|
| 1 | Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : - |
| 2 | LT XLPE Cable 1x630 Sq.mm. |
| 3 | HT DO Fuse Set for the Protection of Different Size DTs |
| 4 | Providing of following material of standard make / best quality for complete the work of DT & other related work with disconnecting & reconnection of cable etc. as per RESSPO norms by the contractor at his own cost : - |
| 5 | GI Flaty Strip 50x6mm. |
| 6 | Al. Crimping Lugs suitable for 1x630 Sq.mm |
| 7 | MS Channel size 100x50x2500mm |
| 8 | Installation / Erection / Fixing of following material for complete the work of DT & other related work with disconnecting & reconnection of cable for DT Metering etc. as per RESSPO norms by the contractor at his own cost : - |
| 9 | GI Flaty Strip 50x6mm. |
| 10 | Al. Crimping Lugs suitable for 1x630 Sq.mm |
| 11 | MS Channel size 100x50x2500mm |
| 12 | LT XLPE Cable 1x630 Sq.mm with lug. |
| 13 | HT DO Fuse Set for the Protection of Different Size DTs |
| 14 | Dismantling & Carriage from work site to store with loading & unloading of Scarp ACB |
| 15 | Providing and installation of LT ACB 630 Amp. (5 Nos.) / LT ACB 800 Amp. (8 No.) with cabinet / structure (L&T, HPL, Schneider, ABB, Hevell's, PVVNL approved make) WITH GUARANTEE PERIOD OF 03 YEARS as per following specification with all relevant certificate :-Note:- A permanent sticker containing the name, address, mobile number, contract number, name of material manufacturer, address, mobile number, date of installation and guarantee period of the contracted working agency will be affixed on the ACB Cabinet by the working agency) |
| 16 | 630 amp. (5 Nos.) / 800 amp. (8 No.) ACB with Earth Fault and Over Current Protection relay (Automatic). |
| 17 | Red/yellow/blue light indication |
| 18 | ON & OFF Indication |
| 19 | Amp., Volt meter& energy meter digital |
| 20 | Metering C.T 630/5A, / C.T 800/5A |
| 21 | Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg. |
| 22 | Fabrication of aluminium bus-bar for each phases |
| 23 | Incoming size 425 mm x 50mmx12 mm (twin) |
| 24 | Out going size 720 mm x 50mm x 12 mm(twin) |
| 25 | Neutral size 900mmx50mmx12 mm. |
| 26 | Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg. |
| 27 | Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & foundation of ACB with grouting in ratio 1:4:8 with cement, coarse sand and brick blast. |
| 28 | Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F. |
| 29 | Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect. |
| 30 | CHEMICAL EARTHING WORK (SUPPLY AND INSTALLATION) AS PER FOLLOWING:-Note :- The all material and labour shall be provided by the contractor with 36 month guarantee for resistance value less than one OHM. |
| 31 | Providing of earthing electrode :-Material Description : GI Electrode, Galvanization : 150 Micron (Min),IS Standard : IS 3043 / IEEE - 837, Short Time Current Rating kA (rms) For 1 Sec : 42 KA For 1 Sec, Dia of Electrode : 50mm, Length of Electrode : 3000mm, Weight of Electrode : 15 Kgm, Pipe Thickness : 4mm or As per IS : 1239 4mm, Inside Filling Material : Crystalline Conductive Mixture, Inner Strip : 3100 X 50 X 6 mm,Terminal Hole Dia : 16 MM. Technology : Metal Thermal Spray (Joints) Protection Earthing Resistance Value in Different Soil Conditions with ERIC Backfill Compound : Normal Soil - Upto 2 Ohms, Sand. Muran Soil - Upto 4 Ohms, Rock Soil - Upto 4 Ohms,Electrode Testing Cetificate : CPRI Testd. Surrounding Filling Material (ERIC):- Product : ERIC (Earth Resitance Improvement Compound), IS Standard : IS 3043/IEEE 837, Chemical Composition : Graphite, Activated Carbon, Bentonite, ETC., Resistivity Value : >0.2 Ohm Per Meter, Melting Temperature : 2500 Degree Centigrade,Specific Gravity : 2.6, PH Value of Chemical : 7-9, Solubility in water : 3.54, Colour : Light cream/Ash, Main Caution ; Sodium, Moisture Capacity at 105 Degree : 10%, Weight of Chemical used / Earthing Pit : 50 Kg, Water Absorbing Capacity : 20 Times, Environmental Effects : Eco Friendly. Test Certifictae : ROHS Certified, Thermal Stability : Testsed, Corrosion Resistance : Tested, Swell Test Certificate : Yes, Ph Value Test Certificate : Yes. Installation Parameter :- Need Hole Dia : 6\\"-8\\" Need Hole Depth : 3 Meter,Guarantee : 36 Month. |
| 32 | Providing and fixing of GI strip of size 50 mm x 6 mm suitable for T/F & Panel. |
| 33 | Providing and fixing of PVC Pit covers for above earthing electrode terminals. |
| 34 | Geo-tagging of complete work as per PVVNL order No. 2259 Dated 21.08.2025 (Letter attached with condition). Please Enable Macros to View BoQ information |
