing compound Complete all as specified and directed. |
| 7 | M & L for preparation of New plastered surfaces of walls and applying two coats of cement base paint walls including exterior wall putty complete all as specified and directed. |
| 8 | M & L for complete removal of existing treatment of old plastered wall surfaces by scrapping and applying two coats of Exterior weather proof paint over and including a layer of wall care putty complete all as specified and directed. |
| 9 | M & L for preparation of New plastered surfaces of walls and applying two coats of oil bound distemper on walls etc complete all as specified and directed . |
| 10 | M & L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper on walls etc complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing) & rubbish off the premises complete all as specified. |
| 12 | M&L for 50 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor including finishing concrete surface even and smooth without using extra cement complete all as specified. |
| 13 | M & L for Vitrified tiles of light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match Complete all as Specified and Directed. |
| 14 | M & L for Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in wall and vertical surfaces such as skirting & Dados etc. set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match as Specified and Directed. |
| 15 | S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match as specified and directed. |
| 16 | S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match as specified and directed. |
| 17 | S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match as specified and directed. |
| 18 | M & L for Glazed ceramic coloured tiles in vertical surface of size 450x 300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 to Match with the grade of existing tile complete all as specified and directed. |
| 19 | M&L for Rubber Moulded Chequered Cement concrete tiles 20cm x 20cm x25mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, with grey cement and Coloured pigments incl 15 mm thick screed bed with CM 1:6 complete all as specified and directed. |
| 20 | Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 21 | M & L for cement concrete 1:7:12 ype F-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete or sunken etc complete all as specified & directed |
| 22 | M & L for cement concrete Padding B-0 1:2:4 using (using12.5mm graded stone aggregates) 40mm thick in sunken of bath/toilet/WC etc with and including WPC as per manufacture's instructions complete all as specified & directed |
| 23 | M & L for sunken treatment of bathroom/toilet/WC etc by cleaning and removing all the loose marble, laitance, dirt, dust etc by chisel hammer with brush and fixing APP modified polymer membrane (Wt not less than 3 Kg/sqm) as a coat of bitumen not below 1.2 Kg/sqm as primer ever a coat of bitumen not below 0.3 kg/sqm over and including 15mm thick plaster in cm 1:3 & Dr fixit Pidilite liquid WP solution 200 ML per 50 Kg of cement bag both horizontal & vertical surface including connection with sprout pipe of Galvanised iron of dia 50 mm bore at the outlet of bldg complete all as specified & directed |
| 24 | S&F in repair 20 mm dia Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified & directed |
| 25 | Disconnecting existing PVC water tanks exc. 500 and litre capacity n. exc. 1000 litre capacity , setting aside for treating the plateform surfaces and hoisting if required reconnecting and refixing in position after cleaning of existing Tank complete all as specified & directed |
| 26 | Taking down old existing water proofing treatment from the top of RCC roof slab/ arch roof slab, including demolition of PCC padding or plaster and existing tiles on the top/ mud phuska of any thickness and raking out joints of arch slab or hacking the top of RCC slab, cleaning with water and wire brushes and disposal/removal of rubbish material out side of MOD land complete all as specified & directed |
| 27 | Material & labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof curbs ,bed blocks, bed plates or similar works including necessary form work complete all as specified & directed |
| 28 | Cutting grooves in brick/ concrete wall 75 mm wide and 65 mm deep and shaping horizontal face of groove and making good disturbed surface in CM 1:3 after inserting APP membrane (Chasing shall be cut where height of parapet wall is more than 300mm.) complete all as specified & directed. |
| 29 | M&L for PCC padding 1:2:4 Type B-1 (using 20mm graded stone aggregate) average thickness 40mm, finished fair and even without using extra cement on roof surfaces complete all as specified & directed |
| 30 | M&L for water proofing treatment of roof slab all as specified below :- (a) preapration of concrete surfaces as directed (b) M&L for brushing neat cement slurry with 3 Kg, of cement per square metre complete all as specified & directed . (c) Preparation of roof surface by brushing cleaning and M&L for applying 10mm thick plaster in CM 1:4 with water proofing compound @ 2% by weight of cement. (d) Applying a priming coat with bitumen primer @ 0.30 Kg/Sqm. (e) Applying a hot blown bitumen grade 85/25 @ 1.20 kg/Sqm. (f) Laying polymeric water proofing membrane 3 mm thick and weighing not less than 3.5 Kg/Sqm. |
| 31 | M&L for 40 mm thick brick tiles laid on 15 mm thick cement mortar in CM 1:6 joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed. |
| 32 | S&F (in repairs) PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls of 110mm bore with necessary fittings complete all as specified & directed |
| 33 | Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed. |
| 34 | S&F in repair 20 mm dia ball valves PTMT , high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete. |
| 35 | Taking up or down steel tubing and connections of walls, ceiling, floor etc of 15mm bore complete all as specified & directed. |
| 36 | Ditto as per item no 35 but 20 mm bore complete all as specified & directed. |
| 37 | Supply & fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 38 | All as per serial item No. 37 above, but 20mm bore complete all as specified & directed |
| 39 | Supply & fixing in repair of 20mm outer dia, CPVC pipes of pressure rating 10 Kgf/Sqcm including all fittings,adhesive for joints and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 40 | Supply & fixing in repair of 25 mm outer dia, CPVC pipes of pressure rating 10 Kgf/Sqcm including all fittings,adhesive for joints and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 41 | Cutting chases, pining in making good in CM 1:3 for concealed water tubing, cutting n.exc 10 cm complete all as specified & directed |
| 42 | Supply & fixing rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings Including ball valve of dia 20 mm all as specified including dismantling existing water tanks complete all as specified & directed. |
| 43 | Supply & fixing rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings Including ball valve of dia 20 mm all as specified including dismantling existing water tanks complete all as specified & directed. |
| 44 | S& F of Mild steel cover sheet water tank cover made out of 1 mm thick GI steel sheetwith sharp spikes for prevention of its lid with monkey of design and pattern as approved by GE and suitable for 500 and 1000 Ltr tank as the case may be fixed with machine screw etc Complete all as specified and directed. |
| 45 | M& L for granite (of any type) work (table rubbed and polished) 20 mm thick in steps,cills,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 46 | M& L for granite (of any type) work (table rubbed and polished) 20 mm thick For wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 47 | Demolition of cement Concrete as in ground floors and pavings not exc 15 cm thickness (above or below) of any description and in any position not otherwise specifically provided Complete all as specified and directed. |
| 48 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 10 mm wide to the full depth of PCC at every 3 metre and filled with sealing compound grade complete all as specified & directed |
| 49 | Taking down chowkhats with shutters (without taking off shutter from the frame) exc 1.50 sqm but n.exc 4.00 Sqm each and removal from site, complete all as specified and directed. |
| 50 | S&F in repair of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings. |
| 51 | S & F in repair of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 52 | S & F 100 mm Butt hinges made of stainless steel and fixed complete all as specified and as directed. |
| 53 | S&F 150mm aluminium anodised barrel tower bolts of extruded section all as specified and directed. |
| 54 | S&F, aluminium handles 100mm size, cast type, anodised complete all as specified and directed. |
| 55 | S&F in repair mild steel barrel tower bolt of size 150mm stove enamalled black with bright bolt and fixed complete all as specified and directed. |
| 56 | S&F in repair mild steel pressed handle oval type stove enamalled black size-150mm complete all as specified and directed. |
| 57 | S & F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in steel frame/wooden and fixed with stainless wire staples complete all as specified & directed |
| 58 | S & F in repair of Sheet glass 3 mm thick ordinary quality and glazing with oil putty in suqares n exc 0.5 Sqm in each pane complete all as specified & directed |
| 59 | M&L for pre-laminated particle board 19mm thick, interior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves fixed in repair complete all as specified & directed |
| 60 | S& F in repair single piece EWC with UF seat cover hinges,fixing accessories set,cistern fittings,rim Less tornado flushing size 360 680x750 mm complete all as specified & directed |
| 61 | S&F in repairs Aluminium (extruded section) body Door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed |
| 62 | Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards / slabs / blankets of any thickness including cover fillets complete all as specified and as directed. |
| 63 | Supply & Fixing GI seamless ceiling comprising of GI perimeter channel0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit approx 900 mm centre to centre GI cleat and steel expansion fasteners with and including ceiling section ( Not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channelwith connecting clips across the intermediate channel at 457 mm centre to centre for false celling comprising of the following sections for making partitions of 600 x 600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 4 mm dia GI wire suspender of suitable length complete all as specified and as directed . |
| 64 | S & F of prelaminated E - type particle board of 9 mm thickness fixed with staples on snap grid as in ceiling complete all as specified and as directed. |
| 65 | All as described item No 64 here-in-before above but except material complete all as specified and as directed. |
| 66 | S & F in repair of Brass CP wash basin mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 67 | S & F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 68 | S & F of Brass chromium plated shower rose 125 mm size including shower arm complete all as specified and directed. |
| 69 | S&F in repair of PVC connections 15mm size with PTMT nuts of length 450 mm Complete all as Specified and directed. |
| 70 | S&F in repair 15 mm bore dia Stop/angle valves CP fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions but fancy type complete all as specified and directed. |
| 71 | S&F in repair of 15 mm bore dia Bib tap standard of CP any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed. |
| 72 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed |
| 73 | S & F in repairs vitreous china hand wash basin white exclusive quality with pedestal size 550 x 400 mm including brackets fixed complete all as specified and directed. |
| 74 | S&F of in repair of Ball PTMT valve of 15 mm bore dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed |
| 75 | S&F of in repair of Ball PTMT valve of 20 mm bore dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed |
| 76 | S&F of in repair of Ball PTMT valve of 25 mm bore dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed |
| 77 | S&F of Pillar taps,15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts fancy type , screwed for iron pipe and fixed complete all as specified & directed |
| 78 | S&F of PVC valveless, syphonic action type, flushing cistern, capacity 10 lits, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 79 | S&F of PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed |
| 80 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and making good to floors complete all as specified & directed |
| 81 | S&F in repair of 32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and Including waste pipe other end fixed complete all as specified & directed |
| 82 | S & F in repairs Flushing jet for pedestal pattern WC incl all fittings complete all as specified & directed |
| 83 | S & F in repairs hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hook complete all as specified & directed |
| 84 | S&F 25 in repair mm dia PVC coated metalic fancy type of approved finish curtain rod incl. brackets and fancy type end knobs/End brackets, rings etc including fixing arrangement with drilling holes in walls,supported with wall brackets complete all as specified. |
| 85 | S&F brass CP mixer for mixing of hot & Cold water screwed down for iron pipe and fixed to 15 mm pipe as in repairs complete all as specifed and directed. |
| 86 | S& F concealed stop cock regular body suitable for 15 mm pipe line with spindle extension & plastic protection cap with exposed parts complete all as specified & directed |
| 87 | M&L for brass spindle of reqd size for CP/brass bib tap, pillar taps & Hot and cold mixer etc complete all as specified and directed. |
| 88 | S& F of 15 mm dia nozzle pipe of wash basin mixer complete all as specified and directed. |
| 89 | S& F of 15 mm dia brass nozzle male thread complete all as specified and directed. |
| 90 | S& F of CP plated bottle trap of dia 32 mm dia heavy duty type for wash basins with inlet and outletscrewed for pipe or connections includingall connected fittings including cutting chasing in wall Complete all as specified and directed. |
| 91 | M&L for PVC rubber washer suitable for bib tap, pillar tap etc complete all as specified and directed. |
| 92 | S& F in repair stainless steel kitchen plate rack wall mounted of overall minimum size 750 x 600 mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel gauge,fixed with rawl plug and CP steel screws complete all as specified and directed. |
| 93 | Supply and fix in repairs PVC waste pipes of 40/32mm bore heavy duty type suitable for wash hand basins/sinks complete all as specified & directed. |
| 94 | Supply & fix in repairs sink with drain board made of stainless steel 0.80mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 95 | Dismantling cast iron work/mild steel work of any description complete all as specified and directed. |
| 96 | S & F in repair of PVC (SWR) floor traps with CP grating including jointing to waste pipe 100 mm bore outlet with solvent cement complete all as specified and directed.Traps `P' or `S' |
| 97 | S & F in repair of PVC (SWR) bends 100 mm bore with or without oval excess door complete all as specified and directed. |
| 98 | S & F in repair of PVC (SWR) cowls of bore 100 mm dia complete all as specified and directed. |
| 99 | S & F in repair of PVC (SWR) of bore 100 mm dia spun pipes, in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified & directed |
| 100 | All as described item Sr No. 99 here-in-before above but fixed in wall complete all as specified & directed |
| 101 | S & F of traps for WC any type `P' or `S' complete all as specified and Directed. |
| 102 | M&L for framed work such as grills gratings etc with ends of bars shouldered and/or riveted or forged into spikes ,framed guard bars ,barred iron doors ,ladders ,framed blasters ,walk ways railings framework of water tanks and similar work confirming to Fe-290,Gde-E-165 complete all as specified & directed |
| 103 | S&F for steel work as in tubular truss incl special shaped washer etc complete using erw or induction butt weld ed tubes confirming to IS 1161-1979 Gde St-240,including gusset plate pole etc complete all as specified & directed |
| 104 | S&F framed work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming Fe-410 Gde E-250 fixed complete all as specified and directed. |
| 105 | Fixing and errection only steel work as in tubular truss and likeetc complete using erw or induction butt welded tubes angles etc complete all as specified and directed . |
| 106 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of New steel surface complete all as specified & directed |
| 107 | Dismantling Plain or corrugated steel /AC sheeting or an6y other type of sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 108 | S& F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws in single length complete all as specified and as directed. |
| 109 | S& F for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 110 | S&F for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc and fixed with L or J type hook or cranked hook bolt complete all as specified and as directed. |
| 111 | S&F for AC two pieces adjustable plain wing ridge 6mm thick fixed with J type bolts etc complete all as specified and as directed. |
| 112 | M & L for providing & Applying Alkaline rust converting primer APCOREP RUSTREM in two coats conforming to ASTM -B-117 & ASTM -G-60-86 to exposed existing rebars after removing & cleaning loose rust by wire brush and leave it for 6-8 Hours.the rust converter shall have a minimum PH of 7.5 and shall be able to convert both hematite and magnetite forms of rust shall pass 400 alternate immersion cycles in 3.5 % Nacl complete all as specified and directed. |
| 113 | M & L for providing and applying anti corrosive coating APCOREP RUSTCOAT RB (CSIR/CBRI 's know how) in 2 coats with time interval of minimum 6 hours. The coating shall have Ecorr value of 45 mV against SCE in 3.5 NaCL for 100 hours and electrochemical evaluation of max 0.5 mA/sqcm.this coating shall be applied over APCOREP RUSTREM coated rebars complete all as specified and directed.. |
| 114 | M & L for applying stirrer mixed acrylic polymer of approved make @ 2 % of weight of cementused modified cement slurry made with non shrink compound in concrete /RCC work complete all as specified and directed. |
| 115 | M& L for applying stirrer mixed SBR (polymer of approved make) modified cement slurry made with shrinkage compensating cement in concrete/RCC work complete all as specified and directed. |
| 116 | M & L for providing ,mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and directionof Engineer -In-charge complete in all respect as following:-SBR polymer (@ 10% of cement weight) modified cementations bond coat @ 2.2 Kg Cement per Sqm of surface area mixed with specified proportion of approved polymer complete all as specified and directed. |
| 117 | M & L for providing and repairing the damaged concrete portion/surface preparation with single componenet ready to use,repair mortar SMARTCARE REPAIR MORTAR capable of applying 20 mm avg thick in single layer initially by hand and finishing with trowel,carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed. |
| 118 | M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and including cutting/ uprooting trees/ wild grass complete then washing the surface with Bleaching powder solution for treatment of fungal and applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and as directed at site by Engineer-in-Charge.Note:- (i) The old plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint the cost of all material. T&P and labour required for preparation of surface are deemed to be included in the rate quoted. OBD work shall to be paid under item No 09(ii) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed. |
| 119 | M&L for 1 coat of primer applied @ 0.90 litre/ 10 sqm using spray machine complete all as specified and directed. |
| 120 | M&L for Two coat of OBD using spray machine complete all as specified and directed |
| 121 | M&L for one coat of OBD complete all as specified and directed |
| 122 | M&L for preparation of old decorated surface of exterior/Interior wall/Ceiling of projection/chajja by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and including cutting/ uprooting trees/ wild grass complete then washing the surface with Bleaching powder solution for treatment of fungal and applying 1 mm thick white cement base wall care putty to obtain smooth finishes complete all as specified and as directed at site by Engineer-in-Charge & incl applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja. , of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Note:- (i) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee for a minimum period of 04 years by the contractor. The authorised applicator of manufacture shall be got approved from GE before commencement of work. (ii) All the material to be incorporated on the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iii) After carrying out preparation of surface the same shall be got approved from GE before application of primer and paint for each building.(iv) The colour/shade will be all as approved by GE.(v) The cost of scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed. The work shall be executed at a height from ground floor up to 15m (max).(vi) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer-in-Charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.(vii) The application of acrylic paint/ weather coat shall be with fully automatic airless spray machine with a flow speed of min 1 litre per minutes having pressure of 3300 PSI by allowing 6 to 8 hrs to dry the surface before painting of subsequent coat. However, where it is not possible to apply acrylic paint by using the spray machine the work will be carried out manually by using roller. |
| 123 | M&L for two coat of acrylic smooth two or more coat applied @ 1.67 ltr/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using using spray machine for painting complete all as specified and directed. |
| 124 | M&L for one coat of acrylic smooth coat applied @ 1.67 ltr/ 10 sqm over using roller for painting complete all as specified and directed. |
| 125 | M&L for preparation of Old surfaces and apply two coat of cement base paint to walls complete all as specified & directed |
| 126 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge. |
| 127 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in soil complete all as specified and directed by Engineer-in-Charge. |
| 128 | Removal of excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 129 | Dismantling of cast iron ,PVC or reinforced concrete drain pipes, 100 mm dia, jointed in cement mortar and taking out of trenches, if required, Complete all as specified and directed by Engr-in-charge. |
| 130 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge |
| 131 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge |
| 132 | M&L 150 mm bore Salt-glazed stone ware drain pipes crushing strength of less than 16KN/m laid in trenches and jointed complete all as specified & directed |
| 133 | M&L 200 mm bore Salt-glazed stone ware drain pipes crushing strength of less than 16KN/m laid in trenches and jointed and specified |
| 134 | M&L Ultra P E,DWC (Double wall corrugated) pipe confirming IS-16098 Part-2 2013 pertaining structure wall plastics pinning system for sewage 150/200MM and above bore pipe SN8 and all necessary fittings and fixtures complete all as specified and directed. |
| 135 | Demolition of cement concrete as in bed to drain pipe including packing under and haunching against the sides of pipe or as in manhole benching/bed etc complete all as specified and directed by Engineer-in-Charge. |
| 136 | M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm bore pipes complete all as specified and directed by Engineer-in-Charge. |
| 137 | M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 200 mm bore pipes complete all as specified and directed by Engineer-in-Charge. |
| 138 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required. Internal dia of pipe 150mm complete all as specified and directed by Engineer-in-Charge. |
| 139 | M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in benching /coping and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 140 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above gound level) complete all as specified and directed by Engineer-in-Charge |
| 141 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 142 | Cleaning of underground Horizontal sewage pipe of any dia upto 200mm (Cleaning length n.exc 30m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material/sludge to a distance of n.exc 300m and burrying in a pit and replacing manhole cover in position after cleaning complete all as specified and directed by Engineer-in-Charge |
| 143 | To attend and rectify sewage complaint such as blockage of chocked bathroom / WC / kitchen block / WHB drainage / chamber and also tightening of loose rain water pipe and outlet PVC pipe and making functional open drainage main hole sewage line etc complete all as specified and directed and directed any type any time between 9AM to 6PM including holiday all as specified and directed.Note : (1. )Only experienced 04 Nos sewage cleaners should be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (2.) Contractor or his representative collect the complaints at 0830hrs from complaint cell of AGE B/R-I and teh complaints will be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a panelty of Rs 250/- per day per complaints will be charged. |
| 144 | Dewatering of Septic tank soakage well and manhole of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol and washing the top of septic tank & soakage wells and surrounds with fresh water and sprinkling lime to make hygeinic complete all as specified and directed by Engr - in Charge. |
| 145 | De-sludging of septic tank of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filterbeds of any description and in anmy position by pumping out and removing of sludge outside Military/ Defence land by mechanical means (trolly mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spearding required qty of bleaching powder or dispose of waste material complete as per state protocol, including taking down of slab cover and placing the same in existing postion complete all as specified and directed by Engineer-in-Charge. |
| 146 | S & F stack clamp out of 50mm by 5mm flat iron & 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 110mm nominal bore pipe complete all as specified and directed. |
| 147 | S & F stack clamp out of 50mm by 5mm flat iron & 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm nominal bore pipe complete all as specified and directed. |
| 148 | S & F 75mm bore PVC (SWR) bends of any radius, c complete all as specified & directed |
| 149 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified & directed |
| 150 | S & F PVC 110mm bore (SWR) branch piece, single (single Y) equal or unequal, complete all as specified & directed |
| 151 | S&F CI Access door cover for 75mm bore pipe incl all asseseries complete all as specified and directed by Engineer-in-Charge. |
| 152 | S&F CI Access door cover for 100mm bore pipe incl all asseseries complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
