|
| 1 | Thermal Insulation works pertaining to Boiler and its auxiliaries |
| 2 | Providing new Insulation with refixing of old cladding in Boiler Furnace Area. Insulation (Type: Rock Wool Felt, Thickness-200mm) Netting: GI, Cladding (Old Corrugated sheet) |
| 3 | Providing new Insulation with new cladding in Boiler Furnace Area. Insulation (Type: Rock Wool Felt, Thickness-200mm) Netting: GI, Cladding (Corrugated Al. Sheet, Thickness: 1.2 mm) |
| 4 | Providing New Insulation with refixing of old cladding in Boiler Furnace Wind Box and APH Area. Insulation (Type: Rock Wool Felt, Thickness-200mm) Netting: GI, Cladding (Old Corrugated sheet) |
| 5 | Providing New Insulation with New Cladding in Boiler Furnace Wind Box and APH Area. Insulation (Type: Rock Wool Felt, Thickness-190 mm) Netting: GI, Cladding (Corrugated Al. Sheet, Thickness: 1.2 mm) |
| 6 | Providing New Insulation with refixing of old cladding in Drum DownComers pipers 24 to 80 m elevation, ring header including man holes of ring header at 9 meter elevation, main steam to PRDS line, main steam line and ID fan area. Insulation (Type: Rock Wool Felt, Thickness-150 mm) Netting: GI, Cladding (Old plain sheet) |
| 7 | Providing New Insulation with new cladding in Drum Down-Comers pipers 24 to 80 m elevation, ring header including man holes of ring header at 9 meter elevation, main steam to PRDS line, main steam line and ID fan area. Insulation (Type: Rock Wool Felt, Thickness-150 mm) Netting: GI, Cladding (Al. Sheet, Thickness: 0.56 mm) |
| 8 | Providing New Insulation with refixing of old Cladding in Bottom of Zpanel at 9 meter elevation and ESP Hopper area. Insulation (Type: Rock Wool Felt, Thickness-150 mm) Netting: GI, Cladding (Old Corrugated sheet) |
| 9 | Providing New Insulation with new cladding in Bottom of Z-panel at 9 meter elevation and ESP Hopper area. Insulation (Type: Rock Wool Felt, Thickness-190 mm) Netting: GI, Cladding (Corrugated Al. Sheet, Thickness: 1.2 mm) |
| 10 | Providing New Insulation with new cladding in Fuel Oil Lines/after Vent/Drain line valve i.e. Drum Vent, CBD Drain (Left and Right) and Vent, LTSH Drain line and Ring Header Drain Valve area. Insulation (Type: Rock Wool Felt, Thickness-50 mm) Netting: GI, Cladding (Al. Sheet, Thickness: 0.56 mm) |
| 11 | Filling Inside Cover Plates. Providing only new Insulation in Burner Panel area. Insulation (Type: Rock Wool Felt, Thickness-120 mm) Netting: GI. |
| 12 | Providing New Insulation with New Cladding in Vent/Drain i.e. Drum Vent, CBD Drain (Left and Right), SH Spray Line and Vent, LTSH Drain line and Ring Header Drain Valve area. Insulation (Type: Rock Wool Felt, Thickness-100 mm) Netting: GI. Cladding (Al. Sheet, Thickness: 0.56 mm) |
| 13 | Providing New Insulation with New Cladding in Primary and secondary Hot Air Duct at, 6 M to 30 M elevation area. Insulation (Type: Rock Wool Felt, Thickness-170 mm) Netting: GI. Cladding (Corrugated Al. Sheet Thickness: 1.2 mm) |
| 14 | Providing New Insulation with refixing of old cladding in Primary and secondary Hot Air Duct at , 6 M to 30 M elevation area. Insulation (Type: Rock Wool Felt, Thickness-170 mm) Netting: GI. Cladding (Old Corrugated Sheet) |
| 15 | Providing New Insulation with New Cladding in Flue Gas Duct area. Insulation (Type: Rock Wool Felt, Thickness-40 mm) Netting: GI. Cladding (Corrugated Al. Sheet Thickness-1.2 mm ) |
| 16 | Providing New Insulation with refixing of old cladding in Flue Gas Duct area. Insulation (Type: Rock Wool Felt, Thickness-40 mm) Netting: GI. Cladding (Old Corrugated Sheet) |
| 17 | Providing New Cladding sheet on existing insulation in any area boiler/ hot duct/cold duct/wind box/ ESP hopper /ESP duct. Cladding (Corrugated Sheet Al Thickness: 1.2 mm) |
| 18 | Providing New Cladding sheet on existing insulation in Any area line of vent/drain/main steam line/ bottom Ring Header line. Cladding (Al. Sheet Thickness: 0.56 mm) |
| 19 | Refixing of Old cladding Sheet in any of the area pertaining to Boiler and its auxiliaries. Cladding (Old Corrugated/ plain sheet) |
| 20 | Thermal Insulation works pertaining to Turbine and its auxiliaries |
| 21 | Alumina silicate Felt with refractory plaster, Thickness:200 mm |
| 22 | Alumina silicate Felt with refractory plaster, Thickness:160 mm |
| 23 | refractory plaster, Thickness:20 mm |
| 24 | Alumina silicate Felt, Insulation Thickness-200 mm ,Al sheet Thickness:0.71 mm |
| 25 | Alumina silicate Felt, Insulation Thickness-150 mm ,Al sheet Thickness:0.71 mm |
| 26 | Alumina silicate Felt ,Thickness 120 mm ,Al sheet Thickness:0.71 mm |
| 27 | Alumina silicate Felt ,Thickness 100 mm ,Al sheet Thickness:0.71 mm |
| 28 | Alumina silicate Felt ,Thickness 80mm ,Al sheet Thickness:0.71 mm |
| 29 | Alumina silicate Felt ,Thickness 50 mm ,Al sheet Thickness:0.71 mm |
| 30 | Rock Wool felt ,Insulation Thickness 160 mm,Al sheet Thickness:0.71 mm |
| 31 | Rock Wool felt ,Insulation Thickness120 mm ,Al sheet Thickness:0.71 mm |
| 32 | Rock Wool felt,Insulation Thickness 100 mm,Al sheet Thickness:0.71 mm |
| 33 | Rock Wool felt ,Insulation Thickness 80 mm ,Al sheet Thickness:0.71 mm |
| 34 | Rock Wool felt , Insulation Thickness 50 mm ,Al sheet Thickness:0.71 mm |
| 35 | Cladding Please Enable Macros to View BoQ information |
