|
| 1 | Demolition of RCC of any description and in any position not other wise specially provided for (reinforcement cut as required to faciliate demolition ) complete all as specified & directed. |
| 2 | Material and labour for reinforced cement concerete1:2:4, type B-1 (nominal mix) using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, columns, shelves and like complete all as specified and directed.Note:- Reinforcement shall be measured and paid for separately |
| 3 | Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. Where RCC/PCC band in walls, spanning and opening, for rough finished surface of concrete complete all as specified and directed. |
| 4 | Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface of concrete complete all as specified and directed. |
| 5 | Material and labour for mild steel TMT Bars 6 to 8 mm and above cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less than 0.90 mm dia or securing with chips complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floor and paving exc.15 cm thickness above ground level and removing the rubbish outside MoD land complete all as specified & directed. |
| 7 | Material and labour for 75mm thick PCC 1:3:6 type C-2 ( using 20mm graded aggregate) as in plinth protection laid in alternate bays, surface finished even & smooth without using extra cement including making joints complete all as specified and directed. |
| 8 | Material and labour for 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed. |
| 9 | Material and labour for 40mm thick PCC (1:2:4) type B-0 ( using 12.5mm graded aggregate) as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed. |
| 10 | Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish off the premises. |
| 11 | Supply and laying Glazed ceramic tiles in vertical surface 300x 200x 7 mm / 450X 300X 7mm thick, (Square/rectangular ) dark/printed in vertical surface area of each tile exceeding 0.13 sqm but not exceeding 0.18 sqm thick set & jointed in neat cement slurry and pointed with coloured cement to match, over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 12 | Material and labour for non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 complete all as specified and directed. |
| 13 | Material and labour for non-skid, ceramic, coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 10mm thick backing coat on fair faces of brick work or concrete surface in CM 1:4 complete all as specified and directed. |
| 14 | M&L for vitrified light shade ceramic tiles 8 to 9 mm thick polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as directed by Engineer-in-Charge. |
| 15 | M&L for vitrified light shade ceramic tiles 8 to 9 mm thick polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as directed by Engineer-in-Charge. |
| 16 | M &L for chequered cement concrete tiles glossy finished 30mm x 30mm x 22mm thick made by table vibratory method set, jointed and pointed in neat cement slurry as in floors with grey cement & pigment tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 complete all as specified and directed. |
| 17 | Dismantling of stone slab and tiles of any description or thickness in floors aprons etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 18 | Material and labour for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, landings, window gills cooking plat form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cm 1:6, and including rounding of edges of granite slabs 10 to 20 mm thick by grinding and rubbing and finished smooth, coloured as approved by Garrison Engineer complete all as specified and directed.Note: Front fascia edges of granite slabs shall be rounding and finished smooth. The contractor shall quote their rates considering the above element, no extra paid on this. |
| 19 | All as per description of serial Item No.18.00 here in before but as on vertical surfaces and over of including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 20 | M&L for sand cushion (Tibba Sand), filling under floors/tiles/paver blocks or in foundations including watering and consolidation complete all as specified and directed. |
| 21 | M&L for Vibrator finished rubber moulded concrete coloured interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed |
| 22 | M&L for Vibrator finished rubber moulded concrete coloured interlocking paver block of approved shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and no pigment, M-40 Grade of approved colour and design complete all as specified and directed |
| 23 | M&L for providing and laying at or near ground level factory made kurb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in- Charge |
| 24 | Demolition of brick or stone masonry built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed. |
| 25 | Material and labour for brick work with sub class -B bricks old size, straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified & directed. |
| 26 | Material and labour for brick work with sub class -B bricks old size, straight or curved in half brick thick wall built in CM 1:4 complete all as specified & directed. |
| 27 | Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc, Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this. |
| 28 | Material and labour for 15mm thick rendering on other than faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | Material and labour for 10mm thick rendering on concrete surface in cm 1:3 as in ceiling surface to be finished even and smooth without using extra cement complete all as specified and directed.. |
| 30 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | Material and labour for two coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed. |
| 32 | Preparing surface of new plastered surface and applying two coat of oil bound distemper emulsion over one coat of primer complete all as specified and directed. |
| 33 | Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 34 | Preparing surface of newly plastered surface and applying two coats of acrylic emulsion exterior paint over coat of primer, tint as approved by Garrison Engineer in camouflage pattern to match existing surface complete all as specified and directed. |
| 35 | M&L for precast cement concrete louvers and jallies, 40 mm thick (measured solid), including all moldings but excluding frame, type B-0 (1:2:4) using 12.5 mm graded stone aggregate, set in cement mortar 1:4 including taking down old RCC jallies, complete all as specified and directed. |
| 36 | M&L for precast cement concrete post, ornamental moulded, 75mm x 75mm in section, total length of each post exceeding 45cm but not exceeding 60cm, type B-0 (1:2:4) using 12.5 mm graded stone aggregate, with groves on two opposite sides for holding jalls 40mm thick, set in cement mortar 1:6 including taking down old concrete post complete all as specified and directed. |
| 37 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed section etc complete all as specified and directed. |
| 38 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 39 | M&L for MS work in Roof trusses (framed), trussed, purloins, crane gantries, rails, posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including special shaped washer etc. complete and including all necessary drilling or cutting holes in brick/ concrete surfaces and making good, welding work, bolting or reverting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed |
| 40 | S&F framed work as in doors or gate of angle or other section with gussets plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete of quality grade B. complete all as specified and directed. |
| 41 | Dismantling plain or corrugated steel sheeting any gauge/ thickness including Nainital pattern or similar pattern roof covering in patches complete all as specified & directed. |
| 42 | M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated or semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 43 | M & L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 44 | Dismantling of wall and ceiling boards (fiber, PVC, Pulp, insulation etc ) of any description, any thickness including frame / grid, fillets work etc complete all as specified and directed. |
| 45 | S&F ceiling snow Frost vinyl face, washable metalized polyester foil backing ,vinyl covered edges, suspended ceiling on suspension system. Panels shall be of Size 600 mm x 600 mm x 8 mm, having 7 kg/SQM, including providing Grid system for fixing ceiling tiles shall comprise of suspension system with true horizontal level, suspended on inter locking tegular “Select” system with 15mm black flanges incorporating a 4mm central reveal in black colour and a load carrying capacity of minimum 14.50 kg/m2 with birds mouth notches metal grid of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 15x32 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 15mmx25mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200mmx600 mm and secondary cross \\"T\\" of length 600 mm and size 15mmx25mm made of 0.30 m thick (minimum) sheet to be interlocked at middle of the 1200mmx600 mm panel to form grids of 600mmx600mm and wall angle of size 20mmx15mmx0.3 mm and laying false ceiling tiles of approved texture in the grid including, required fitting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85mm x 30mm x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 15 mm of all T-sections all complete for all heights as per specifications, drawings incl dismantling of old ceiling, complete all as specified and directed. |
| 46 | Repairing to de-railed sliding steel gate, over all size 24.80m x 8.40m having 06 leafs of size 4.10 m x 8.2 m each, for smooth functioning of gate by welding where required, dismantling, straightening and refixing in position damaged steel members, cutting and leveling bottom unleveled PCC stucking to steel members to steel rollers tightening / replacing of worn out nuts & bolts, welding and re adjusting / replacing top / bottom steel rollers, greasing to all movable parts complete all as specified and as directed.Note : (i) T&P required for taking down the door for repair and re-fixing the same shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No clam whatsoever on this account shall be entertained.(ii) Replacement of defective steel members, items shall be measured and paid as 'Supply only' against respective item of this schedule. |
| 47 | Repairing of rolling shutter, push type, size n.exc 6sqm each for smooth functioning by re-posting of laths, riveting to old defective rivets, tightening nuts and bolts, re-stretching of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter in position complete all as specified and directed.Note : (i) T&P required for taking down the door for repair and re-fixing the same shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No clam whatsoever on this account shall be entertained.(ii) Replacement of defective steel members, items shall be measured and paid as 'Supply only' against respective item of this schedule. |
| 48 | Repairing of rolling shutter, push type, size exc 6 sqm but n. exc 15 Sqm each for smooth functioning by re-posting of laths, riveting to old defective rivets, tightening nuts and bolts, re-stretching of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter in position complete all as specified and directed.Note : (i) T&P required for taking down the door for repair and re-fixing the same shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No clam whatsoever on this account shall be entertained.(ii) Replacement of defective steel members, items shall be measured and paid as 'Supply only' against respective item of this schedule. |
| 49 | Supply only mild steel plain sheet 1.00mm covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched all as specified and directed. |
| 50 | Supply only MS spring suitable for rolling shutter complete all as specified and directed. |
| 51 | Supply only MS ball bearing suitable for rolling shutter complete all as specified and directed. |
| 52 | Supply only mild steel section of any size or any section for guide channel of rolling shutters including necessary cutting & drilling holes as required and making good all as specified and directed. |
| 53 | S&F as in repairs rolling shutter gear operated type with bevel gear box and crank handle with 1.25 mm thick lath without ball bearing as specified including top cover anchoring rod, hasp and staple, side guide rail etc and erected in position built as indicated, including cutting holes in brick /rcc walls and making good complete all as specified and directed |
| 54 | S&F in repairs gear box for rolling shutter for load capacity 60 Kg to complete all as specified and directed by Engineer-in-Charge |
| 55 | Taking down of bird netting of hangers at height exc 6.0 meter but n exc 12 meter and refixing in the same position including necessary repair to netting complete all as specified and directed. |
| 56 | Supply and fixing as in repairs anti bird net at height exc 6.0 meter but n exc 12 meter , Square mesh size 20 mm x 20mm, Black / White HDPE knotted Net, thickness of the net 1.00mm, Weatherproof, U.V. stabilized and chemically inert, Breaking strength of 23.08 kg per yarn, Having a Melting point of 260°C fixed with boarder rope of dia 4mm, UV stabilized boarder rope jointed with the net by machine inter locking process using three twines of the same as that of net tied to 12mm dia Hooks (made to shape) or welded to steel structure and 12 mm dia anchor fastener bolt fixed to RCC structure as applicable at suitable intervals complete all as specified and directed. |
| 57 | Supply and fixing as in repairs anti bird net at height exc 6.0 metre but n exc 12 metre Square mesh size 20 mm x 20mm, Black / White HDPE knotted Net, thickness of the net 5.00mm, Weatherproof, U.V. stabilized and chemically inert, Breaking strength of 23.08 kg per yarn, Having a Melting point of 260°C fixed with boarder rope of dia 4mm, UV stabilized boarder rope jointed with the net by machine inter locking process using three twines of the same as that of net tied to 12mm dia Hooks (made to shape) or welded to steel structure and 12 mm dia anchor fastener bolt fixed to RCC structure as applicable at suitable intervals complete all as specified and directed. |
| 58 | Taking down aluminum shutter / sliding door for necessary repair work and re-fixing in position after necessary repair work such as setting of floor spring, pivot adjusting etc incl necessary fixing of screws etc for proper function of aluminum door of size n exc 1.5 sqm each complete all as specified and directed. |
| 59 | S&F as in repairs door closer hydraulically regulated cast iron body, designation No 2, universal type, suitable for door shutters of size 701 to 850 mm in width and of weight between 36 to 60 Kg, complete all as specified and directed. |
| 60 | S & F as in repairs mild steel mortise lock vertical type 100mm, 4 levers all as specified complete all as specified and directed. |
| 61 | S & F as in repairs aluminum grill of size, 85mm x 85mm hexagonal shaped mesh, fixed to aluminum frame work with 'U' clip of size 15mmx12mm & fasteners complete all as specified and directed. |
| 62 | Supply and fixing in repairs Powder coated aluminum (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge |
| 63 | Providing and fixing in repairs Powder coated aluminum (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, rollers & dust proof brush for sliding door / window complete all as per the directions of Engineer-in-Charge. |
| 64 | S & F double action floor door spring hydraulically regulated made up minimum 1.25 thick aluminum alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 65 | S & F as in repair double action floor door spring hydraulically regulated made up minimum 1.25 thick aluminum alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 66 | S & F as in repair top pivot of casting body suitable for aluminum door complete all as specified and directed. |
| 67 | Supply and fixing 170 to 200 mm size extruded aluminum alloy handles fabricated fancy type, anodized fixed with stainless steel screws complete all as specified and directed. |
| 68 | S & F 4.80 mm thick sheet glass of ordinary quality plain / tinted and glazing with rubber beads, clips etc complete all as specified and directed. |
| 69 | S & F 3 mm thick high quality, durable acrylic panel sheet and glazing with rubber beads, clips etc complete all as specified and directed. |
| 70 | S & F steel mortise lock vertical type 100mm, 4 levers all as specified complete all as specified and directed. |
| 71 | Taking down & sieving the existing sand and saw dust mix laid along the slant height upto a height of 15 meter from GL, re-filling the sand and saw dust mix passed through sieves in position complete all as specified and directed.Note:- (i) Mix of sand and saw dust before sieving shall be brought down and stacked properly. Stack shall be measured and recorded for payment purpose.(ii) Supply and mixing of sand and saw dust shall be measured and paid for separately under respective item of this Schedule. |
| 72 | Mixing only coarse sand and saw dust manually in proportions as directed by GE and filling where directed upto a height of 15 meter from GL complete all as specified and directed. Note:- Sand and saw dust shall be measured and paid separately as 'Supply only' under respective item of the Schedule. |
| 73 | Supply only coarse sand complete all as specified and directed.Note:- Measurement shall be taken from the stacked material and 10% shall be deducted on account of voids. |
| 74 | Supply only saw dust complete all as specified and directed.Note:- Measurement shall be taken from the stacked material and 30% shall be deducted on account of voids. |
| 75 | Taking down chowkhats or frames but with shutters (with out taking off shutter from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 76 | Taking down chowkhats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed. |
| 77 | Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed. |
| 78 | Supplying & fixing 1.25 mm thick Pressed Steel door frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all specified and as directed. |
| 79 | Supplying & fixing 1.25 mm thick Pressed Steel door frames size 125x60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all specified and as directed. |
| 80 | Supplying & fixing solid PVC door frames of sizes 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all specified and as directed. |
| 81 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelam PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , both side prelam PVC sheet used insted of plain colour PVC sheet. Stile and rail feathered at edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified in SSR Part -II. |
| 82 | S&F factory made 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides include for the provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed. |
| 83 | S & F factory made Glazed & Skeleton shutters 35mm thick open rebated & prepare to received glass, gauge etc edges of framing plain chamfered or rounded in window, ventilator etc are provided with stiles and rails in 2nd class hard wood all as specified in SSR part-I, section 8 clause 8.20(b) complete all as specified and directed. |
| 84 | S&F 30 mm thick 2nd class hardwood, Plain, framed, panelled shutters (any number of panels), in with panels of timber flat on both sides (feather edged), of 12 mm BWP commercial ply with commercial veneering on both faces; supplied and fitted to chowkhats |
| 85 | S&F factory made box type steel window 1.25mm thick ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated both guage and glass shutter comprised gaused glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :-(i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. (ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.(iii) MS tower bolt 150mm long 2 No per leaf. (iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf (vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf (vii) 10 mm squre guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutterof window(x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window (xi) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Note: (i) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account. |
| 86 | S & F mild steel box type ventilator partially fixed type with glazing bar with mesh & glass, partially with two shutters all as per item No 85 above but top hung complete all as specified and directed . |
| 87 | Material and labour for perparation of new wooden surfaces of any description not other describe over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, including preparation of new wooden surface complete all as specified and directed |
| 88 | Material and labour preparation of steel of any description not other describe ver 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, including preparation of new steel surface complete all as specified and directed.. |
| 89 | Taking down shutters of any description exc 1sqm but n. exc 2 sqm from chowkhat and re-fixing in same opening after re-securing or easening and adjusting including repair complete all as specified and directed. |
| 90 | Supply and fixing aluminum butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed. |
| 91 | Supply and fixing 200mm long aluminum anodized barrel tower bolt, extruded section, fixed with stainless steel screws complete all as specified and directed. |
| 92 | Supply and fixing 150 mm size extruded aluminum alloy handles fabricated type, anodised fixed with stainless steel screws complete all as specified and directed. |
| 93 | Supply and fixing 300mm aluminum alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed with stainless steel screws complete all as specified and directed. |
| 94 | Supply and fixing in stainless steel wire cloths 0.45 mm nominal dia of wire and average width aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed.. |
| 95 | S &F repairs in stainless steel wire cloths 0.45 mm nominal dia of wire and average width aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed. |
| 96 | Supply and fixing In repair 140mm long floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring, fixed to door shutter fixed with stainless steel screws complete all as specified and directed. |
| 97 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed. |
| 98 | Hacking out old broken glass (any thickness size quality or description) from wooden/aluminum frames or stone, concrete or brick surrounds glazing with putty including S&F 4.80mm thick plain/tinted sheet glass ordinary quality and glazing with aluminum beads in sqm exc 0.50 Sqm in each panes complete all as specified and directed. |
| 99 | Supply and fix in repairs heavy duty Stainless steel (Grade 305) curtain rods 25mm dia complete all as specified and as directed. |
| 100 | Supply and fix in repairs Stainless steel (Grade 305) brackets with finals (open ends) suitable for curtain rods of 25mm dia complete all as specified and as directed. |
| 101 | Supply and fix in repairs Stainless steel (Grade 305) brackets (Dead ends) suitable for curtain rods of 25mm dia complete all as specified and as directed. |
| 102 | Taking up or down 15 mm dia steel tubing & connections including clearing for refixing or removal to store complete all as specified and as directed. |
| 103 | Taking up or down 20 mm bore tubes & connections including clearing for refixing or removal to store complete all as specified and as directed. |
| 104 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 105 | S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 106 | Dismantling water tanks any type of capacity exc 250 but n.exc 500 liters complete all as specified and directed. |
| 107 | S&F 500 liter capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered white, hoisted and fixed in position, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 108 | Dismantling water tanks any type of capacity Exc 500 but n.exc 1000 litres complete all as specified & directed. |
| 109 | S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layered white, hoisted and fixed in position, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 110 | S&F in repair PVC (PTMT) float valve, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed suitable for 20mm bore pipe, complete all as specified and directed |
| 111 | S & F in repair long body stop valve quarter turn 15mm bore fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed. . |
| 112 | S&F in repair 15mm bore long body Angle cock fancy type chromium plated screwed down high pressure complete all as specified |
| 113 | S&F in repair 15mm long body bib taps quarter turn long shank cast copper alloy with crutch or butterfly handle screwed for iron piper or for brass ferrule complete all as specified & directed. |
| 114 | S&F in repair Pillar taps quarter turn long body fancy type with capstan head chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified & directed. |
| 115 | S&F in repairs 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified & directed. |
| 116 | S &F in repair chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to 15 mm bore steel pipe or union complete all as specified & directed. |
| 117 | S & F in repair towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden/plastic cleats complete all as specified & directed. |
| 118 | S&F in repairs 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified & directed. |
| 119 | S&F in repairs 100 mm dia Stainless steel grating complete all as specified and directed |
| 120 | S&F in repairs 75 mm dia Stainless steel with hole grating complete all as specified & directed. |
| 121 | S&F in repairs waste down pipe 32/40mm bore for wash basin/sink complete all as specified and directed |
| 122 | S&F in repairs vitreous china wash down water closet pan pedestal pattern ( type white including PVC seat cover , connection to waste pipe and flushing pipe complete all as specified & directed. |
| 123 | S&F in repairs Health faucet with 1.5mm flexible chromium plated tube and hook fixed to angle valve etc complete all as specified and directed. |
| 124 | S & F in repair 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve and brackets, float and handle, L-Bend complete all as specified and directed |
| 125 | S&F in repairs vitreous china wash basin, white, flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper but including bracket complete all as specified and directed |
| 126 | S & F in repairs vitreous china urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 127 | S&F in repair sinks with drain board made of stainless steel sink of 1mm thick sheet, kitchen or laboratory with plug washer and waste pipe incl bedding in cement mortar 1:6 on to draft wall of including fixing cantilever brackets and connecting unions overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 128 | Demolition up to 100/75mm bore and breaking up drain pipes (AC/reinforced concrete/salt glazed ) complete all as specified and directed |
| 129 | S & F 110mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 130 | S & F 75mm bore PVC SWR Pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 131 | S&F PVC (SWR) bends of 110 mm bore complete all as specified and directed |
| 132 | S&F PVC (SWR) bends of 75 mm bore complete all as specified and directed |
| 133 | S & F in repair 75mm bore PVC (SWR) floor trap, with grating plain/ whole including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 134 | S&F in repair 12mm thick Toughened glass as in Bathroom cubical or partitions with fixing of all necessary fitting & fixtures complete all as specified and directed. Note:- Fitting/Fixtures will be paid under following subject Items. |
| 135 | Supply Only Wall to glass hinges, Glass to Glass hinges, complete all as specified and directed. |
| 136 | Supply only wall to glass connector, Floor clamp, complete all as specified and directed. |
| 137 | Supply only Stabilizer rod with Knobs, Plastic parts, complete all as specified and directed. |
| 138 | Supply only Towel rod/door handle, complete all as specified and directed. |
| 139 | S&F as in repairs turbo ventilators stainless steel 304 grade, throat dia 600mm, with double bearing, fixed on roof at a height exc 10 m but n exc 15 m complete all as specified and directed.Note : T&P required to fix the turbo ventilator at the any height specified shall be arranged by the contractor at his own and he is advised to keep it mind while quoting his rates. |
| 140 | Servicing to existing turbo ventilators by applying necessary grease /oil and making serviceable complete all as specified and directed.Note : T&P required to fix the turbo ventilator at the any height specified shall be arranged by the contractor at his own and he is advised to keep it mind while quoting his rates. |
| 141 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling of sheets complete all as specified & directed. |
| 142 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified & directed. |
| 143 | M&L for providing Post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre i.e. holes @300mm interval including drilling and plugging holes etc in apron/plinth protection and making good the surfaces to match the existing surface complete all as specified and directed. |
| 144 | M&L for providing post construction anti termite treatment to soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart along the junction of floor and wall including drilling 12 mm dia holes and plugging with cement sand mortar (1:2) using pigment wherever required, to match the existing floor surfaces complete all as specified and directed.Note :- Any crack which is developed during execution of ATT in the floor shall be repaired to match the surface. The cost of this aspect shall deemed to be included in the rates quoted by the contractor |
| 145 | M&L for providing post construction anti termite treatment to voids in masonry using chemical @ one litre per holes at 300 mm intervals by drilling holes at downward angle of 45 degree and replugging them with cement mortar 1:2 & make good to match the existing surface complete all as specified and directed. |
| 146 | M&L for providing post construction anti termite treatment at points of contact of wood work by using chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6 mm dai holes at downward angle of 45 degree at 150 mm centre to centre and sealing the holes with cement sand mortar (1:2) using pigment where ever required & make good to match the existing surface complete all as specified and directed. |
| 147 | S&F in repair Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories Set , incl Cistern fittings, size 385x720x715mm complete all as specified directed by Engineer-in-Charge. M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
