|
| 1 | Earth work in excavation /mud cleaning for nalla contruction in comp.position |
| 2 | Disposal of mud from siteup to 3.0km lead |
| 3 | DEWATERING |
| 4 | Cc in (1:4:8) in nalla bed with 4cm gauge b/ballast cement c/sand in comp.position (s.i-281) |
| 5 | Rcc work in (1:1;5;3) mortar in plinth beam with 2cm gauge stone grit cement c/sand including all material labour tools etc in comp.position DSR 2023 SI NO 5.2.2 |
| 6 | Reinforcement and its bending but excluding its fixing and bending centring and shuttering including all material labour tools etcin comp position (s.i-504) |
| 7 | Dismentling reinforced cement concrete or reinforced brick work including stacking of material as directed by the engineer in charge s.i 694 |
| 8 | providing laying spreading and compation creased stone aggregate of 22.4-53 mm size to water bond macadam specifiction including spreading in uniform thickness hand packing rolling with 3 wheeled 8-10 Ton roller in stage to proper grade and camber in comp position |
| 9 | Contruction of un-reinforced,dowel jointed at expansion and contruction joint only ,plain cement concrete pavement ,thickness as per design ,over a prepared sub-base with 43 grade cement @400kg per cum ,coarse and fine aggregates confirming to IS 383 maxium size of coarse aggregates not exceeding 25mm,mixed in abatching and mixing plant as per approved mix design transported to site laid with a fixed form or slip from paver , spread ,compacted and finished in a continous opration including provision of contruction ,expension contruction and longitudinaten joints ,joint filler ,separatio membrane ,sealant primer ,joint sealent ,debonding strip,dowel bar ,tie rod ,admixtures as approved ,curing compound ,finishing to line and grade as per drawing including 14 days curing in comp .position |
| 10 | M-150 brick work in (1:3) mortar with cement and c/sand in drain in comp.position (s.i-307) |
| 11 | 12 mm thick plaster in( mortar with (1:3)cement and c/sand on brick work in comp position (s.i-582a) |
| 12 | cc work in (1:2:4) mortar with 2cm gauge stone grit cement c/sand in including all material labour tools etc in comp.position (s.i-281) |
| 13 | supply of 80mm thick cc rubber mouid tile I-shape mechanically compressed interloking paver block manufactured by high pressure and control vibration machine having plan dimension 200*(160+120mm)with minium 5mm topping of O.P cement smooth gloss finish .The compressive strength of concrete paver block shall not be less than 40Mpa and 4.5 kg per no.including cost of all material labour T&P etc require for proper completion f of the work (s.i-new item 14) |
| 14 | STEEL WORK WELDED IN BUILT UP SECTIONS / FRAMED WORK INCLUDING CUTTING HOISTING FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER USING STRUCTURAL STEEL ETC AS REQUIRED . IN GRADING FRAMES GUARD BAR LADDER RALLING BRACKETS GATES AND SIMILAR WORKS IN DSR 10.25 .2 Please Enable Macros to View BoQ information |
