|
| 1 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 2 | 100X58X1.90 mm |
| 3 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 4 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 5 | 250x16 mm |
| 6 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 7 | 250x10 mm |
| 8 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | 125 mm |
| 10 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 11 | Twin rubber stopper |
| 12 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 13 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 14 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. |
| 15 | Double charge vitrified tile polished finish of size |
| 16 | Size of Tile 600x600 mm |
| 17 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm |
| 18 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 21 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 22 | Old work (one or more coats) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 24 | Two or more coats on new work. |
| 25 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 26 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 27 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 28 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 29 | In cement mortar |
| 30 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 31 | For thickness of tiles 10 mm to 25 mm |
| 32 | Dismantling G.I. pipes (internal/external work) including excavation and refilling trenches after taking out the pipes/ exposed pipes on walls, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 33 | 15 mm to 40 mm nominal bore |
| 34 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 35 | W.C. pan with ISI marked white solid plastic seat and lid |
| 36 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 37 | Flat back wash basin of size 550x400 mm. |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 39 | Flexible pipe |
| 40 | 32 mm dia |
| 41 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 42 | Rectangular shape 453x357 mm |
| 43 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 44 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 46 | 20 mm nominal outer dia. Pipes. |
| 47 | 25 mm nominal outer dia .Pipes. |
| 48 | 40 mm nominal outer dia. Pipes. |
| 49 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 50 | 25 to 40 mm nominal bore |
| 51 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 52 | 45 cm length (a)15 mm nominal bore |
| 53 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 54 | 15 mm nominal bore, 165 mm long. Weighing not less than 110 gms. |
| 55 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 56 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 57 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 58 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 59 | Providing and fixing PTMT grating of approved quality and colour. |
| 60 | Circular type. |
| 61 | 125 mm nominal dia with 25 mm waste hole. |
| 62 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 63 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 64 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 65 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 66 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 67 | Frame size 50 x 100 mm |
| 68 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 69 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 70 | 30 mm thick |
| 71 | Dismantling of aluminium partitions, doors, windows, false ceiling of any type including dismembering , proper numbering, stacking and placing all the serviceable material at the designated location at site of work and disposal off unserviceable material all complete as directed by the Engineer-in-charge. (Area of partition/ false ceiling being dismantled at any designated compound shall be measured for payment)(Transportation of partition material to the site of work shall be paid separately) |
| 72 | Carting out of building rubbish / malba / similar unserviceable material including loading, transporting, unloading to municipal dumping ground beyond 50 m initial lead including all lifts as directed by the Engineer-in-charge, |
| 73 | Providing aluminium louver frame of 100mm width for ventilators with adjusting system for glass louvers etc. complete as per directions of Engineer in charge.(Glass louvers will be paid separately)(length of Aluminium louver frame is measured for payment) |
| 74 | Providing and fixing PTMT Two way bib cock or stop cock of approved quality and colour . |
| 75 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 76 | Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc. complete. |
| 77 | 20 mm nominal bore |
| 78 | 25 mm nominal bore |
| 79 | Providing and fixing PTMT Health faucet with wall support lever of 15mm nominal bore with nozzle jet and handle of approved quality of approved quality and colour etc. all complete. |
| 80 | Providing UPVC SWR pipes with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i)Single socketed pipe(couplings, other accessories will be paid separately) |
| 81 | 110mm diameter |
| 82 | 75mm diameter |
| 83 | Replacing existing on wall face damaged unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting, replacing, jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 84 | Plain bend of required degree |
| 85 | 110mm bend |
| 86 | 75mm bend |
| 87 | Tee with door |
| 88 | 110X110X110 |
| 89 | 75X75X75 |
| 90 | Door bend |
| 91 | 110mm |
| 92 | Providing and fixing plain junction floor trap of required degree unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting, replacing, jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. : |
| 93 | 110x110x75 mm With out Jali |
| 94 | Providing and fixing Brass MABT/FABT including cutting and threading the GI pipe Line and connecting to CPVC line wherever required etc. complete |
| 95 | 20 mm nominal bore |
| 96 | 25 mm nominal bore |
| 97 | 40 mm nominal bore |
| 98 | Making and fixing of aluminium frame work in position to wall for wall panelling/lining using available aluminium sections all complete as per the architectural drawings and as per the directions of the Engineer-in-charge. (The aluminium sections shall be supplied by the department at no cost. Area of wall panelling/lining shall be measured for payment, wall panelling/lining shall be paid separately) Please Enable Macros to View BoQ information |
