|
| 1 | Supply of following size of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS :694/210 etc. rqd. 3x2.5 sq.mm with voltage grade 1100 volts. |
| 2 | Development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. The development shall be considered complete when Gravel stop sinking, Discharge ceased to improve and the sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as reqd. |
| 3 | Comprehensive AMC (Annual Maintenance Contract) for repair and maintenance of Tube Wells installed at various Municipal Parks Cost for one Tube wells with submersible pump set etc of rating upto 1/1.5 HP for one year |
| 4 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.(a)40 Amp. |
| 5 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 6 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 7 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 8 | Supply lowering and fixing following size of G.I Pipe (M-Class) i/c cutting threading on both side etc. ISI marked etc as reqd. 32 mm (Nominal Bore). |
| 9 | Supplying and fixing following size of G.I. Socket as reqd. 32 mm dia |
| 10 | Supplying and fixing following size of G.I. Union as reqd. 32 mm dia |
| 11 | Supplying and fixing following sizes of GI Elbow as required 32 mm dia. |
| 12 | Supply and Fabrication of pole protection system made up of 8 SWG steel wire mesh of size 25mm x75mm rectangular with 50mm x 50mm x 6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc. as rqd. |
| 13 | Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. |
| 14 | Supply of XLPE insulated PVC sheathed Al. conductor armoured cable 1.1 KV grade confirming to IS-7098 of following size:2C*6 sqmm. |
| 15 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 16 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm Please Enable Macros to View BoQ information |
