|
| 1 | Supply, installation, testing and commissioning of Centrifugal Pump Set (70-75) HP/55KW, 60 LPS at 60 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including Electric motor 1440 RPM with coupling including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 2 | Supply, installation, testing and commissioning of Centrifugal Pump Set 90 HP/66 KW, 60 LPS at 60 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including Electric motor 1440 RPM with coupling including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 3 | Supply, installation, testing and commissioning of Centrifugal Pump Set 50 HP/37 KW, 35/40 LPS at 60 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including Electric motor 1440 RPM with coupling including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 4 | Supply, installation, testing and commissioning of Centrifugal Pump Set 25 HP/ 11.26WHP, 27 LPS at 40 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 5 | Supply, installation, testing and commissioning of Centrifugal Pump Set 30 HP/ 13.5WHP, 27.5 LPS at 55 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 6 | Supply, installation, testing and commissioning of Centrifugal Pump Set 40 HP/ 13.5WHP, 30 LPS at 55 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 7 | Supply, installation, testing and commissioning of Centrifugal Pump Set 200 HP/ 90.09WHP, 378.33 LPS at 30 metre head with mechanical seal, SS shaft, GM Impeller, IE-4 Motor, Insulation type B, suitable for 415 Volt, 50HZ, IP-58 including taking down old u/s centrifugal pump and despositing in MES store yard complete all as specified and directed. |
| 8 | Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well (Casing pipe size 200/250 mm) supply and Install complete 7.5/8 HP submersible pump with 120 metre head 130 LPM including lowering/lifting from existing borewell if required complete all as specified and directed. |
| 9 | Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well (Casing pipe size 200/250 mm) supply and Install complete 5/6 HP submersible pump with 120 metre head 90 LPM including lowering/lifting from existing borewell if required complete all as specified and directed. |
| 10 | Supply and installation of Non Clog Submersible pump with 20 metre head of capacity 10 HP including including lowering/lifting from existing lifting well if required complete all as specified and directed. |
| 11 | Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well (Casing pipe size 200/250 mm) supply and Install complete 12.5 HP submersible pump with 110 metre head 130 LPM including lowering/lifting from existing borewell if required complete all as specified and directed. |
| 12 | Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 250/300 mm dia bore well (Casing pipe size 200/250 mm) supply and Install complete 20 HP submersible pump with 120 metre head 210 LPM oil cooled including lowering/ lifting from existing borewell if required complete all as specified and directed. |
| 13 | Supply and installation of Submersible pump, electric driven 415 V, TP suitable for 250/300 mm dia bore well (Casing pipe size 200/250 mm) supply and Install complete 15 HP submersible pump with 120 metre head 150 LPM oil cooled including lowering/ lifting from existing borewell if required complete all as specified and directed. |
| 14 | Supply and installation commissiong of high pressure single head adjustable dosing System 10% to 100% through a simple adjustable knob with accuracy of +2% Inj pressure, power input 230 V ,50 Hz max out put 27 ltr/Hr including taking down and despositing in MES store yard complete all as specified and directed with mandatory accessories like head tubing, connecting ferrule, check valve etc including the following (i) Level switch for dry run cut off to avoide motor failure(ii) Adopter in stainless steel construction with FHP motor for solution making .(iii) FRP dosing Tank Of net cap 100 ltr with removable lid ,level indicator and chemically resistance .(iv) Suitable agitator single Phase Flange mounted motor with Plastic Shaft and impeller. |
| 15 | Supply, installation, testing and commisiing Monoblock Pumping set suitable for 415 V, 3 Phase system having cap 5 HP complete all as specified and directed. |
| 16 | Supply, installation, testing and commisiing Monoblock Pumping set suitable for 415 V, 3 Phase system having cap 10 HP complete all as specified and directed. |
| 17 | Supply, installation, testing and commisiing Monoblock Pumping set suitable for 415 V, 3 Phase system having cap 15 HP complete all as specified and directed. |
| 18 | M & L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised strip of size 32 mm x 6 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe light grade of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 of SSR part I, connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe 20mm medium grade, funnel, etc. complete all as specified and directed. |
| 19 | Supply installation Testing and commissiong of soft starter Panel with compact design ,essential motor protection i.e . Over load protection ,single phase preventer ,auto phase corrector,bypass contactor etc alongwith incoming MCCB of 500 AMP ,415 v,50 KA , as incoming ,Multi function meter,indicatore etc designed for 200 HP centrifugal pumping set complete all as specified and directed. |
| 20 | Supply installation Testing and commissiong of Soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector ,by pass contactor etc alongwith incoming MCCB of 250 AMP ,415 v, 50 KA , as incoming ,Multi function meter ,indicator etc designed for 90 HP centrifugal pumping set complete all as specified and directed. |
| 21 | Supply installation Testing and commissiong of Soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector by pass contactor etc alongwith incoming MCCB of 250 AMP ,415 v, 50 KA , as incoming, Multi function meter, indicators designed for 75 HP centrifugal pumping set complete all as specified and directed. |
| 22 | Supply installation Testing and commissiong of soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector, bypass contactor etc alongwith incoming MCCB of 160 AMP, 415 v, 36 KA , as incoming, Multi function meter,indicators designed for 50 HP centrifugal puming set complete all as specified and directed. |
| 23 | Supply installation Testing and commissiong of soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector etc alongwith incoming MCCB of 160 AMP ,415 v, 36 KA , as incoming ,Multi function meter, indicators designed for 40 HP centrifugal puming set complete all as specified and directed. |
| 24 | Supply installation Testing and commissiong of Soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector, bypass contactor etc alongwith incoming MCCB of 100 AMP, 415 v, 36 KA , as incoming, Multi function meter designed for 30 HP centrifugal pumping set complete all as specified and directed. |
| 25 | Supply installation Testing and commissiong of soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector etc alongwith incoming MCCB of 100 AMP ,415 v, 36 KA, as incoming, Multi function meter designed for 25 HP centrifugal pumping set complete all as specified and directed. |
| 26 | Supply installation Testing and commissiong of Soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector etc alongwith, Multi function meter, indicators designed for 5 HP to 7.5 HP Monoblock pumping set/Submersible pump complete all as specified and directed. |
| 27 | Supply installation Testing and commissiong of Soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector etc alongwith ,Multi function meter ,indicators,indicators designed for 10 to 12 HP Monoblock pumping set/Submersible pump complete all as specified and directed. |
| 28 | Supply installation Testing and commissiong of soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector etc alongwith, Multi function meter designed for 15 HP Monoblock puming set/ Submersible pump complete all as specified and directed. |
| 29 | Supply installation Testing and commissiong of soft starter Panel with compact design ,essential motor protection i.e. Over load protection ,single phase preventer ,auto phase corrector etc alongwith ,MCCB of 100 AMP ,415 v,36 KA Multi function meter designed for 20 HP Monoblock pumping set/Submersible pump complete all as specified and directed. |
| 30 | Supply & laying pipe DI S/S including specials ,Class K-7, 100 MM 4\\" dia including taking out old u/s pipes complete all as specified and directed. |
| 31 | Supply and Fixing in replacement 3 core Flat Cable multistranded copper conductor wire of 6 Sq mm size in 100 RM Roll , 1100 volts complete all as specified and directed |
| 32 | Supply and Fixing in replacement 3 core Flat Cable multistranded copper conductor wire of 10 Sqmm size in 100 RM Roll , 1100 volts complete all as specified and directed |
| 33 | Supply and Fixing in replacement PVC insulated multistranded copper conductor wire of 16 Sq mm size, single core, 1100 volts complete all as specified and directed |
| 34 | Supply and Fixing in replacement PVC insulated multistranded copper conductor wire of 25 Sq mm size, single core, 1100 volts complete all as specified and directed |
| 35 | Supply and Fixing in replacement PVC insulated multistranded copper conductor wire of 35 Sq mm size, single core, 1100 volts complete all as specified and directed |
| 36 | Taking out of Startar upto 250 capacity from any location all as specified and directed. |
| 37 | Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line/cable in any type of soil getting out and levelling of bottom surface to required level complete all as specified and directed. |
| 38 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed. |
| 39 | Removing excavated material from site to a distance not exc. 50 mtr away and depositing where directed not exc 1.5 mtr from the stating point complete all as specified and directed. |
| 40 | M&L for PCC 1:3:6 type C-2,using stone aggregate 40mm graded as in foundation of stays and coping of poles including necessary form work where required and fair finish to the exposed surfaces including broken of existing PCC all as specified and directed. |
| 41 | M&L for PCC 1:4:8 type D-2, using stone aggregate 40mm graded as in foundation for electric poles and making of cable duct including necessary form work where required and fair finish to the exposed surfaces complete all as specified and directed. |
| 42 | M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, nut bolt,washer etc. for foundation of Pumping Set complete all as specified and directed. Please Enable Macros to View BoQ information |
