|
| 1 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 2 | Supply only Chain link MS galvanisd fencing, 50 mm x 50 mm x 4 mm size or type complete all as specified and directed |
| 3 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 4 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.Note: Each line wire to be measured. |
| 5 | Restraining resecuring including making good staples etc. Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: Each line wire to be measured. |
| 6 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over steel surfaces including preparation of new surfaces complete all as specified and directed. |
| 7 | S&F welded steel wire fabric weight not exceeding 4 kg per Sqm to wood or steel members complete all as specified and directed. |
| 8 | Fixing only welded steel wire fabric weight not exceeding 4 kg per Sqm to wood or steel members complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 9 | S&F in repairs GI concertina coil fencing with punched tape concertina coil 610 mm dia 10 m openable length (total length 90 m) having 50 nos rounds / turns per 6 m length, spring core wire (2.5 mm thick) of high tensile strength of 165 Kg / Sqmm with tape (0.52 mm thick) and weight 43.478 gm/m and fixing the same with existing Y-shaped MS angle with GI staple to retain horizontal, including necessary bolts complete all as specified. |
| 10 | Demolition of brick work/ PCC block / stone walls built in cement mortar including all quoins, arches, pillars and removing the debris/ rubbish to a distance not exceeding 100 mtr complete all as specified and directed. |
| 11 | M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed. |
| 12 | All as per Sl No. 11.00 here-in-before, but except stones complete all as specified and directed. |
| 13 | M&L for flush pointing in cement mortar 1:4 to block in course or ashlar masonry or concrete block walling complete all as specified and directed. |
| 14 | M&L for pre-cast cement concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 15 | All as per Sl No. 14.00 here-in-before, but except blocks/ slabs set in CM 1:6 materials complete all as specified and directed. |
| 16 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping, including necessary form work as required complete all as specified and directed. |
| 17 | M&L for rendering in two layers 10mm thick with cement mortar (1:6) as under coat and 5 mm thick with cement mortar (1:4) as finishing coat, finishing coat mixed with water proofing compound @ 3% by the weight of cement on fair faces of brick work even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 18 | Supply only integral water proofing compound complete all as specified and directed. |
| 19 | Dismantling structural steel work including doors, gates and posts, etc complete all as specified and directed |
| 20 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 21 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6mm thick plywood and fixed to wooden plugs with CP brass screw and cup washers, with and including aluminium edging around of mirror complete all as specified and directed. |
| 22 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed. |
| 23 | S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy, fancy type with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 24 | S&F in repairs Vitreous China urinal, half stall pattern, white, including connections to flushing pipe and outgoing pipes (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 25 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 26 | S&F in repairs brass, chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel/ PVC pipe or union complete all as specified and directed. |
| 27 | S&F in repairs bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipe/ PVC pipe or for brass ferrule, complete all as specified and directed. |
| 28 | S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm including brackets, PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 29 | S&F in repairs PVC connections 15mm size, 600mm length with 02 Nos brass check nuts with washer etc complete all as specified and directed. |
| 30 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 31 | S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with provision of lime concrete bedding complete all as specified and directed. |
| 32 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 33 | M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 34 | M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surfaces channels, drains including all necessary form work completed all as specified and directed |
| 35 | M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/ stopped ends etc complete all as specified and directed. |
| 36 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 37 | M&L for coloured & polished chequered cement concrete tiles 20cmx 20cmx25mm/ 30cmx30cmx 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey pigment cement and pigments, including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 38 | M&L for 75 mm thick cement 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and finishing cement concrete surfaces even and smooth without using extra cement with and including all necessary form work complete all as all as specified and directed. |
| 39 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as all as specified and directed. |
| 40 | M&L for precast cement concrete 1:2:4 type B1, using 20mm graded stone aggregate as in manhole / Gully trap cover slab set in CM 1:6 including use and waste of necessary form work complete all as specified and directed. |
| 41 | S&F TMT steel bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 42 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 43 | S&F in repairs stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions or fixed for 15mm bore dia of pipe complete all as specified and directed. |
| 44 | S&F in repairs stop valve, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions or fixed for 20mm bore dia of pipe complete all as specified and directed. |
| 45 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 46 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 47 | Refixing old 15 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 48 | Refixing old 20 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 49 | S&F 15mm bore UPVC pipes as per ASTM-1784 Sch 80 class III, pressure rating 10 Kgf/ Sqm and all fittings fixed complete to walls, ceiling or in floors etc, complete all as specified and directed. |
| 50 | S&F 20mm bore UPVC pipes as per ASTM-1784 Sch 80 class III, pressure rating 10 Kgf/ Sqm and all fittings fixed complete to walls, ceiling or in floors etc, complete all as specified and directed. |
| 51 | S&F in repairs Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top), double layered, hoisted and fixed in position all as specified in SSR Part I including Ball valve 20 mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed. |
| 52 | S&F in repairs Rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top), double layered, hoisted and fixed in position all as specified in SSR Part I including Ball valve 20 mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed. |
| 53 | S&F in repairs Gun-metal, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 54 | S&F in repairs vitreous china wash down water closet pan S and P trap (pedestal pattern), white including fixing bolt, plastic water closet seat, white, or black colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc complete all as specified and directed. |
| 55 | S&F in repairs for PVC (SWR) floor trap 75mm outlet dia., plain with grating including jointing with solvent cement and removing old trap and making good to floor complete all as specified and directed. |
| 56 | S&F in repairs PVC connections 15mm size, 450mm length with 02 Nos brass check nuts with washer etc complete all as specified and directed. |
| 57 | S&F in repairs mild steel chromium plated grating 100 mm dia. complete all as specified and directed. |
| 58 | S&F in repairs 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, wash basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 59 | S&F in repairs 40 mm dia waste fittings, brass, chromium plated for glazed ware sinks, wash basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 60 | S&F in repairs 32mm dia PVC flexible waste pipe 90 cm long with union for urinal, WHB, sink complete all as specified and directed. |
| 61 | S&F in repairs 40mm dia PVC flexible waste pipe 90 cm long with union for urinal, WHB, sink complete all as specified and directed. |
| 62 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 63 | Demolition and breaking up 150 mm internal dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 64 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 65 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified and directed. |
| 66 | S&F in repairs PVC (SWR) bends any radius for 75mm bore dia pipe complete all as specified and directed. |
| 67 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 68 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified and directed. |
| 69 | S&F in repairs PVC (SWR) bends any radius for 110mm bore dia pipe complete all as specified and directed. |
| 70 | S&F in repairs 100 mm bore cast iron cowl complete all as specified and directed. |
| 71 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. from water tank capacity exceeding 250 ltrs and not exceeding 500 ltrs complete all as specified and directed. |
| 72 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 73 | S&F in repairs plastic water closet seat, any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 74 | Taking down and refixing WHB or sink of any size using new rack bolts/ brackets in same locations complete all as specified and directed. |
| 75 | S&F suitable sizes of spindle/ internal fittings suitable for all types of existing taps and valves (Bib taps/ Angle valves/ stop valves) complete all as specified and directed. |
| 76 | S&F in repairs PVC siphon with handle, with internal fittings complete for low level flushing cistern complete all as specified and directed. |
| 77 | S&F in repairs brass chromium plated mixer for mixing hot and cold water screwed down for 15mm bore dia. iron pipe complete all as specified and directed. |
| 78 | S&F in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule for 15mm bore dia. pipe complete all as specified and directed. |
| 79 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 80 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 81 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/ steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 82 | M&L for 450x 300x 7 mm thick glazed ceramic coloured tiles in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10 mm thick screed bed in cement mortar 1:3 on stone/ brick masonry/ concrete surfaces complete all as specified and directed. |
| 83 | M&L for 300x 200x 7 mm thick glazed ceramic coloured tiles in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10 mm thick screed bed in cement mortar 1:3 on stone/ brick masonry/ concrete surfaces complete all as specified and directed. |
| 84 | Taking down wooden chowkats or frames with shutters not exceeding 1.5 sq.m each (without taking off shutters from the frame) complete all as specified and directed. |
| 85 | Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each and refixing in same opening by making good complete all as specified and directed. |
| 86 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 87 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 88 | S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 89 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel all as specified and directed. |
| 90 | S&F 150mm size aluminium handles, cast type, anodised, all as specified and directed. |
| 91 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 92 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 93 | Taking down of cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 94 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall, mixed with integral water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement all as specified and as directed.Note:-WPC will be measured and paid separately as supply only. |
| 95 | M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling finished fair and even complete all as specified and directed. |
| 96 | M&L for rendering 15 mm thick cement plaster on fair faces of brick work/ concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 97 | M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed. |
| 98 | M&L for applying two coats of white wash on ceiling, including preparation of new plastered surfaces complete all as specified and directed. |
| 99 | M&L for applying three coats of white wash on walls, including preparation of new plastered surfaces complete all as specified and directed. |
| 100 | M&L for stainless steel soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 101 | S&F in repairs PVC mirror cabinet of size 450 x 300 x 100 mm, approved colour, fixed to walls complete all as specified and directed. |
| 102 | S&F PVC ventilator fixed type with solid frame of size 70mm x 45mm including louvers, frosted glass 3mm thickness, including MS guard bars of 10mm dia spacing 150 mm C/C and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with PVC beading including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to steel surfaces. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, including taking down the existing ventilator in any description complete all as specified and directed. |
| 103 | S&F in repairs plumbing UPVC ASTM-1784 Sch-8 fittings 15/ 20 mm like elbows/ sockets/ nipple any length, T-sec etc as required at site for serviceable of existing water line complete all as specified and directed. |
| 104 | Fixing only bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for 15mm bore dia iron pipe/ PVC pipe or for brass ferrule, complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 105 | Fixing only pillar taps of size 15mm bore dia, cast copper alloy, fancy type with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 106 | Fixing only stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions or fixed for 15mm bore dia of pipe complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 107 | Fixing only 32/ 40 mm dia waste fittings, brass, chromium plated for glazed ware sinks, wash basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 108 | Fixing only Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Note : Item will be issued under Schedule B Store. |
| 109 | Fixing only Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Ball valve 20 mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 110 | Fixing only Rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Ball valve 20 mm bore dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 111 | Fixing only brass, chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel/ PVC pipe or union complete all as specified and directed. Note : Item will be issued under Schedule B Store. |
| 112 | Fixing only brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 113 | Fixing only 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 114 | Fixing only mild steel chromium plated grating 100 mm dia. complete all as specified and directed.Note : Item will be issued under Schedule B Store. |
| 115 | Fixing only brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.Note : Item will be issued under Schedule B Store. Please Enable Macros to View BoQ information |
