|
| 1 | Dismantling the existing damaged wiring , cables, switch and depositing the same to the concerned authority, including mending good damages neatly. ( Wiring with necessary arrangements-300 mtr. 4 core 50 sqmm cable-50 mtr , 4 core 35 sqmm cable-50 mtr,100A TPNSFU-1 nos ).One new existing 6 way VTPNMCBDB and 4 way HTPNMCBDB at lift place is to be shifted after dismantling the existing connection and refixing of the same from 5 mtr distance of the existing location including necessary connection. Existing newly laid 4 core 70 sqmm cable which feed the power to the 6 way VTPNMCBDB will be removed from the existing location and then reconnected to the VTPNMCBDB. (Considering 1 Skilled, 02 nos Semi-Skilled & 2 Nos Unskilled) |
| 2 | Supply & Delivery of 1.1KV grade 4 core 16 sqmm XLPE insulated Aluminium Ar. cable ( Make -Gloster/ RR cable/ Havells/ polycab) (From existing light Panel 63A MCCB to RCCB incoming power connection for lift) |
| 3 | Laying of 4 core 16 sqmm cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. |
| 4 | S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable.incl.finising the end as follows a.) 4 core 16 sq. mm. |
| 5 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (Legrand ) 4 Way |
| 6 | Supplying and fixing of 40A 300mA FP RCCB (Legrand 411887) in existing four pole SS enclosure including necessary connection and earthing attachment. |
| 7 | Supplying and fixing double-door(2+8 way) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make -Legrand/Schneider/ABB) Incoming - DP MCB Isolator 40A -1.Outgoing 6 A -32 A SPMCB-8 nos |
| 8 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.(a) 20 mm size. |
| 9 | Supply and fixing of 19 mm dia. 1.6mm thick GI conduit (ISI medium)(inner surface should be smooth) complete with fittings such as necessary bends, tees, inspection box, circular box saddles etc. as necessary on ceiling/beam/wall bound with 22SWG G.I. binding wire including supplying and drawing 1X18 SWG G.I. wire as fish wire inside the pipe having colour paint at one face fastened at the load point end of the G.I. pipe with fish wire on ceiling . for passing copper wires. |
| 10 | Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in GIconduit and painting Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in GI conduit and painting3x1.5 sqmm wire in 19 mm conduit incl. S&F 2x10 SWG GI ECC |
| 11 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC For Power plug and Computer board15A plug.( Xerox machine of reading room,15 A plug for tea making area,CCTV and computer board near librarian and testing board of electrician) |
| 12 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC For A.C ( A.C machine for Prakasana and new patrika ghar) |
| 13 | 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC .From TPN BDB to 2+12 way SPN BDB .( SPNMCBDB for Prakasana) |
| 14 | 4 x (10 sqmm) + 2 x 6 sqmm) ECC From VTPNMCBDB to HTPNMCBDB ( Karjalay HTPNMCBDB) |
| 15 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 16 | a)2.5 sqmm |
| 17 | b)4 sqmm |
| 18 | c)6 sqmm |
| 19 | d)10 sqmm |
| 20 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make: Legrand Myrus/ Anchor Roma Urban/ Cabtree Verona) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.( lift, testing of electrician board and induction m/c for tea making) |
| 21 | Supply & Fixing LED bulk head light fitting (10W)on Wall/ ceiling .( Make-Philips, Cat no.-WT202WLED10S NWPSU S3 PC/Eqv Crompton / wipro) ( for lift) |
| 22 | Supply & Fixing 240 V, 6 A, Modular type switch (Make: Legrand Myrus/ Anchor Roma Urban/ Cabtree Verona) on 2 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 23 | Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as per GS |
| 24 | Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) |
| 25 | a) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required Please Enable Macros to View BoQ information |
