|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) including removal of debris to out side Mil Stn complete all as specified and directed. |
| 2 | Demolition of cement concrete un-reinforced any description in any position including removal of debris to out side Mil Stn complete all as specified and directed. |
| 3 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 4 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc including removal of debris to out side Mil Stn complete all as specified and directed. |
| 5 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and including removal of debris to out side Mil Stn complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removal of debris to out side Mil Stn complete all as specified and directed. |
| 7 | Racking out cement joints/pointing to squared rubble coursed masonry or uncoursed masonry work built in cement mortar complete all as specified and directed. |
| 8 | Taking down chowkhats or frames & removing from site area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 9 | Taking down chowkhats or frames & removing from site area exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 10 | Taking down shutter of any description & removing from site area not exc. 1 sqm complete all as specified and directed. |
| 11 | Taking down shutter of any description & removing from site area exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 12 | Dismantling plain or corrugated steel sheeting any gauge, thickness in roofs complete all as specified and directed. |
| 13 | Dismantling of wall & ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets. complete all as specified and directed. |
| 14 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 15 | Taking up or down 15 mm bore steel tubing and connections including complete all as specified. complete all as specified and directed. |
| 16 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 17 | Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr complete all as specified and directed. |
| 18 | Dismantling PVC water tank of capacity Exc 500 Litre and not Exceeding 1000 Ltr complete all as specified and directed. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 20 | S&F of 3mm thick sheet glass ordinary quality and glazing type, n.e.c. 0.5 sqm in each pane, duly fixed with oil putty or wooden beading as required incl hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete orbrick surround, glazed with putty or fixed with beads, complete all as specified and directed. |
| 21 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 22 | M & L for 15mm thick rendering in CM 1:4 on other than fair faces of brick masonry, stone masonry or concrete surfaces, mixed with water proofing liquid @ 2% by weight of cement and finished even and smooth without using extra cement upto 10m bldg ht (Note :- Water Proofing shall be measured and paid separately) complete all as specified and directed. |
| 23 | Supply only intergal Water Proofing complete all as specified and directed. |
| 24 | M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.50mm graded stone aaggregate) in floor finished without even and smooth using extra cement complete all as specified and directed. |
| 25 | M&L for 40mm thick cement concrete 1:3:6 type B1 (using 20mm graded stone aaggregate) in floor finished without even and smooth using extra cement complete all as specified and directed. |
| 26 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection/ path/ hardstanding, laid in panels complete all as specified and directed. |
| 27 | M & L for 75mm thick Cement concrete 1:4:8 type D2 as in sub base complete all as specified and directed. |
| 28 | M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM 1:4, complete all as specified and directed. |
| 29 | M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 30 | All as per Sr item No 29.00 above but except bricks. complete all as specified and directed. |
| 31 | M&L for walling of random rubble, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed. |
| 32 | All as per Sr item No 31.00 above but except stone. complete all as specified and directed. |
| 33 | M&L for cement concerte 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in cills, steps, seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, bond stones etc. including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed. |
| 34 | Aluminium anodised snap grid frame work of size of size 605 mm X 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/ instructions), cutting holes for electrical fittings fixed on and including aluminium tee of size 25mmX25mmX1.50 mm as main runner, aluminium tee of size 25mmX25mmX1.25 mm as cross runner and aluminium angle of size 25mmX25mmX1.25mm at the perimeter suspended from soffit at approx 900 mm centre to centre with hangers 6 mm dia galvanised (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanised iron flat 40 mm X 3 mm size, 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including 4mm thick non-asbestos fibre cement board ISI marked Eboard decorative type complete all as specified and directed. |
| 35 | M & L for second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed. |
| 36 | M & L in repair 2nd class hard wood wood plain fillets rectangular or square in sectional clean swan secured with nails sectional area exc 03 and n.exc 06 sqcm complete all as specified and directed. |
| 37 | S & F of 2nd class hard wood scantling, clean sawn in any position and any description as in framed or unframed work including dismantling the old one complete all as specified and directed. |
| 38 | S&F hollow wall panelling made of high quality PVC panels of approved make design and shade having min uniform thickness of 5mm with tongue and groove interlocking system fixed as per manufacture instructions, incl cover fillets as reqd, and preparation of surface complete all as specified and directed. |
| 39 | M&L raised pointing to squared rubble stone masonry,un-courses or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 40 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600x600), in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, incl 15 mm screed bed in CM 1:6, complete all as specified and directed. |
| 41 | All as per item No-40.00 above but as vertical surfaces such as in skirting etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, incl rendering 10 mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed. |
| 42 | M & L vitrified ceramic tiles light shade 7-8 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm (600x600) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15 mm thick screed bed CM (1:6) layer set and jointed in neat cement slurry and pointed pointed pointed complete all as specified and directed. |
| 43 | All as per item No-42.00 above but as vertical surfaces such as skirtings, dados and risers to steps etc over 10 mm thick rendering bed CM (1:4) layer set and jointed in neat cement slurry and pointed in coloured cement to match with the shade complete all as specified and directed. |
| 44 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm(400x400), as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, incl 15 mm screed bed in CM 1:6, complete all as specified and directed. |
| 45 | M&L for glazed coloured ceramic tiles of size 300mm x 200mm x 7mm/450X 300X 7 mm thick thickness in vertical surfaces over 10 mm thick rendering bed CM (1:4) layer set and jointed in neat cement slurry and pointed in coloured cement to match with the shade complete all as specified and directed. |
| 46 | M & L 16-18 mm thick granite slab/tiles (of any type table rubbed and polished) in steps jambs pillars, window cills, cooking platforms and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match floor finishes with incl rounding to stone of one edge complete all as specified and directed. |
| 47 | M&L for machine cut Kota stone slab flooring 16-18 mm thick over cement screed bed laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including and polishing complete over and including 15 mm screed in cement mortar 1: 6 complete all as specified and directed. |
| 48 | M&L for machine cut Kota stone slab flooring 16-18 mm thick riser of step, skirting, dado and piller laid over and including 10 mm thick rendering in 1:4 on fair faces of brick work or concrete surfaces finishing rough for receiving wall tiles complete all as specified and directed. |
| 49 | M&L for Chequered cement concrete tiles 25x25x20-25mm / 30cmX30cmX20-25mm thick, with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 50 | S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing all as specified and directed. complete all as specified and directed. |
| 51 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed. |
| 52 | Making good dismantled portion for inserting hold fasts in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. |
| 53 | M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 54 | S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast incl PCC 1:3:6 type C-0 using 12.5mm graded stone agg for back filling of frame, etc. complete all as specified and directed. |
| 55 | S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast incl PCC 1:3:6 type C-0 using 12.5mm graded stone agg for back filling of frame, etc. complete all as specified and directed. |
| 56 | S&F for 35mm thick 2nd class hard wood factory made framed, panelled shutter any number of panel with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed. |
| 57 | S & F of 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part - I (Specifications) complete all as specified and directed. |
| 58 | M&L. 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain any numbers, complete all as specified and directed. |
| 59 | S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter)wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytabled at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 60 | S&F anodised aluminium window and ventilator shutters, powder coating of any colour (Thickness or powder coating not less than 50 micron) sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 61 | S&F powder coated aluminum frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. |
| 62 | S&F anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 63 | M & L for 2 to 3mm thick Aluminium composite panel coloured sheet complete all as specified and directed. |
| 64 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 65 | S&F 4mm thick sheet glass, frosted on one side, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 66 | S&F brass 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 67 | S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples. complete all as specified and directed. |
| 68 | S & F in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 69 | S & F in repair 300mm dia ordinary rat tail rod pattern springs of mild steel including roller and roller plate for skeleton door shutters. complete all as specified and directed. |
| 70 | S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 71 | S & F of 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 72 | S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 73 | S & F of 75 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 74 | S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 75 | S & F of 100 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 76 | S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 77 | S & F of 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type hooks or cranked hook bolts and washers in roof, walls etc. with grade of zinc coating 120 gm/sqm complete all as specified and directed. |
| 78 | All as per item No 77.00 above but except sheets. complete all as specified and directed. |
| 79 | S & F of 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 gm/sqm, fixed in any pattern complete all as specified and directed. |
| 80 | All as per item No 79.00 above but except sheets. complete all as specified and directed. |
| 81 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 82 | All as per item No 81.00 above but except sheets. complete all as specified and directed. |
| 83 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 84 | All as per item No 83.00 above but except sheets. complete all as specified and directed. |
| 85 | S&F for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified and directed. |
| 86 | M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil, complete all as specified and directed. |
| 87 | S&F chicken wire netting 25 gauge, 20mm size of mesh, fixed with tinned tacks wire staples complete all as specified and directed. |
| 88 | S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified and directed. |
| 89 | Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaning complete all as specified and directed. |
| 90 | Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) after cleaning complete all as specified and directed. |
| 91 | S&F rotational moulded polyethylene three layered water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float ball valve 20mm dia with PTMT polythene float and fly nut, tank nipples with check nuts and washers complete and making connections complete all as specified and directed. |
| 92 | S&F rotational moulded polyethylene three layered water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float ball valve 20mm dia with PTMT polythene float and fly nut, tank nipples with check nuts and washers complete and making connections complete all as specified and directed. |
| 93 | S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 94 | S & F mild steel columns, purlins, truss ties, wind ties, hooks for hanging fans tee, angle, channel or flat sections) including distance pieces, cleats etc. ade Fe 269-W (Grade E-165) complete all as specified and directed. |
| 95 | S & F of flat iron bands, straps, supports, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | S & F of flat iron bands, straps, supports, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed. Please Enable Macros to View BoQ information |
