|
| 1 | P/E/C Open well Submersible pump with control panel at Pentakli Jackwell. |
| 2 | Vertical Openwell Submersible Pump, capable to discharge 800 LPM at 138 Mtrs. total Head , 1400 LPM at 114 Mtrs total Head, 1800 LPM at 94 Mtrs. total Head, 6 Stages, 45 KW / 60 HP, 150 mm discharge outlet, 2900 RPM, 415 V., 3 Phase, 50 Hz. Supply system having Bronze Impeller |
| 3 | Control Panel consisting of 3 pole MCCB, Fully Automatic Star Delta Starter with Power Contactor, Thermal overload relay, Timer, Current operated Motor protection Relay, Digital Voltmeter & Ammeter, Phase Indicating Lamp, On/ Off Indication Control Fuses etc. |
| 4 | Providing and supplying 150 mm dia MS column pipe of 6 mm thickness in 1.5 m length or as per site requirement, including necessary fasteners, complete. |
| 5 | Providing and supplying 150 mm dia joints complete with rubber gaskets and fasteners, suitable for pipeline connections, complete. |
| 6 | 5) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 7 | Supplying, erecting,testing and commissioning of flat flexible 3 core 16 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 8 | Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16)(150 mm.) |
| 9 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement - PN -1.6 150 mm |
| 10 | 9) Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)a) Lowering,laying and jointing in position followingC.I.D/F Reflex valves, Butterfly valves and Sluice valves 150 mm. |
| 11 | Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG Please Enable Macros to View BoQ information |