|
| 1 | Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EE ESD Ayodhaya to dump site proper stacking. |
| 2 | PCC 11 Mtr. |
| 3 | PCC 9.0 Mtr. |
| 4 | STP 13.0 Mtr. |
| 5 | M.S. Top Channel 125x65 mm 3200 mm |
| 6 | M.S. Angle 65x65x6 mm Bracing, 4300 mm |
| 7 | Dropper Channel 125x65 mm 3200 mm |
| 8 | MS Angle for guarding 65x65x6 mm, 3500 mm long |
| 9 | GI Wire 8 SWG |
| 10 | GI Wire 6 SWG |
| 11 | 33 KV V-TYPE CROSS ARM |
| 12 | 33 KV Disc Insulator B & S Type polymer 70 kn |
| 13 | 33 KV Pin Insulator polymer type |
| 14 | Stay Wire 7/8 SWG |
| 15 | Cost of ACSR Dog Conductor |
| 16 | Cost of 33 KV 3x300 sq mm XLPE Cable |
| 17 | 33 KV Outdoor jointing Kit for 3x300 sq mm XLPE Cable |
| 18 | 33 KV S/T Jointing kit 3x300 xlpe cable |
| 19 | M.S. Channel 125x65x6 |
| 20 | M.S. Angle 75x75x6 |
| 21 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 No. Channel Cross Arm, Pin Insulator , 6 SWG wire etc as per norms. (Contractor shall provide 3 Nos. 33 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers etc.) |
| 22 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 11 MtrPCC Pole with fitting of necessary clamp & other acessories like 1 No. Channel Cross Arm, Pin Insulator , 6 SWG wire etc as per norms. (Contractor shall provide 3 Nos. 33 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers etc.) |
| 23 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Four pole for 33 KV Line on 11.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 4 No. Top channel of 125x65x6 mm size 3200 mm, Disc Fitting 6 No. Bracing angle 4 set, 6 No. 33 kv Polymer disc insulator B &S , Polymer Pin insulator 09 No. as per norms. (Contractor shall provide , E- Bracket ,P.G clamp, necessary clamps, P.G clamp ,Disc Fitting, F-clamp , Nut - Bolts washers if required etc. ) |
| 24 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection for Expoure Double pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 3 No Top channel of 125x65x6 mm size 3200 mm . , Bracing angle 1 set., and 9 No. Pin insulator as per norms. (Contractor shall provide all necessary clamps, Nut - Bolts&washer and e-bracket if required etc) |
| 25 | Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 13 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 No. Channel Cross Arm, Pin insulator, 6 SWG Wire etc as per norms. (Contractor shall provide 3 Nos. 33 KV G.I. Pin, necessary clamps, F-brackets, Nut - Bolts, Washers etc.) |
| 26 | Earthing of PoleEarthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod, 6 swg wire, Earthing clamps and nut & bolt etc.) |
| 27 | Cradle Guarding of 33 KV line at road crossing, canal/telephone line crossing by fixing Guarding Angle 65x65x6 mm, 3500 mm at double pole and 2600 mm long at single pole by stringing and sagging of 3 No. G.I.wire with lacing and tightening with mounting. (Contractor shall provide Necessary clamps for fitting of guarding angle and 6 No. Eye hook&bolt 12x110 mm etc.) |
| 28 | Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase of 33 KV Line including fixing, mounting of P.G.clamp suitable for Dog Conductor at sectional point. (Contractor shall provide necessary PG clamps etc) |
| 29 | Laying & Dressing of 3x300 sq. mm XLPE Cable underground Double Circuit.Laying of double circuit 3x300 sq .mm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required materials, as 1st class Bricks, Stone slabs and fine sand. Providing 150 mm fine sand cusion beneath, and 150 mm sand cusion above the cable. The cable shall be duly protected by Bricks, sand and stone slab. The inter axial spacing between two cables should be in between 0.25 to 0.04 M. After laying the cable refilling and ramming of the left out soil,closing the trench and leveling. |
| 30 | Installation of Heat Shrinkable Type cable jointing kits of following types/sizes for 33 XLPE Cable. |
| 31 | (a) Fixing of 33 KV 3x300 sq. mm Straight Through joints. (jointing kit supplied by dept.) |
| 32 | (b) Fixing of 33 KV 3x300 sq. mm Outdoor End Terminations (jointing kit supplied by dept.) |
| 33 | Angle for Cross arm Support at Angle Location 65x65x6 mm 1600 mm long with clamps and nut & bolt. (All materials will be supplied by the contractor) |
| 34 | Nozeling and grouting of stay set. (All the civil material and stay set, clamp and stay insulator etc will be arranged by the contractor except Stay wire) |
| 35 | Nozeling and grouting of stay at sectional pole and extra stay sets at angle locations (All the civil material and stay set, stay clamp, stay insulator etc.will be arranged by the contractor except stay wire) |
| 36 | High Pressure testing to which 33 KV Line & cable to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor) |
| 37 | Cable stand StructureFabrication & erection of 33 KV Cable Stand made of 02 No. M.S chanel 125x65x6 mm 3 Mtr. Jointed to each other by M.S Channel horizontally and also jointed to each other by means of 05 No. M.S Strip (m.s flat) 50x6 mm of size 200 mm long each by welding at actual distance interval as per norms. And grouting in block of 300x300x700 completely providing 02 no. cable clamps also and eathing by G.I strip 50x6 mm size with the earth mat of switchyard both side of legs and provideing clamps , post/ pin insulator for holding cable. (All the materials will be arranged by the contractor such that clamps nut bolts and civil materials except M.S channel.) |
| 38 | Hoisting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping, providing long barral lugs 6 nos and P.G. Clamps & \\"Y\\" shape jumpering properly and 02 nos. supporting angle 65X65X6, 2240 mm long and making connection including supply of jumpering cable ,mounting clamps as per RESSPO Norms. (All material will be supplied by the contractor like M.S Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65X65X6, 2240 mm and jumpering cable suitable for 33 KV jumper). |
| 39 | Hoisting of 33 KV Cable on existing/erected support on 33 kv cable stand by using clamp with nut bolt and suitble size of G.I. pipe. (All material will be supplied by the contractor like G.I Pipe ,P.G. Clamps, Al. Lug And and jumpering cable suitable for 33 KV jumper). |
| 40 | Grouting of following structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9.0 Mtr PCC / 11 Mtr STP respectively, placing stone pad at bottom 450x450 size foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.268/0.285 cu mtr for 9.0 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering. |
| 41 | 11 Mtr PCC Poles |
| 42 | 9.0 Mtr PCC Poles |
| 43 | 13 Mtr ST Poles |
| 44 | Supply and fixing of a stone pad of size 300x300x75 mm at PCC/STP Bottom of the pit ( Contractor shall provide all materials) |
| 45 | Fixing of barbed wire on poleSupply and fixing of barbed wire on the pole above 2750 mm ground level. Barbed wire wrapped for a distance of 0.9 mtr. with a pitch of 13.mm at a height. (All materials supplied by the contractor) |
| 46 | Fixing of Danger board .Supply and fitting of Danger board of size 250x200x2 mm 3650 mm above ground level as per Respo norms. RESPO Drawing No-55 |
| 47 | Fixing of Number plate .Supply and fitting of Number plate of size 250x200x2 mm 3650 mm above ground level as per Respo norms. RESPO Drawing No-55 |
| 48 | Fabrication, Erection and grouting of route marker and marking 33 KV line by painting after grooving on the stone. (Contractor shall provide all materials) |
| 49 | Providing of HDPE 6\\"Dia Pipe PN-6 Specification |
| 50 | Laying of cable & HDPE PipeLaying of Double circuit 33 KV 3x300 Sq mm XLPE cable and HDPE Pipe by drilling method below NHAI road crossing. The cable be laid at the depth of 3 mtr from the under surface in HDPE pipe (200 mm. dia.) casing. |
| 51 | Laying of cable Through HDD MethodLaying of Double circuit 33 KV 3x300 Sq mm XLPE cable through HDD method . |
| 52 | NOC will be granted from Central/ state Electrical safety department.( Final settlement of the payment will be done after providing receipt, agreement and permission paper). |
| 53 | Permission of NHAI/PWD etc. for road crossing. .(Final settlement of the payment will be done after providing receipt, agreement and permission paper) |
| 54 | permission of cutting and chopping of tree from forest deppt. ( Final settlement of the payment will be done after providing receipt, agreement and permission paper) |
| 55 | Petrolling in feet from starting to end and removal/lopping and chopping of tree branches which are lying in routre of 33 KV overhead line. |
| 56 | Restoring the road as it is before after completion of work |
| 57 | Painting of poles Painting of poles with one coat of red oxide, two coats of enamel paint ISI mark. (All required material will be supplied by the contractor) |
| 58 | Received back material which is replaced and left over including cable iron drum after erection. It will be deposited to the respected store center in which the project location comes under. Please Enable Macros to View BoQ information |
