|
| 1 | M&L Raking out joints/pointing to brick or brick tiles, laid flat, in floors, surface channels, roofs, etc and including flush pointing to brick tile laid flat or brick tiles in pavings in cleaning and joints grouted flush in cement mortar 1:3 mixed with 5% cruide oil by weight of cement, complete all as directed and specified. |
| 2 | S&F in repair vitreous pedestal pattern (European type) water closet pan white with cast iron \\"P\\" or 'S\\" trap 100mm including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe including provn of jet complete all as specified and as directed. |
| 3 | S&F in repair vitreous One peice (European type) water closet pan white with cast iron \\"P\\" or 'S\\" trap 220mm including provn of fixing bolt and plastic seat cover heavy duty with hinging device including provn of jet complete all as specified and as directed. |
| 4 | S&F in repair Vitreous China urinals, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including Urinal spreader of PTMT any colour forfixing with 15 mm dia pipe. (Minimum weight 60gms) including PVC Connection 15mm size 450mm length complete all as specified and as directed. |
| 5 | S&F in repairs Vitreous China wash hand basin, white, flat back, size 550X400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 6 | S&F 32mm dia and 90 cm long PVC waste pipe complete all as specified and directed. |
| 7 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 8 | S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 9 | S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 10 | S&F in repairs brass face internal fittings for bib tap and pillar tap. Complete all as specified and directed |
| 11 | S&F in repairs brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed. |
| 12 | S&F in repairs 600mm long tubular towel rails 20mm dia, D type between flanges of brass chromium plated complete all as specified and directed. |
| 13 | S&F in repairs 15mm bore dia long shank and cup ( concealed type ) Stop valve/angle valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed. |
| 14 | S&F in repairs 100 mm dia CP grating round with hole / without hole size as per site rquiremet complete all as specified and directed. |
| 15 | S&F CP brass 2-in-1 center Hole Basin Mixer with connection pipe and fittings complete all as specified and as directed. |
| 16 | S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. |
| 17 | S&F in repair sheet glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed . |
| 18 | S&F in repair sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. |
| 19 | S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed. |
| 20 | S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed. |
| 21 | S&F in repairs 15mm bore dia long body bib tap of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) complete all as specified and directed |
| 22 | S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom, cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 23 | S&F in repairs water tank lid for 500 ltr capacity complete all as specified and directed. |
| 24 | S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. Complete all as specified and directed. |
| 25 | S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. Complete all as specified and directed. |
| 26 | Disconnecting exsiting water storage tanks of capacity exc 250ltr and n exc 500 ltr, removal of unusable tank from site complete all as specified and directed. |
| 27 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed. |
| 28 | Disconnecting exsiting water storage tanks of capacity exc 500ltr and n exc 1000 ltr, removal of unusable tank from site complete all as specified and directed. |
| 29 | S&F 1000 ltrs capacity rotational molded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed. |
| 30 | S&F in repairs stainless steel sink of thickness of sheet not less than 0.8mm for kitchen or loboaratory with plug, washer and wastes, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed. |
| 31 | S&F in repair stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm complete all as specificed and directed. |
| 32 | S&F in repair 15mm bore dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed complete all as specified and directed. |
| 33 | S&F 32mm dia CP waste coupling and 32mm dia flexible waste pipe 1.20 m long suitable for wash hand basin and sink complete all as specified and directed. |
| 34 | S&F in repair 15mm bore dia bib taps chromium plated cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed. |
| 35 | S&F in repair 600x450mm frameless bevelled edge of 5 mm thick selected quality glass for wall and fixed with wooden plugs and 04 Nos CP brass screw and cup washer complete all as specified and directed |
| 36 | S&F in repairs 25mm dia stainless steel curtain rods with stainless steel brackets (for 1m - 2 brackets including fancy type funeral (Lattu)) complete all as specified and directed by engineer in charge. |
| 37 | Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning the serviceable tubing for refixing, cutting/chasing and making good in CM 1:3 in wall/floor complete all as specified and directed. |
| 38 | S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified. |
| 39 | Taking up or down 20mm bore of galvanised Iron steel tubing and connections including cleaning the serviceable tubing for refixing, cutting/chasing and making good in CM 1:3 in wall/floor complete all as specified and directed. |
| 40 | S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified. |
| 41 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), with all fittings viz. heads, shoes, bends, swan-necks etc, removal rubbish beyond MOD land complete all as specified and directed. |
| 42 | All as per item 41 but 75mm bore , complete all as specified and directed. |
| 43 | S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 44 | All as per item 43 but 75mm bore ,complete all as specified and directed. |
| 45 | S&F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors including demolition of old pipecomplete all as specified and directed |
| 46 | All as per item 45 but 75mm bore , complete all as specified and directed. |
| 47 | S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed. |
| 48 | All as per item 47 but 100mm bore ,complete all as specified and directed. |
| 49 | S&F CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed. |
| 50 | S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed. |
| 51 | All as per item No 50 above but 75mm bore.complete all as specified and directed. |
| 52 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed. |
| 53 | M&L for brick work with sub class 'B' old size, burnt brick straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 54 | All as per srl item No 53 above but except brick. complete all as specified and directed. |
| 55 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 56 | M&L for 15mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. |
| 57 | M&L for 10mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc and applying two coats of Oil Bound Distemper complete all as specified and directed. |
| 58 | M&L for 5mm thick rendering of ready mix plaster of approved make on soffit of Rcc slab/ceiling/beams, finish the surface even and smooth without using extra cement as whole or in patch etc and applying three coat of white wash complete all as specified and directed. |
| 59 | M&L for applying wall care putty 1mm thick on ceiling even and fair surface complete all as specified and directed. |
| 60 | M&L for preparation of new surfaces of wall and applying two coat of of cement base paint over and including a coat of priming plastered and other surfaces with alkaki resistant priming paint complete all as specified and as directed. |
| 61 | M&L for Preparation of existing surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed. |
| 62 | Dismantling of Loose concrete cover from celing surface/chajja (including staicase ceiling) are exc 1.50 sqm including derusting of steel reinforcement,(reinforcing the reinforcement by providing TMT steel bar of required dia welded to the existing reinforcement) preparing the surface by cleaning dirt etc, applying chemical admixture over reinforcement,provided chicken wire mesh (before applying first layer). Apply a rendering coat of cement plaster upto surface of existing thickness of concrete in CM 1:3 and second layer 10mm thick rendering in CM 1:3, three coats of whitewash to match with existing surface complete all as specified and directed.Note : Rate quoted shall be inclusive of all scaffolding, props and shuttering, chicken wire mesh, steel reinforcement, chemical admixture and other T&P etc. |
| 63 | M&L preparation of old decorated plastered surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls complete all as specified & directed. |
| 64 | M&L for preparation of old decorated plastered surfaces of walls etc by complete removal of existing treatment including washing, rubbing down and stopping of surface and applying two coats of oil emulsion distemper over and including a coat of primer on wall surfaces complete all as specified and dircted. |
| 65 | M&L preparation old plastered surfaces of ceiling and applying two coats of white wash all as specified and directed. |
| 66 | M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed. |
| 67 | M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 68 | S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) including necessary beading and welding whereever required complete all as specified & directed. |
| 69 | M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm,300X600mm and 450X600 mm 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and as directed. |
| 70 | M&L Non skid ceramic coloured joint free tiles 600mm x 600mm, 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing)removing of rubbish beyond MOD land complete all as specified and directed. |
| 71 | All as per item 70.00 here-in-before but size 400mm x 400mm, 6 to 7mm thick. complete all as specified and directed. |
| 72 | M&L for 18 mm thick 100% Solid WPC (Wood Polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed. |
| 73 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as per specified and directed. |
| 74 | S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. |
| 75 | S & F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. |
| 76 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as dierected. |
| 77 | S & F of chrome plated telescopic channel size 450mmx20mmx1.5mm with necessary fixing clips etc. complete all as per specified and directed. |
| 78 | S &F in repair aluminium door seal having Rubber strips (size 0.80m TO 1.2 m and 50mm wide) complete all as specified and directed. |
| 79 | Demolition of reinforced cement concrete as in Chajja, RCC parapet, Kitchen slab, Chullah hood, chimney portion and similar work concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 80 | M&L Formwork to soffits of suspended slabs such as kitchen slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concerete all as specified and directed. |
| 81 | M&L for reinforced cement concrete Nominal Mix using type B-1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items) |
| 82 | M&L for mild steel TMT bars upto 10mm dia and over cut to length,bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 83 | Demolition of stone slabs and tiles of any description or thickness in floors aprons laid dry or laid dry and pointed in any mortar, complete all as specified and directed. |
| 84 | M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 85 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed. |
| 86 | Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed. |
| 87 | M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed. |
| 88 | M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 89 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of old paver block complete all as specified and as directed. |
| 90 | M&L for Coloured Machine pressed cement concrete chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment over and including 20mm thick screed bed in cement mortar 1:6 including demolition of old tile complete all as specified and as directed. |
| 91 | M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggre) as in bed blocks for gola, hold fast, roof padding/flooring, coping bedding rounded or chamfered and similar work etc., complete all as specified and directed. |
| 92 | Dismantling of asbestos cement (corrugated semi corrugated sheet & ridge in roof) covering complete all as specified and directed. |
| 93 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, wall & gates complete all as specified and directed. |
| 94 | M & L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet o.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified.complete all as specified and directed. |
| 95 | M & L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet o.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 96 | M&L for fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugation side lap fixed with coach screws and washer in roof, wall etc complete all as specified and directed. |
| 97 | Dismantling structural steel work as in rafter and purlin including doors, gates and similar items etc complete all as specified and directed. |
| 98 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and as directed. |
| 99 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as direcetd. |
| 100 | All as per item No 99.00 here-in-before but except steel. complete all as specified and directed. |
| 101 | M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 102 | M&L for false ceiling with 600mmx600mmx4mm thick 'E' board classic of M/S Eternit Everest Ltd or Charminar make as approved by GE, fixed with and including galvanized iron powder coated inverted 'Tee\\" or 'L' sections (concealed GI/aluminium frame work) of 'Cicage' metallic or equivalent suspended from ceiling with provision of galvanized iron wire 45 mm dia and self tapping screws including butterfly clips, hold down clips for fixing the boards to frame complete all as pe manufacturer's instructions and all as directed including demolition of old ceiling.(a) Size of Main Tee- 39x24.7x0.8mm(b) Size of Cross Tee- 29x24.7x0.8mm(c) Size of wall angle - 22.2x22.2x0.65mm(d) Butter fly clip(e) Hold down clip(f) Size of grid 1.22mx0.61m |
| 103 | Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed. |
| 104 | All as per item 103 but exc 1.50 sqm but not exc 4.00 sqm each.complete all as specified and directed. |
| 105 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed. |
| 106 | Taking down Shutters of any description exc 2 sq. m each complete all as specified and as directed. |
| 107 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steelpeg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 108 | All as per item 107 but without glazing bars. complete all as specified and directed. |
| 109 | S&F 3 mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed. |
| 110 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete all as specified and as directed. |
| 111 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 112 | S&F 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed to frame as in shutters to cup boards etc including 18/19 x 4mm leeping/ beading all round shutters complete all as specified and as directed. |
| 113 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 114 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 115 | M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick section, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. Cost of glass and wire cloth included herein complete all as specified and directed.) |
| 116 | M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50mm with square tube solid 6mm thick including aluminium channel of suitable size thickness of channel 1.5mm complete all as specified and directed at site. |
| 117 | S&F Aluminium door single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, shutter with bottom & middle rail of section 112.50x 37x1.5mm thick and styles & top rail of section 83x37x1.5mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5mm thick frosted glass including necessary fittings, fixtures & aluminium snap beads, complete all as specified and directed. |
| 118 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and adirected. |
| 119 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded etc. with suitable PVC sheet beading including hinges etc complete all as specified and directed. |
| 120 | M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed. |
| 121 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, comercial type on both sides complete all as specified and directed. |
| 122 | S&F 30mm thick plain framed panelled shutters (any number of panels) with lock rails in IInd class HW and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces, supplied and fitted to chowkhat complete all as specified and directed. |
| 123 | S&F 30 mm thick glazed and skelton shutter IInd class hard wood rebated and prepared to received glass, gauge etc (with sash bars) edges of forming plain, chamfered or rounded fitted with mitred beads for securing glass etc complete all as specified and directed. |
| 124 | M&L for preparation of new steel surfaces, painting two coats of synthetic enamel paints over and including a coat of red oxide primer exc 10mm width or girth complete all as specified and directed. |
| 125 | M&L for preparation of new wooden surfaces, painting two coats of synthetic enamel paints over and including a coat of pink primer exc 10mm width or girth complete all as specified and directed. |
| 126 | S&F 100mm long butt hinges medium weight cold rolled MS welded to pressed steel/angle iron frames complete all as specified and directed. |
| 127 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 128 | S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed. |
| 129 | S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 130 | S & F for 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing including 5 mm thick PVC sheet fillet of width 35 mm thick wall paneling incl of fixing on to shelter make PVC frame at site incl necessary fillets fixed etc including demolition of old wall paneling complete all as specified and as directed. |
| 131 | Providing and fixing factory made Fiber glass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment) complete all as specified and as directed. |
| 132 | S&F Aluminium Partition single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, ACP panel shutter with bottom & top rail of section with rebate including jointing cleats, fixing of builders hardware fittings, necessary middle portion glazing with 5mm thick tinted/froasted/plain glass including necessary fittings, fixtures & aluminium snap beads, including demolition of old partition complete all as specified and directed. Please Enable Macros to View BoQ information |
