|
| 1 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.Ssheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. |
| 2 | Providing and fixing AC- 4wooden flooring of tongued and grooved joint complete job (make pergo or action tesa) |
| 3 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 4 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete: Semi rigid pipe. 32 mm dia |
| 5 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour19.65.2 15 mm nominal bore with 45 cm length. |
| 6 | Providing and fixing Health faucet including all necessary fitting. Complete job. (make jaquar) |
| 7 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 8 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 9 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: 18.21.1 White solid plastic seat with lid. |
| 10 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 11 | Suppling/providing/fixing of Polyester vertical blinds/ curtains of superior quality including cost of material , labour , carriage etc complete job. Note:- The sample of Vertical blind shall be approved from the competent authority of the hospital before execution of work. |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Seecond class deodar wood |
| 13 | Supplying/Providing/Fixing of (ISI Certified brand) Standard size 12mm thick water proof ply of superior quality incl. cost of material, labour,carriage etc complete.Green/Century ) complete job. |
| 14 | Supplying/Providing/Fixing of (ISI Certified brand) Standard size 19mm thick water proof ply of superior quality incl. cost of material, labour,carriage etc complete.Green/Century ) complete job. |
| 15 | Supplying/Providing/Fixing of 1mm thick mica of superior quality incl. cost of material, labour,carriage etc complete.The colour of mica shall be approved from competent authority. |
| 16 | Supplying/ providing/ fixing of Executive chairs of superior quality including cost of material, labour, carriage complete job. ( Godrej only ) |
| 17 | Polishing on wood work with ready mixed wax polish of approved brandand manufacture on New work |
| 18 | Providing and fixing bright finished brass handles with screws etc. complete :125 mm |
| 19 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 20 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 21 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:4:8 or leaner mix (i/c equivalent design mix) |
| 22 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 23 | Supplying/providing/laying of dry brick bat in sunken portion including cost of labour, material etc. complete job. |
| 24 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 25 | Supplying/Providing/Fixing of P.V.C Pipe of superior quality including cost material, labour etc complete.(Finolex/Supreme) |
| 26 | 75mm diameter |
| 27 | 100mm 6Kg pressure |
| 28 | 150mm |
| 29 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Providing and fixing wall mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 32 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 33 | Supplying/Providing/ Fixing of P.V.C. fluted panels of superior quality including cost of material, labour ,wastage etc All complete. Note. The sample of p.v.c fluted panel shall be approved from the competent authority of the hospital. |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete11.52.2 Size of tile 600x600 mm |
| 35 | Supplying / providing / fixing of C. P phase of superior quality including cost of material, labour, carriage etc. complete job.(jaquar) |
| 36 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer- in-charge. (Cost of aluminum snap beading shall be paid in basic item.)22.3.2With float glass panes of 5.0 mm thickness (weight not lessthan 12.50 kg / sqm) |
| 37 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portionPowder coated aluminum (minimum thickness of powder coated 50 microns) |
| 38 | 22.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 39 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls whereverrequired:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mmCP Brass single hole basin mixer |
| 43 | sewer man engaging for cleaning blockage of manhole |
| 44 | Supplying/ providing/ fixing of PVC door bend 6\\" of superior quality. Complete job. |
| 45 | Supplying/ providing/ fixing of PVC door bend 4\\" of superior quality.Complete job. |
| 46 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 47 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 48 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 49 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound) content less than 50 grams/ liter, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour. Two coats |
| 50 | Supplying/Providing/ Fixing of P.V.C. paneling of superior quality including cost of material, labour ,wastage etc All complete. Note. The sample of p.v.c fluted panel shall be approved from the competent authority of the hospital. Please Enable Macros to View BoQ information |
