|
| 1 | CIVIL & PH WORKSEarthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 2 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 3 | Providing & laying C.C. of prop.(1:4:8) in F & P, fountain, pathway toe wall, fountain base, base of column using 40mm nominal size down graded, screend, washed hard black cursher broken granite metal of approved quality & from approved quarry including laying in the layers hoisting, lowering, laying, watering and curing etc. complete to the requaired levels including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 4 | Providing and fixing at or near ground level precast cement concrete in kerb stone of 300 x 300 x 150mm as per approved pattern and setting in position with cement mortar (1:3) (1 Cement : 3 Coarse sasnd), including the cost of required centering, shuttering etc. complete and direction of Engineer in charge. |
| 5 | Providing & laying CC of prop. (1:2:4) using 12mm to 20 mm nominal size down graded, screened, washed hard black crusher broken granite chips of approved quality & from approved quarry, watering and curing etc. complete including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 6 | Providing and laying 60mm thick inter locking paver blocks of approved shade, design having minimum compressive strength 35N/mm² over a layer of 50mm thick compacted sand laid over sub-base and compacted with vibrator including cost, conveyance, royalty and taxes of all materials complete and as per direction of Engineer-in-charge. |
| 7 | Supply and fixing of RCC Precast chairs of size 1.50 mtr. by the side of the path ways as per direction of Engineer-n-charge. (Chair size-1650mm x 900mm x 700mm) |
| 8 | Brick work with Fly Ash Brick in cement mortar ( 1:6) in Foundation & plinth with best quality bricks of size 25cm x 12cm x 8cm having minimum crushing strength from 75 Kg/cm2 wih dimension tolerance +2% immersing (well shaped, uniform in size) includes molding, chamfering, corbelling complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 9 | Brick work with Fly Ash Brick in cement mortar ( 1:6) in Super Structure with best quality bricks of size 25cm x 12cm x 8cm having minimum crushing strength from 75 Kg/cm2 wih dimension tolerance +2% immersing (well shaped, uniform in size) includes molding, chamfering, corbelling complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 10 | Providing & applying Two coat weather coat of exterior grade of approved make and shade an even finished surface over a coat of primer at all height with all scaffolding and staging charges including cost, conveyance of all materials and cost of all labour, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 11 | Painting Two coats of synthetic enamel paint over iron surface over a coat of primer of approved quality, sand papering, polishing the surface including cost, conveyance of all materials cost of all labour, T&P etc. as required for the work complete as per direction of Engineer in charge. (Paints and primer will be supplied by the contractor). |
| 12 | Supplying, fitting and fixing properly as per approved drawing and design and specification of M.S. grill in windows, the cost of hardware such as screws and welding if necessary to the windows as required for the work including cost, conveyance of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge . |
| 13 | Supply, fitting and fixing of tiles in floors treads or steps and landing over 25mm thick bed of C.M. 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete including cost of all materials, labour etc. all complete as required for the work and direction of Engineer-in-charge. (Granite over floor) |
| 14 | Providing 12mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick work after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 15 | Providing 16mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick work after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 16 | R.C.C. work of M-20 having minimum compressive strength of 200kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge (but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 17 | Column Base |
| 18 | Plinth Beam |
| 19 | Column |
| 20 | Lintel |
| 21 | Chajja |
| 22 | Roof Beam |
| 23 | Roof Slab |
| 24 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 25 | Providing 6mm thick cement plaster in cement mortar of proportion (1:4) over even surface of RCC surface finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 26 | Providing & applying Two coat weather coat of interior grade of approved make and shade an even finished surface over a coat of primer at all height with all scaffolding and staging charges including cost, conveyance of all materials and cost of all labour, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 27 | Supply, fitting and fixing of tiles in floors treads or steps and landing over 25mm thick bed of C.M. 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete including cost of all materials, labour etc. all complete as required for the work and direction of Engineer-in-charge. |
| 28 | VetrifiedFloorTile (600mmX600mm) |
| 29 | Vetrified Tile Dado (600mmX600mm) |
| 30 | Glaze dCeramic Floor Tile (30cmX30cm/ 40cmX40cm) |
| 31 | Chequered Floor Tile |
| 32 | Filling Foundation and Plinth with excavated earth/materials / moorum including laying in layers, ramming and watering well with initial leads and lifts T&P etc. complete as directed by the Engineer-in-charge. |
| 33 | Providing 25mm thick grading plaster in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 34 | Supplying, fitting and fixing of Window (Sliding Type) made of aluminum section 151-154, 151-155 as windows frame section as shutter frame with 5mm thick black glass as panel fittd with rubber beading friction stay including locking arrangement all cost of labour,T&P hire charges of drilling machine etc complet as per direction of Engineer-in-charge. |
| 35 | Providing and fixing natural anodized aluminium door,(frame and shutter) fabricated from extruded aluminium alloy section 9202 as per vertical member, 9201 as top member , anodized to 15 microns in silver satin mat finish, members confirming to ISI mark, partly paneled with 12mm thick pre-laminated exterior grade wood based graded ISI mark (ISI-12823) prelaminated particle board confirming to approved make, colour and shade, partly glazed using 5mm thick plain glass, including providing all necessary fittings, fixtures and handle, brass door lock, double acting floor spring, (shutter opening inside only)aluminium tower bolt, neoprine gasket, etc., as per drawing, and fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling the gaps if any, between the frames and walls/columns, with appropriate sealant including cost of all materials, labour, conveyance, taxes, royalties, scafolding, direction of the Engineer-in-charge. |
| 36 | Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete. (Glazed wall tile) (30cmX30cm/40cmX40cm) |
| 37 | Supplying, fabricating and installing the stainless steel door of 304 grade by using 30mm x 30mm x 1.6mm square pipe as three legged choukath frame. The SS door shutter made by using 16 gauge SS sheet and SS Jalli of 16 gauge in top most part of the door shutter, the door shutter frame is made with 30mm x 30mm x 1.60mm square pipe and 12mm square pipe of 16 gauge in horizontal supported by 3 pairs and 4 verticals to strengthen and to enhence decent look. The fittings with locking arrangements are also made in the door. There is sign of Male and Female also made. It includes all transportation and installation etc. complete as per direction of Engineer in charge. |
| 38 | Providing and fixing of Fixed Ventilator of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6mm thick \\"D\\" quality galvanized as per IS-277 with zinc of 120 Gm/sqm) It includes all transportation and installation etc. complete as per direction of Engineer in charge. |
| 39 | Supply, fitting and fixing of different type of Children Play Equipments as per approved design incluidng cost, conveyance, fitting and placing as directed by EIC etc. complete and direction of Engineer in charge. |
| 40 | FOUR SEATED SEA SAW |
| 41 | TWOO-SEATED ARCHED SWING |
| 42 | SPIRAL SLIDE |
| 43 | ROTO TRIPLE SLIDE |
| 44 | MULTI-PURPOSE PLAY UNIT (FMPU-09) |
| 45 | Supply and fixing of 1000 ltr. capacity Rotational moulded Polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 in 1st floor over a staging of 60 cm with required Fly ash brick work, RCC beam and slab as per drawing and specification including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixding Ball Valve etc. including hoisting up to a height of 5 meters above ground level and placing the tank to the required position etc. all complte as per specification and direction of Engineer-in-charge. |
| 46 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80 confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 47 | 25mm dia |
| 48 | Supplying all materials,labours,T&P and fixing to wall, celling and floor UPVC pipe confirming to ASTM 1785 (sch 80) of the following nominal diameter with clamps and fittings including testing as per specification etc all complete as per PH specification and direction of Engineer-in-charge. |
| 49 | 25mm dia |
| 50 | 15mm dia |
| 51 | Supplying all materials, labour, T&P, fitting & fixing brass screw stop down cocks/ G M Full way valves of the following size including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 52 | 20 mm dia (G F M W Valve( ISI) |
| 53 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 54 | 250mm thick wall |
| 55 | RCC slab up to 19 cms thick |
| 56 | Grrove Cutting |
| 57 | Supplying all materials,labour and T&P for constructing Inspection chamber of size 0.75 x 0.75 x 0.45m with R.C.C. top slab in M25 mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with flyash bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification and direction of Engineer-n-charge. |
| 58 | Supplyng all materials, labour, T&P for construction of C.I. Gulley trap chamber of size 250mm x 250 m x 675.0m by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm PVC grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 59 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 60 | 110mm OD PVC SWR pipe S/S ;type 'B' |
| 61 | 75mm OD PVC SWR pipe |
| 62 | 110mm PVC 'P' Trap |
| 63 | 110mm PVC Door Tee |
| 64 | 110mm Plain Tee |
| 65 | 110mm PVC Plain Bend |
| 66 | 111mm PVC Door Bend |
| 67 | 110mm PVC Cowl |
| 68 | 110mm PVC Off set Bend. |
| 69 | 90mm PVC Nahani Trap |
| 70 | 75mm PVC Door Tee |
| 71 | 75mm PVC Plain Tee |
| 72 | Supplying all materials, fitting and fixing T&P Type B-1 standard bedding in haunching etc complete as per PH specification and direction of the engineer in charge |
| 73 | Supplying all materials, labour, T&P, fitting and fixing of following Sanitary fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 74 | EWC with 'P' Trap |
| 75 | 550 x 400mm Wash Hand Basin with padestal |
| 76 | 15mm size C. P. Angular Stop cock |
| 77 | 15mm size C. P. Pillar Cock |
| 78 | BE Mirror |
| 79 | 20mmm x 600mm size C.P. Towel Rail (Make - Plaza / Zigma / Amber) |
| 80 | C.P. Towel Ring |
| 81 | C.P. Soap Holder |
| 82 | C.P. Glass Shelve |
| 83 | 10 Ltr. Capacity L. L. Flushing Cistern (Make - Parryware / Nycer / Cera) |
| 84 | 15mmx450 mm PVC Connection pipe |
| 85 | 32mm x 600mm PVC Waste pipe (Make- Supreme / Prince / Prayas) |
| 86 | 32mm CP Waste Coupling (Make- Prayas) |
| 87 | 15mm size C. P. Flange Small |
| 88 | 15mm x 50mm C.P. Extension piece |
| 89 | EWC Seat with Cover |
| 90 | 125mm C.P. Grating |
| 91 | Squating Urinal of 600 x 350mm dia |
| 92 | Procelain Medium Flat back standing Urinal |
| 93 | Labour for drilling a perfectly vertical bore of specified dia for a specific depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of 200mm dia PVC / GI / M.S. pipes for Housing fitted with socket and with or without well screen as per the necessity for soft, medium hard and boulder formation, PVC / GI casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube wells |
| 94 | Lowering the following size PVC / GI / M.S. pipe with or without slotted pipes as per the necessity from ground level up to 30 mtr. depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. |
| 95 | Lowering of 200mm dia PVC pipe of Schedule -80 |
| 96 | Cost of 200mm dia PVC pipe of Schedule -80 |
| 97 | Cleaning and developing the tube well with their own compressor continuously worked till clear and adequate discharge is obtained from tube well including supplying and use of all necessary materials and labour as per direction of Engineer in charge. |
| 98 | Supplying all materials, labour ,T&P and withdrawing casing pipe from the unsuccessful bores.(Shall be approved by competent authority before with drawl. If so arises due to failure bore only) with fittings incluidng testing as per PH specification and direction of Engineer in charge. |
| 99 | Supplying all materials labour and T&P and laying in trenches unplasticized PVC pipes conforming to ASTM 1785/89 (sch-80) of of the following nominal diameter with fittings including testingsize as per PH specification and direction of Engineer in charge. |
| 100 | 50mm UPVC pipe |
| 101 | 25mm UPVC pipe |
| 102 | Supplying all materials labour and T&P and fitting and fixing of PVC Ball Valve of the following size as per PH specification and direction of Engineer in charge. |
| 103 | 50mm dia Ball Valve |
| 104 | 20mm dia Ball Valve |
| 105 | Supplying all materials, labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs. below ground level (as per drawing) to plug the bore hole including cost of cement etc.all complete as per direction of Engineer in charge.Minimum one metre of casing pipe to be inserted in the bore into the rock all the bottom to ensure sanitary sealing. |
| 106 | Supplying all materials, labour and T&P and installation of 1.50 HP submerible pump set to run on single phase 220/240 volts with following acessories complete as per direction of Engineer in charge. (Q=4.00 m³ / Hour and H=60 Mtr, Make KSB Cora 4C/12 = UMAI-S) |
| 107 | DOL starter with volt meter, amper meter, off/ on switch, motor protection device, over load relay, contactor,power indicator etc all complet in a dust proof cabinet. |
| 108 | 50 mm dia HDPE pipe ( 10 kg/ cm² ) |
| 109 | 2.5 sq mm 3 core copper flat submersible cable |
| 110 | Poly propelene rope |
| 111 | M S Holding split clamp |
| 112 | S S nipple |
| 113 | S S bolts and nuts |
| 114 | bore cover for 200 mm dia pipe |
| 115 | 40 mm G I socket |
| 116 | 40 mm G I bend |
| 117 | 40 x40x15mm G I Tee |
| 118 | 40 mm G I short piece |
| 119 | 50x40 mm G I R S |
| 120 | 40 mm G I union |
| 121 | 50 mm G I union |
| 122 | 50 mm PVC pipe ( sch-80) |
| 123 | Labour charges for assembling and lowering of the submersible pump set to the production well along with steel rope all complete as per direction of Engineer-in-charge. (Excluding of Steel Rope) |
| 124 | ELECTRICALWORKSSupply & fixing of 40Watt decorative post top fitting. as per direction of Engineer-in-charge. |
| 125 | Supply and Fixing of decorative 3Mtr light post top pole |
| 126 | Providing and laying C.C (M-30) using 20mm size down graded crusher broken hard granite chips including the cost of centring and shuttering with cost of all labour, materials.T & P and taxes, royality etc complete in all respect as per the direction of Engineer-in-charge. |
| 127 | Supply and fixing of Coil earthing. |
| 128 | Recessed/surface wiring to light point/fan point/ Exhaust fan point with 1.5 Square mm FR PVC insulated single core multistranded copper conductor of ISI marked with 20mm dia. non-metallic PVC flexible conduit with 5 Amp, 25 on MS box having front bakelite cover of suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistranded copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge. |
| 129 | Light point. |
| 130 | Fan Point |
| 131 | Exhaust Fan Point |
| 132 | Supply and fixing of Exhaust Fan. |
| 133 | Supply and fixing of 6Amp Plug Point. |
| 134 | Supply and fixing of 10W LED bulk head fitting. |
| 135 | Supply and laying of 2x6mm2 Al.Ar. U.G cable. |
| 136 | Supply and laying of 4x16mm2 Al.Ar. U.G cable. |
| 137 | Supply and Laying of 40mm HDPE pipe for laying of Cable. |
| 138 | Cable trenching in all type of soil excepting rocky soil including excavation of earth, brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying 1no 1.1 KVPVC insulated PVC sheathed armoured cable removal of surplus earth to a lead up to 5km. |
| 139 | S/F of Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.Incoming:-1. 63Amp 25KA 4P MCCB-1 NoOutgoing:-1.40Amp TPN MCCB-01 No. 2.32Amp DP MCB-2 Nos.3.200Amp copper bus bar.4. 0-100Amp Ammeter with selector switch-1Set 5. 0-500Volt Voltmeter with selector-1Set6. Indicator lamp-1Set. 7.Time switch with contactor complete set Size of panel board 36\\"x 24\\"x10\\" |
| 140 | Supply and fixing of Standard earthing. |
| 141 | Supply and fixing of 20Watt LED Tube light. |
| 142 | Supply & fixing of lawn mower point. |
| 143 | HORTICULTURALWORKSTrenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil,by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with farm yard manure before and after flooding trench with water(excluding cost of imported earth,manure) |
| 144 | Rough Dressing the trenched ground including breaking clods |
| 145 | Uprooting weeds froom the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation |
| 146 | Supplying and staking of Farm yard Manure(cowdung based) from approved source carriage upto 5 km lead complete(Manure measured in stacks will be reduced by 8% for payment),trench to be filled with soil&FYM in 1:9,reqt of FYM |
| 147 | Screened the FYM through sieve of I.S. designation 20 mm |
| 148 | Supplying and staking of garden soil/good earth at site including royality and carriage upto 10 km lead complete(earth measured in stacks will be reduced by 20% for payment),cost for1cum |
| 149 | Mixing earth and FYM in the required proportion specified or directed by Horticulture officer incharge |
| 150 | Spreading of Sieved FYM & soil in required thickness as per direction of Horticulture officer-in-charge(cost of FYM,good earth to be paid separately |
| 151 | Providing &laying Bahiya/ Mexican turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly. as per direction of officer - in - charge. |
| 152 | Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts complete if top dressing required paid separately(Cost of FYM or extra good earth to be paid separately) as per direction and satisfaction of officer incharge. |
| 153 | Supply of tree plants as per specification enclosed |
| 154 | Tabebuia sp. height 150-165 cm. in big polybag size 25 cm |
| 155 | Providing and stacking of Erythrina indica of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 156 | Plumeria acutifolia height 150-165 cm. with 3-4 branches in big size HDPE bag |
| 157 | Plumeria rubra height 120-150 cm., 3-4 branches and thick stem in bigsize HDPE bag |
| 158 | Supply of ornamental shrub plants as per specification enclosed |
| 159 | Providing and stacking of Tecoma stans of height 90-105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge |
| 160 | Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bag of size 25 cm |
| 161 | Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. plant in 20 cm size of Earthen Pot/Plastic Pot |
| 162 | Supply of ornamental Hedge/ground cover/edging plants as per specification enclosed |
| 163 | Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25, cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm, of Earthen pot/plastic pot as per direction of officer-in-charge. |
| 164 | Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge |
| 165 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot/ Plastic pot |
| 166 | Jasminum grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pot/Plastic pot |
| 167 | Plantation of Ornamental tree,palm,shruba and hedges at site including watering,removal of unservicable materials as per direction of HO incharge(excluding cost of plants&water) |
| 168 | Cost of Planting Tree &Palm |
| 169 | Cost of Planting Shrub |
| 170 | Cost of Planting Hedge/edging plant |
| 171 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, hedge, flower beds, foliages, creepers etc. including hoeing, weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide , lawn mover and brush cutter with fuel will be provided by the Department & other T & P material/articles shall be provided by the contractor.)and as per direction of officer in charge |
| 172 | Complete maintenance of trees(out side of lawn area), jobs like making of basin at regular interval i/c watering,weeding,prunning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. |
| 173 | Complete maintenance of shrub(out side of lawn area), jobs like making of basin at regular interval i/c watering,weeding,prunning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge |
| 174 | Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. |
| 175 | Fertilizer & pesticide & Tools |
| 176 | Neem oil cake(50 kg pack) |
| 177 | Godabari Gold(50 kg Bag) |
| 178 | PVC Pipe of Oriplast make Please Enable Macros to View BoQ information |
