|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n. exc. 4 sqm complete all as specified and as directed. |
| 2 | Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each complete all as specified and as directed. |
| 3 | S&F pressed steel frames of size 125x60mm, made out of 1.25mm thick steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock, strike plate, etc. complete all as specified and as directed. |
| 4 | S&F pressed steel frames of size 105x60mm, made out of 1.25mm thick steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock, strike plate, etc. complete all as specified and as directed. |
| 5 | S&F pressed steel frames of size 75x50mm, made out of 1.25mm thick steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock, strike plate, etc. complete all as specified and as directed. |
| 6 | S&F 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed |
| 7 | S&F flat iron of size 25x6mm as in hold fast including tarring or coal tar black paint confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed. |
| 8 | M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in filling of pressed steel chowkhat complete all as specified and as directed |
| 9 | Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as required depth of embedded portion of holdfasts, exc. half brick thick and not exc. one brick complete all as specified and as directed |
| 10 | S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled shutter (2 panels) with lock rail and panel of commercial ply or 12mm veneered particle board with 9mm B.W.P commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 11 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); and fitted to chowkats complete all as specified and as directed. |
| 12 | S&F 30mm thick flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides with application of decorative laminate of approved colour and pattern complete all as specified and as directed. |
| 13 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sqm complete all as specified and as directed. |
| 14 | Taking down shutters of any description n. exc. 1.0 sqm complete all as specified and as directed. |
| 15 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specifications & drawing shown in SSR Part-II as approved complete all as specified and as directed. |
| 16 | S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specifications and drawing complete all as specified and as directed. |
| 17 | S&F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a); and fitted to chowkats complete all as specified and as directed. |
| 18 | S&F 30mm thick factory made 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: and fitted to chowkats complete all as specified and as directed. |
| 19 | S&F steel windows with side hung shutters with box type hinges shutters with steel handle and steel peg stay without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 20 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 21 | S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, 'L' or 'T' section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 22 | S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed. |
| 23 | Hacking out old broken glass (any thickness, size, qulaity or description) as in metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 24 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 25 | S&F 4mm thick figured glass, pin headed type, glazing with oil putty in squares n exc 0.5 sqm each pane complete all as specified and as directed. |
| 26 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/windows complete all as specified and as directed. |
| 27 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. |
| 28 | M&L for preparation of new steel surfaces of any description over exc 10cm girth or width and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed. |
| 29 | S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in door/windows of any description complete all as specified and as directed. |
| 30 | S&F 125mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 31 | S&F 75mm long butt hinges with stainless steel hinges of type C-21 complete all as specified and as directed. |
| 32 | S&F 125mm size extruded aluminium alloy handles, cast type anodised including the screws complete all as specified and as directed. |
| 33 | S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 34 | S&F 100mm long butt hinges with stainless steel hinges of type B-21 complete all as specified and as directed. |
| 35 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 36 | S&F aluminium alloy handle of size 150mm, extruded, cast type anodised including the screws complete all as specified and as directed. |
| 37 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 38 | All as per Serial item No. 38 here-in-before but of size 250mm. |
| 39 | S&F for 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n. exc. 200 cu.cm each complete all as specified and as directed. |
| 40 | S&F 100mm long hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 41 | S&F as in repairs door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 42 | S&F as in repairs floor door stopper of 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 43 | Dismantling boarding of any description, fixed in any position with screws complete all as specified and as directed. |
| 44 | S&F 19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 45 | S&F 20mm thick 2nd class hard wood, clean sawn planed both sides boarding fixed in shelves, partitions and shelves, etc. built in cupboards, almirahs, book cases, tiolet boxes, racks, pelmets and similar work complete all as specified and as directed. |
| 46 | S&F 30mm width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 47 | Taking down cement or cement lime plaster from brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 48 | M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and as directed. |
| 49 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and as directed. |
| 50 | S&F as in repairs powder coated aluminuium anodised pipe 20mm dia as in curtain rod, fixed to brackets complete all as specified and as directed. |
| 51 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 52 | Dismantling timber scantling, 40sq.cm and over in section, in any position, in unframed work complete all as specified and as directed. |
| 53 | M&L for 2nd class hard wood timber scantlings clean sawn complete all as specified and as directed. |
| 54 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 55 | S&F for Gl frame work (size of grid 605x605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed. |
| 56 | M&L for 6mm perforated particle board/tiles for insulation and accoustic purposes, 60x60cm in size, fixed with screws to timber framework or with staples on snap grid complete all as specified and as directed. |
| 57 | Repairing shutters of any description but exc. 1.0 sqm but not exc. 2.0 sqm each and refixing in same opening complete all as specified and as directed. |
| 58 | Repairing shutters of any description but not exc. 1.0 sqm each and refixing in same opening complete all as specified and as directed.NOTE : The contract sum shall be derived by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
