Tender For 33Kv Switchyard And 11Kv Switchgear Work In Bp 2026-27 Under Eudd 33Kv Stadium And Yeida, Ghaziabad-Uttar Pradesh

TDR : 55684380

Tender Notice
BOQ

15 Days Left

Ghaziabad , Uttar Pradesh

Tender Brief : Tender for 33KV Switchyard and 11KV Switchgear Work in bp 2026-27 Under Eudd 33KV Stadium and Yeida

Document Fees
₹ 3540 /-

EMD
₹ 44470.0 /-

Tender Value
₹ 44.47 Lakhs /-

Submission Date
11-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : -
2	33 KV Pin Insulator
3	Line Isolator 800 A, 33 kv
4	Bus Isolator 800 A, 33 kv
5	33 KV CT, 400/200 1-1-1A
6	33 KV CT, 200/100 1-1-1A
7	33 KV VCB 750 MVA 1250 A
8	33 KV Control Panel Single
9	33 KV Control Panel for Double Transformer
10	33 KV Fuse Set
11	11 KV Fuse Set
12	11 KV Fuse Wire
13	Structure for Cable Support
14	Structure for The Above PT
15	Structure for The Above CT
16	Structure for The Above LA
17	Structure of 33 KV Isolator (125x65x6mm GI Channel)
18	ACSR Panther
19	Lightening Arrester
20	Earthing Complete
21	33 KV PT (Outdoor) 33 KV /110 V
22	Providing of following material of standard make / best quality for complete the work of 33 KV Switchyard & 11 KV Switchgears work with disconnecting & reconnection of cable etc. as per RESSPO norms by the contractor at his own cost : -
23	CT PG Clamp with nut bolt
24	PG Clamp Panther with nut bolt
25	GI Earthing Strip
26	Connector for 33 kv ISOLATOR with nut bolt
27	Brass Bolted Lugs
28	Ferrule
29	Copper Control Cable 4x2.5 sqmm
30	Copper Control Cable 2x2.5 sqmm
31	Heat Shrink Busbar Ins. Tape:50mmx10mtr
32	Copper Busbar 1000mmx50x8 sqmm Strip
33	11 KV PT make Cromption, Pascal, CG, Steel Make, C Sec etc as per site requirement
34	Eyelet Clip with nut bolt
35	MS Nut and Bolt
36	Sunderies Items
37	Holding Clamps with bolts & nuts
38	Trench 1x1 sq ft.
39	Plinth & Foundation for 33 KV VCB
40	Plinth & Foundation for Structure
41	Foundation Plinth of Isolator
42	Fabrication and Foundation of Structure
43	Fabrication, Installation / Erection / Fixing of following material for complete the work of 33 KV Switchyard & 11 KV Switchgears work with disconnecting & reconnection of cable etc. as per RESSPO norms by the contractor at his own cost : -
44	CT PG Clamp with nut bolt
45	PG Clamp Panther with nut bolt
46	GI Earthing Strip
47	Connector for 33 kv ISOLATOR with nut bolt
48	Brass Bolted Lugs
49	Ferrule
50	Copper Control Cable 4x2.5 sqmm
51	Copper Control Cable 2x2.5 sqmm
52	Heat Shrink Busbar Ins. Tape:50mmx10mtr
53	Copper Busbar 1000mmx50x8 sqmm Strip
54	11 KV PT make Cromption, Pascal, CG, Steel Make, C Sec etc as per site requirement
55	Eyelet Clip with nut bolt
56	MS Nut and Bolt
57	Sunderies Items
58	Holding Clamps with bolts & nuts
59	Trench 1x1 sq ft.
60	Plinth & Foundation for 33 KV VCB
61	Plinth & Foundation for Structure
62	Foundation Plinth of Isolator
63	Fabrication and Foundation of Structure
64	33 KV Pin Insulator
65	Line Isolator 800 A, 33 kv
66	Bus Isolator 800 A, 33 kv
67	33 KV CT, 400/200 1-1-1A
68	33 KV CT, 200/100 1-1-1A
69	33 KV VCB 750 MVA 1250 A
70	33 KV Control Panel Single
71	33 KV Control Panel for Double Transformer
72	33 KV Fuse Set
73	11 KV Fuse Set
74	11 KV Fuse Wire
75	Structure for Cable Support
76	Structure for The Above PT
77	Structure for The Above CT
78	Structure for The Above LA
79	Structure of 33 KV Isolator (125x65x6mm GI Channel)
80	ACSR Panther
81	Lightening Arrester
82	Earthing Complete
83	33 KV PT (Outdoor) 33 KV /110 V
84	Dismantling & Refitting of Line PTs with Struc
85	Dismantling & Refitting of Isolator with Struc
86	Dismantling & Reinstallation of Line PTs with Struc with foundation
87	Dismantling & Reinstallation of Isolator PTs Struc with foundation
88	Dismantling & Carriage from work site to store with loading & unloading of 33 KV Bus Isolator (o&u)
89	Dismantling & Carriage from work site to store with loading & unloading of 33 Line Isolator (o&u)
90	Dismantling & Carriage from work site to store with loading & unloading of 33 KV Pole mounted Isolator (o&u)
91	Dismantling & Carriage from work site to store with loading & unloading of 33 KV Isolator Mel Table Scrap (F)
92	Dismantling & Carriage from work site to store with loading & unloading of Old & damage 11 KV PT
93	Dismantling & Carriage from work site to store with loading & unloading of Old & damage 33 KV CT
94	Dismantling & Carriage from work site to store with loading & unloading of Old & damage Control panel
95	Dismantling & Carriage from work site to store with loading & unloading of Burnt and Scrap Control Cable 4x2.5 sqmm (o&u)
96	Dismantling & Carriage from work site to store with loading & unloading of Control Cable 4x2.5 sqmm (o&u)
97	Dismantling & Carriage from work site to store with loading & unloading of Old & Damage Fuse Set
98	CHEMICAL EARTHING WORK (SUPPLY AND INSTALLATION) AS PER FOLLOWING:-Note :- The all material and labour shall be provided by the contractor with 24 month guarantee for resistance value less than one OHM.
99	Providing of earthing electrode :-Material Description : GI Electrode, Galvanization : 150 Micron (Min),IS Standard : IS 3043 / IEEE - 837, Short Time Current Rating kA (rms) For 1 Sec : 42 KA For 1 Sec, Dia of Electrode : 50mm, Length of Electrode : 3000mm, Weight of Electrode : 15 Kgm, Pipe Thickness : 4mm or As per IS : 1239 4mm, Inside Filling Material : Crystalline Conductive Mixture, Inner Strip : 3100 X 50 X 6 mm,Terminal Hole Dia : 16 MM. Technology : Metal Thermal Spray (Joints) Protection Earthing Resistance Value in Different Soil Conditions with ERIC Backfill Compound : Normal Soil - Upto 2 Ohms, Sand. Muran Soil - Upto 4 Ohms, Rock Soil - Upto 4 Ohms,Electrode Testing Cetificate : CPRI Testd. Surrounding Filling Material (ERIC):- Product : ERIC (Earth Resitance Improvement Compound), IS Standard : IS 3043/IEEE 837, Chemical Composition : Graphite, Activated Carbon, Bentonite, ETC., Resistivity Value : >0.2 Ohm Per Meter, Melting Temperature : 2500 Degree Centigrade,Specific Gravity : 2.6, PH Value of Chemical : 7-9, Solubility in water : 3.54, Colour : Light cream/Ash, Main Caution ; Sodium, Moisture Capacity at 105 Degree : 10%, Weight of Chemical used / Earthing Pit : 50 Kg, Water Absorbing Capacity : 20 Times, Environmental Effects : Eco Friendly. Test Certifictae : ROHS Certified, Thermal Stability : Testsed, Corrosion Resistance : Tested, Swell Test Certificate : Yes, Ph Value Test Certificate : Yes. Installation Parameter :- Need Hole Dia : 6\\"-8\\" Need Hole Depth : 3 Meter,Guarantee : 24 Month.
100	Providing and fixing of GI strip of size 50 mm x 6 mm suitable for T/F & Panel.
101	Providing and fixing of PVC Pit covers for above earthing electrode terminals.
102	FOLLOWING WORK OF 2 NOS. DELTA EARTHING (INCLUDED ALL MATERIAL & LABOUR) OF POWER TRANSFORMERS INSTALLED AT VARIOUS 33/11 KV SUBSTATIONS FOR PROTECTION POWER TRANSFORMER :-Note :- The all material and labour shall be provided by the contractor with 24 month guarantee for resistance value less than one OHM.
103	Fabrication of 40mm MS round 1.5 Mtr. long and V shape as per PVVNL / RESPO drawing and connecting them with main earth mat in X and Y MS round bars by excavation of earth, inserting of MS round bars, welding and back filling of earth.
104	Boring with 150mm dia casing pipe to a probable depth of 19.0 meter long from ground level with skilled and unskilled labour including all T&P, boring apparatus and supervision charges etc. required for proper completion of work.
105	Inserting 40x6mm G.I flat in 50 mm dia B-class (JINDAL / TATA) ISI mark 6.0 meter long 3 pipe placed horizontally on ground and bolling the G.I. flat with 150 mm long 75x6 mm copper plate conical piece on and then bolting the G.I. flat with G.I pipe in such a way that copper flat remains in contact with the pipe. Lowering of 6.0 meter long G.I pipe with conical copper plate connected and at bottom along with G.I. flat inside the pipe in boring of 150mm G.I. pipe pieces by G.I. sockets along with 40x6 mm G.I. flat running Inside the pipe by making 150cm lap joints 75mm above ground level. Taking out 40x6 mm G.I. flat the upper end of pipe by making a cut of 45mm wide up to a depth of 50mm in upper portion of G.I. pipe and providing 1 no.cap type G.I. socket on upper threaded portion of pipe for water pouring in the pipe at regular filling the space. all the required material will be proivide by contractor.
106	Excavation of pit of size for formation delta for 1.00M x 1.00 M x 1.00 M. M.S. electrodes of 40mm dia 3.0 Mtr. long in the earth on all the three corner of the pit equal distance of 1.0 Mtr. long keeping the top of electrode 50 cm above the pit ground level, welding of 40 mm M.S. round pieces of required length on all three sides of electrodes. 50x6 mm M.S. flat connecting bore earthing & neutral (HV & LV) of all T/Fs.
107	Geo-tagging of complete work as per PVVNL order No. 2259 Dated 21.08.2025 (Letter attached with condition). Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Electrical Industry Tenders

Circuit Protection Device Tenders

Switch Gear Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For 33Kv Switchyard And 11Kv Switchgear Work In Bp 2026-27 Under Eudd 33Kv Stadium And Yeida, Ghaziabad-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : -
2	33 KV Pin Insulator
3	Line Isolator 800 A, 33 kv
4	Bus Isolator 800 A, 33 kv
5	33 KV CT, 400/200 1-1-1A
6	33 KV CT, 200/100 1-1-1A
7	33 KV VCB 750 MVA 1250 A
8	33 KV Control Panel Single
9	33 KV Control Panel for Double Transformer
10	33 KV Fuse Set
11	11 KV Fuse Set
12	11 KV Fuse Wire
13	Structure for Cable Support
14	Structure for The Above PT
15	Structure for The Above CT
16	Structure for The Above LA
17	Structure of 33 KV Isolator (125x65x6mm GI Channel)
18	ACSR Panther
19	Lightening Arrester
20	Earthing Complete
21	33 KV PT (Outdoor) 33 KV /110 V
22	Providing of following material of standard make / best quality for complete the work of 33 KV Switchyard & 11 KV Switchgears work with disconnecting & reconnection of cable etc. as per RESSPO norms by the contractor at his own cost : -
23	CT PG Clamp with nut bolt
24	PG Clamp Panther with nut bolt
25	GI Earthing Strip
26	Connector for 33 kv ISOLATOR with nut bolt
27	Brass Bolted Lugs
28	Ferrule
29	Copper Control Cable 4x2.5 sqmm
30	Copper Control Cable 2x2.5 sqmm
31	Heat Shrink Busbar Ins. Tape:50mmx10mtr
32	Copper Busbar 1000mmx50x8 sqmm Strip
33	11 KV PT make Cromption, Pascal, CG, Steel Make, C Sec etc as per site requirement
34	Eyelet Clip with nut bolt
35	MS Nut and Bolt
36	Sunderies Items
37	Holding Clamps with bolts & nuts
38	Trench 1x1 sq ft.
39	Plinth & Foundation for 33 KV VCB
40	Plinth & Foundation for Structure
41	Foundation Plinth of Isolator
42	Fabrication and Foundation of Structure
43	Fabrication, Installation / Erection / Fixing of following material for complete the work of 33 KV Switchyard & 11 KV Switchgears work with disconnecting & reconnection of cable etc. as per RESSPO norms by the contractor at his own cost : -
44	CT PG Clamp with nut bolt
45	PG Clamp Panther with nut bolt
46	GI Earthing Strip
47	Connector for 33 kv ISOLATOR with nut bolt
48	Brass Bolted Lugs
49	Ferrule
50	Copper Control Cable 4x2.5 sqmm
51	Copper Control Cable 2x2.5 sqmm
52	Heat Shrink Busbar Ins. Tape:50mmx10mtr
53	Copper Busbar 1000mmx50x8 sqmm Strip
54	11 KV PT make Cromption, Pascal, CG, Steel Make, C Sec etc as per site requirement
55	Eyelet Clip with nut bolt
56	MS Nut and Bolt
57	Sunderies Items
58	Holding Clamps with bolts & nuts
59	Trench 1x1 sq ft.
60	Plinth & Foundation for 33 KV VCB
61	Plinth & Foundation for Structure
62	Foundation Plinth of Isolator
63	Fabrication and Foundation of Structure
64	33 KV Pin Insulator
65	Line Isolator 800 A, 33 kv
66	Bus Isolator 800 A, 33 kv
67	33 KV CT, 400/200 1-1-1A
68	33 KV CT, 200/100 1-1-1A
69	33 KV VCB 750 MVA 1250 A
70	33 KV Control Panel Single
71	33 KV Control Panel for Double Transformer
72	33 KV Fuse Set
73	11 KV Fuse Set
74	11 KV Fuse Wire
75	Structure for Cable Support
76	Structure for The Above PT
77	Structure for The Above CT
78	Structure for The Above LA
79	Structure of 33 KV Isolator (125x65x6mm GI Channel)
80	ACSR Panther
81	Lightening Arrester
82	Earthing Complete
83	33 KV PT (Outdoor) 33 KV /110 V
84	Dismantling & Refitting of Line PTs with Struc
85	Dismantling & Refitting of Isolator with Struc
86	Dismantling & Reinstallation of Line PTs with Struc with foundation
87	Dismantling & Reinstallation of Isolator PTs Struc with foundation
88	Dismantling & Carriage from work site to store with loading & unloading of 33 KV Bus Isolator (o&u)
89	Dismantling & Carriage from work site to store with loading & unloading of 33 Line Isolator (o&u)
90	Dismantling & Carriage from work site to store with loading & unloading of 33 KV Pole mounted Isolator (o&u)
91	Dismantling & Carriage from work site to store with loading & unloading of 33 KV Isolator Mel Table Scrap (F)
92	Dismantling & Carriage from work site to store with loading & unloading of Old & damage 11 KV PT
93	Dismantling & Carriage from work site to store with loading & unloading of Old & damage 33 KV CT
94	Dismantling & Carriage from work site to store with loading & unloading of Old & damage Control panel
95	Dismantling & Carriage from work site to store with loading & unloading of Burnt and Scrap Control Cable 4x2.5 sqmm (o&u)
96	Dismantling & Carriage from work site to store with loading & unloading of Control Cable 4x2.5 sqmm (o&u)
97	Dismantling & Carriage from work site to store with loading & unloading of Old & Damage Fuse Set
98	CHEMICAL EARTHING WORK (SUPPLY AND INSTALLATION) AS PER FOLLOWING:-Note :- The all material and labour shall be provided by the contractor with 24 month guarantee for resistance value less than one OHM.
99	Providing of earthing electrode :-Material Description : GI Electrode, Galvanization : 150 Micron (Min),IS Standard : IS 3043 / IEEE - 837, Short Time Current Rating kA (rms) For 1 Sec : 42 KA For 1 Sec, Dia of Electrode : 50mm, Length of Electrode : 3000mm, Weight of Electrode : 15 Kgm, Pipe Thickness : 4mm or As per IS : 1239 4mm, Inside Filling Material : Crystalline Conductive Mixture, Inner Strip : 3100 X 50 X 6 mm,Terminal Hole Dia : 16 MM. Technology : Metal Thermal Spray (Joints) Protection Earthing Resistance Value in Different Soil Conditions with ERIC Backfill Compound : Normal Soil - Upto 2 Ohms, Sand. Muran Soil - Upto 4 Ohms, Rock Soil - Upto 4 Ohms,Electrode Testing Cetificate : CPRI Testd. Surrounding Filling Material (ERIC):- Product : ERIC (Earth Resitance Improvement Compound), IS Standard : IS 3043/IEEE 837, Chemical Composition : Graphite, Activated Carbon, Bentonite, ETC., Resistivity Value : >0.2 Ohm Per Meter, Melting Temperature : 2500 Degree Centigrade,Specific Gravity : 2.6, PH Value of Chemical : 7-9, Solubility in water : 3.54, Colour : Light cream/Ash, Main Caution ; Sodium, Moisture Capacity at 105 Degree : 10%, Weight of Chemical used / Earthing Pit : 50 Kg, Water Absorbing Capacity : 20 Times, Environmental Effects : Eco Friendly. Test Certifictae : ROHS Certified, Thermal Stability : Testsed, Corrosion Resistance : Tested, Swell Test Certificate : Yes, Ph Value Test Certificate : Yes. Installation Parameter :- Need Hole Dia : 6\\"-8\\" Need Hole Depth : 3 Meter,Guarantee : 24 Month.
100	Providing and fixing of GI strip of size 50 mm x 6 mm suitable for T/F & Panel.
101	Providing and fixing of PVC Pit covers for above earthing electrode terminals.
102	FOLLOWING WORK OF 2 NOS. DELTA EARTHING (INCLUDED ALL MATERIAL & LABOUR) OF POWER TRANSFORMERS INSTALLED AT VARIOUS 33/11 KV SUBSTATIONS FOR PROTECTION POWER TRANSFORMER :-Note :- The all material and labour shall be provided by the contractor with 24 month guarantee for resistance value less than one OHM.
103	Fabrication of 40mm MS round 1.5 Mtr. long and V shape as per PVVNL / RESPO drawing and connecting them with main earth mat in X and Y MS round bars by excavation of earth, inserting of MS round bars, welding and back filling of earth.
104	Boring with 150mm dia casing pipe to a probable depth of 19.0 meter long from ground level with skilled and unskilled labour including all T&P, boring apparatus and supervision charges etc. required for proper completion of work.
105	Inserting 40x6mm G.I flat in 50 mm dia B-class (JINDAL / TATA) ISI mark 6.0 meter long 3 pipe placed horizontally on ground and bolling the G.I. flat with 150 mm long 75x6 mm copper plate conical piece on and then bolting the G.I. flat with G.I pipe in such a way that copper flat remains in contact with the pipe. Lowering of 6.0 meter long G.I pipe with conical copper plate connected and at bottom along with G.I. flat inside the pipe in boring of 150mm G.I. pipe pieces by G.I. sockets along with 40x6 mm G.I. flat running Inside the pipe by making 150cm lap joints 75mm above ground level. Taking out 40x6 mm G.I. flat the upper end of pipe by making a cut of 45mm wide up to a depth of 50mm in upper portion of G.I. pipe and providing 1 no.cap type G.I. socket on upper threaded portion of pipe for water pouring in the pipe at regular filling the space. all the required material will be proivide by contractor.
106	Excavation of pit of size for formation delta for 1.00M x 1.00 M x 1.00 M. M.S. electrodes of 40mm dia 3.0 Mtr. long in the earth on all the three corner of the pit equal distance of 1.0 Mtr. long keeping the top of electrode 50 cm above the pit ground level, welding of 40 mm M.S. round pieces of required length on all three sides of electrodes. 50x6 mm M.S. flat connecting bore earthing & neutral (HV & LV) of all T/Fs.
107	Geo-tagging of complete work as per PVVNL order No. 2259 Dated 21.08.2025 (Letter attached with condition). Please Enable Macros to View BoQ information

Tender For 33Kv Switchyard And 11Kv Switchgear Work In Bp 2026-27 Under Eudd 33Kv Stadium And Yeida, Ghaziabad-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us