|
| 1 | MATERIAL Rigid P.V.C. pipes with one loose coupler for every 6.0 mtr. Length and solvent cement accordingly to technical specification as per I.S.No. 4985/2000 with latest amendments and duly I.S.I. certification marked & CIPET tested. 315 mm.dia Class-I (0.25 MPA) with Coupler |
| 2 | Rigid P.V.C. Accessories of Class-II (0.4 MPA) according to Technical specification as per relevant IS Code with latest amendment & duly I.S.I. certification marked & CIPET tested. 315 mm.dia F.T.P. with Metallic flange |
| 3 | 315 mm.dia Extra Coupler |
| 4 | Solvent cement conforming to I.S. No. 14128/94 with latest amendments, Medium Bodies. |
| 5 | Rubber Insertion, duly, reinforced 5 mm.thick 2 plies as per I.S.No.-6392 with latest amendments.300 mm.dia (Table-17) |
| 6 | Febrication, supply and transport of 300 mm dia GALVANIZED MILD STEEL Z bend,average length 2 mtr, both end ISI marked flanged of size 300 mm NB, 5.00 mm thick M.S. ERW pipe and 300 mm dia MS plate flanged 12 mm thick with 12 nos drilled hole equally spaced fitting and fixing by running welding with painting complete as per direction of EIC .Galvanization: The materials are to be hot dip galvanisedas per IS 4736-1986 only after complete fabrication of materials. No welding is allowed after fabrication. All the materials are to be fabricated as per drawing. Minimum galvanisation coating thickness should be 80micron |
| 7 | M.S. Hexagonal Head Bolts & Nuts conforming to IS-1363 (Part-I) 1992 product grade - C with latest ammedments for boths IS-1363 (Part-3) / 1992 of product grade C with latest ammendments for nuts properties / class for bolt 4.62 nuts for 4.5.M 16 X 80 mm |
| 8 | WATER TRANSMISSION ARRANGEMENTEarthwork in excavation of field trenches as per designed section & alignment for laying of pipe lines(PVC,RCC,ACP etc.) upto a depth of 1500 mm in all sorts of soil including removing, spreading or stacking extra earth as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom as required complete |
| 9 | Laying of P.v.C. pipes of different diameters within field trenches in curve /straight line using P.V.C. fittings, viz. Bend, Tee, Reducer etc. and making leak proof joints with couplers after roughening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipes, fittings and solvent cement to be supplied by Deptt.) all complete as per direction of Engineer-in-Chargeb) 315 mm dia |
| 10 | Earth work in filling in trenches after laying pipe lines (PVC,RCC,ACP etc.) with good earth obtained from excavation of field trences in layer not exceeding 225 mm , including watering & ramming etc. layer by layer complete. (payment will be made on the basis of measurement of finished quantity of work) |
| 11 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidated the same by through saturation with water ramming complete including the cost of supply of sand. |
| 12 | Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(a) Pakur vareit |
| 13 | Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.W. pipes and accessories (to be supplied departmentally) including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge. (i) 150 mm. dia. ERW pipe |
| 14 | Providing and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD drawing and Technical specifications. for 600 mm dia pipe (As per rate analysis) |
| 15 | Testing of pipe line system against leakages by filling the distribution chamber with water and supplying water through the entirepipe line net work for at least 4 (four) hour by running the departmental Diesel Engine pumping set, including supplying necessary fuels & lubricants and hiring and transporting tools and plants all complete as per direction of Engineer-inCharge |
| 16 | Carriage charge (4%) on every item from Sl. no-8 to 15 excluding Sl. No-8,10 & 15 on 185170.95 |
| 17 | Add GST @18% for the item No (8 to 16) on 238841.63 |
| 18 | cess 1% on for the item No (8 to 17) on 281833.12 Please Enable Macros to View BoQ information |
