|
| 1 | SUPPLY OF MATERIAL FOR CONSTRUCTION OF 33 KV LINE FOR 33/11 KV SUBSTATION MARDAH FROM NEW PROPOSED 132/33KV GAZIPUR -II (MARDAH ) |
| 2 | X-Arm clamp for STP/PCC |
| 3 | Top channel clamp for STP/PCC |
| 4 | Dropper angle clamp |
| 5 | Bracing angle clamp |
| 6 | MS angle 65X65X6mm (3.2mtr*9No*5.8/kg) |
| 7 | Guarding angle clamp |
| 8 | 33 KV 'E' bracket |
| 9 | F/T bracket with clamp for PCC/STP |
| 10 | Earth wire Clamp with N&B |
| 11 | PG clamp for DOG conductor |
| 12 | Danger Board 33 KV with clamp |
| 13 | Number plate |
| 14 | Stone pad |
| 15 | GI Barbed wire |
| 16 | Nut & bolts with washer |
| 17 | GI pipe 6'' dia |
| 18 | Stay Clamp |
| 19 | Red oxide paint |
| 20 | Allu. Paint |
| 21 | Cable holding clamp |
| 22 | ERECTION OF WORKS FOR CONSTRUCTION OF 33 KV LINE FOR 33/11 KV SUBSTATION MARDAH FROM NEW PROPOSED 132/33KV GAZIPUR -II (MARDAH ) |
| 23 | 33 Kv line Isolator 800 A |
| 24 | Structure for line isolator |
| 25 | 33 Kv lightening arrestor |
| 26 | Structure for L.A. |
| 27 | ST Pole 11 mtr long |
| 28 | ST Pole 13 mtr long |
| 29 | PCC Pole 11m |
| 30 | PCC Pole 9m |
| 31 | ACSR dog conductor |
| 32 | 33 kV V type Cross Arm |
| 33 | 33 kV Disc insulator B&S type Polymeric |
| 34 | 33 KV Disc fitting Dog |
| 35 | 33 KV Pin insulator Polymer Type |
| 36 | 33 KV Top channel 125x65x6mm- 3200mm |
| 37 | MS dropper channel |
| 38 | 33 kV Bracing angle 65x65x6mm- 4300mm |
| 39 | Earthing rod 20x2500 mm |
| 40 | GI wire 5mm |
| 41 | GI wire 4mm |
| 42 | X-Arm clamp for STP/PCC |
| 43 | Top channel clamp for STP/PCC |
| 44 | Dropper angle clamp |
| 45 | Bracing angle clamp |
| 46 | MS angle 65X65X6mm (3.2mtr*9No*5.8/kg) |
| 47 | Guarding angle clamp |
| 48 | 33 KV 'E' bracket |
| 49 | F/T bracket with clamp for PCC/STP |
| 50 | Earth wire Clamp with N&B |
| 51 | PG clamp for DOG conductor |
| 52 | Danger Board 33 KV with clamp |
| 53 | Number plate |
| 54 | Stone pad |
| 55 | GI Barbed wire |
| 56 | Nut & bolts with washer |
| 57 | GI pipe 6'' dia |
| 58 | Stay Clamp |
| 59 | Red oxide paint |
| 60 | Allu. Paint |
| 61 | Cable holding clamp |
| 62 | Grouting and concreting of STP/PCC pole including proper plinthing and muffing, using cement concrete in standard proportion 1:4:8 as per departmental / RESPO specifications, including excavation, curing and dressing of site, complete in all respects. |
| 63 | Providing, fixing and concreting of Stay set including Stay rod, Stay plate, fastening and stay wire, including excavation of pit, concreting 1:2:4 and proper compaction as per RESPO norms, complete in all respects. |
| 64 | Cutting and trimming of tree branches obstructing the alignment of the line route for maintaining statutory electrical safety clearance. |
| 65 | Excavation and preparation of standard size cable trench for laying of 33 kV, 3×300 sqmm XLPE cable, including dressing and leveling of trench bottom, providing fine sand cushioning minimum 75 mm before the laying of cable (providing temporary barricading, caution boards and necessary safety arrangements during execution of work shall be arranged by the contractor ) |
| 66 | Laying and dressing of 33 kV, 3×300 sqmm XLPE cable in trench, including providing fine sand cushioning of 75mm above the cable, and protection by bricks on both side and separate stone slab covering with danger tape, complete in all respects. (All required materials such as sand, bricksstone slabs and warning tapeshall be provided by the contractor.) |
| 67 | Fixing and jointing of 33 kV, 3×300 sqmm XLPE cable with outdoor type termination / jointing kit, including careful removal of insulation, proper plumbing and taping of cable and providing, fixing and crimping of suitable size copper / aluminium lugs, complete in all respects. |
| 68 | Fixing and jointing of 33 kV, 3×300 sqmm XLPE cable through straight-through jointing kit, including careful removal of insulation, proper plumbing and taping of cable and providing, fixing and crimping of suitable size lugs, complete in all respects. |
| 69 | Hosting of 33 kV, 3×300 sqmm XLPE cable with 6 inch dia, 3 Mtr. long GI pipe on double pole structure, including lifting, mounting, clamping and making necessary connections, complete in all respects. |
| 70 | Providing and fixing RCC cable route marker of size 40\\" × 10\\" × 3\\" with inscription:“DANGER 33 kV UNDERGROUND CABLE DEPTH – __ METER” including painting and fixing at suitable intervals along the cable route, complete in all respects. |
| 71 | Cartage charges of 33 kV, 3×300 sqmm XLPE cable, including loading, unloading and transportation from store to site / Received back from site to store. |
| 72 | Cartage charges of materials |
| 73 | SUPPLY OF MATERIAL FOR CONSTRUCTION OF 33 KV LINE FOR 33/11 KV SUBSTATION BIRNO FROM NEW PROPOSED 132/33KV GAZIPUR -II (MARDAH ) |
| 74 | X-Arm clamp for STP/PCC |
| 75 | Top channel clamp for STP/PCC |
| 76 | Dropper angle clamp |
| 77 | Bracing angle clamp |
| 78 | MS angle 65X65X6mm (3.2mtr*175No*5.8/kg) |
| 79 | Guarding angle clamp |
| 80 | 33 KV 'E' bracket |
| 81 | F/T bracket with clamp for PCC/STP |
| 82 | Earth wire Clamp with N&B |
| 83 | PG clamp for DOG conductor |
| 84 | Danger Board 33 KV with clamp |
| 85 | Number plate |
| 86 | Stone pad |
| 87 | GI Barbed wire |
| 88 | Nut & bolts with washer |
| 89 | PN 6 PE 100 DN 160 mm HDPE Pipe |
| 90 | GI pipe 6'' dia |
| 91 | Stay Clamp |
| 92 | MS angle 65x65x6mm for extention side/ height bracket |
| 93 | MS channel 125x65x5mm for extention side/height bracket |
| 94 | Clamp for MS Angle |
| 95 | Clamp for MS Channel |
| 96 | Red oxide paint |
| 97 | Allu. Paint |
| 98 | Cable holding clamp |
| 99 | ERECTION OF WORKS FOR CONSTRUCTION OF 33 KV LINE FOR 33/11 KV SUBSTATION BIRNO FROM NEW PROPOSED 132/33KV GAZIPUR -II (MARDAH ) |
| 100 | ST Pole 11 mtr long |
| 101 | ST Pole 13 mtr long |
| 102 | PCC Pole 11m |
| 103 | PCC Pole 9m |
| 104 | ACSR dog conductor |
| 105 | 33 kV V type Cross Arm |
| 106 | 33 kV Disc insulator B&S type Polymeric |
| 107 | 33 KV Disc fitting Dog |
| 108 | 33 KV Pin insulator Polymer Type |
| 109 | 33 KV Top channel 125x65x6mm- 3200mm |
| 110 | MS dropper channel |
| 111 | 33 kV Bracing angle 65x65x6mm- 4300mm |
| 112 | Earthing rod 20x2500 mm |
| 113 | GI wire 5mm |
| 114 | GI wire 4mm |
| 115 | X-Arm clamp for STP/PCC |
| 116 | Top channel clamp for STP/PCC |
| 117 | Dropper angle clamp |
| 118 | Bracing angle clamp |
| 119 | MS angle 65X65X6mm (3.2mtr*175No*5.8/kg) |
| 120 | Guarding angle clamp |
| 121 | 33 KV 'E' bracket |
| 122 | F/T bracket with clamp for PCC/STP |
| 123 | Earth wire Clamp with N&B |
| 124 | PG clamp for DOG conductor |
| 125 | Danger Board 33 KV with clamp |
| 126 | Number plate |
| 127 | Stone pad |
| 128 | GI Barbed wire |
| 129 | Nut & bolts with washer |
| 130 | GI pipe 6'' dia |
| 131 | Stay Clamp |
| 132 | MS angle 65x65x6mm for extention side/ height bracket |
| 133 | MS channel 125x65x5mm for extention side/height bracket |
| 134 | Clamp for MS Angle |
| 135 | Clamp for MS Channel |
| 136 | Red oxide paint |
| 137 | Allu. Paint |
| 138 | Cable holding clamp |
| 139 | Grouting and concreting of STP/PCC pole including proper plinthing and muffing, using cement concrete in standard proportion 1:4:8 as per departmental / RESPO specifications, including excavation, curing and dressing of site, complete in all respects. |
| 140 | Providing, fixing and concreting of Stay set including Stay rod, Stay plate, fastening and stay wire, including excavation of pit, concreting 1:2:4 and proper compaction as per RESPO norms, complete in all respects. |
| 141 | Cutting and trimming of tree branches obstructing the alignment of the line route for maintaining statutory electrical safety clearance. |
| 142 | Providing horizontal directional drilling (HDD) for crossing below railway track / dense area including excavation of pits and laying of 160 mm dia HDPE pipe, complete in all respects. |
| 143 | Laying and dressing of U/G 33 kV, 3×300 sqmm XLPE cable in double circuit configuration through 160 mm dia HDPE pipe by horizontal drilling method below railway track / dense area, including sand cushioning and protection of cable loops by bricks and stone slabs, complete in all respects. |
| 144 | Excavation and preparation of standard size cable trench for laying of 33 kV, 3×300 sqmm XLPE cable, including dressing and leveling of trench bottom, providing fine sand cushioning minimum 75 mm before the laying of cable (providing temporary barricading, caution boards and necessary safety arrangements during execution of work shall be arranged by the contractor ). |
| 145 | Laying and dressing of 33 kV, 3×300 sqmm XLPE cable in trench, including providing fine sand cushioning of 75mm above the cable, and protection by bricks on both side and separate stone slab covering with danger tape, complete in all respects. (All required materials such as sand, bricksstone slabs and warning tapeshall be provided by the contractor.) |
| 146 | Fixing and jointing of 33 kV, 3×300 sqmm XLPE cable with outdoor type termination / jointing kit, including careful removal of insulation, proper plumbing and taping of cable and providing, fixing and crimping of suitable size copper / aluminium lugs, complete in all respects. |
| 147 | Fixing and jointing of 33 kV, 3×300 sqmm XLPE cable through straight-through jointing kit, including careful removal of insulation, proper plumbing and taping of cable and providing, fixing and crimping of suitable size lugs, complete in all respects. |
| 148 | Hosting of 33 kV, 3×300 sqmm XLPE cable with 6 inch dia, 3 Mtr. long GI pipe on double pole structure, including lifting, mounting, clamping and making necessary connections, complete in all respects. |
| 149 | Providing and fixing RCC cable route marker of size 40\\" × 10\\" × 3\\" with inscription:“DANGER 33 kV UNDERGROUND CABLE DEPTH – __ METER” including painting and fixing at suitable intervals along the cable route, complete in all respects. |
| 150 | Cartage charges of 33 kV, 3×300 sqmm XLPE cable, including loading, unloading and transportation from store to site / Received back from site to store. |
| 151 | Cartage charges of materials |
| 152 | SUPPLY OF MATERIAL FOR CONSTRUCTION OF 33 KV LINE FOR 33/11 KV SUBSTATION PANSERAWA FROM NEW PROPOSED 132/33KV GAZIPUR -II(MARDAH ) |
| 153 | X-Arm clamp |
| 154 | Top channel clamp |
| 155 | Dropper angle clamp |
| 156 | Bracing angle clamp |
| 157 | MS angle 65X65X6mm (3.2mtr*50No*5.8/kg) |
| 158 | Guarding angle clamp |
| 159 | 33 KV 'E' bracket |
| 160 | F/T bracket with clamp for PCC/STP |
| 161 | Earth wire Clamp with N&B |
| 162 | PG clamp for DOG conductor |
| 163 | Danger Board 33 KV with clamp |
| 164 | Number plate |
| 165 | Stone pad |
| 166 | GI Barbed wire |
| 167 | Nut & bolts with washer |
| 168 | GI pipe 6'' dia |
| 169 | Stay Clamp |
| 170 | MS angle 65x65x6mm for extention side/ height bracket |
| 171 | MS channel 125x65x5mm for extention side/height bracket |
| 172 | Clamp for MS Angle |
| 173 | Clamp for MS Channel |
| 174 | Red oxide paint |
| 175 | Allu. Paint |
| 176 | Cable holding clamp |
| 177 | ERECTION OF WORKS FOR CONSTRUCTION OF 33 KV LINE FOR 33/11 KV SUBSTATION PASERAWA FROM NEW PROPOSED 132/33KV GAZIPUR -II (MARDAH ) |
| 178 | ST Pole 11 mtr long |
| 179 | ST Pole 13 mtr long |
| 180 | PCC Pole 11 mtr long |
| 181 | PCC pole 9m |
| 182 | ACSR dog conductor |
| 183 | 33 kV 'V' type cross arm |
| 184 | 33 KV Disc insulator 70KN Polymer Type |
| 185 | 33 KV Disc fitting 70KN Polymer Type |
| 186 | 33 KV Pin insulator Polymer Type |
| 187 | 33 KV Top channel 125x65x6mm- 3200mm |
| 188 | MS dropper channel 100x50xx2600mm |
| 189 | 33 KV Bracing angle 65x65x6mm- 4300mm |
| 190 | Earthing rod 20x2500 mm |
| 191 | GI wire 5mm |
| 192 | GI wire 4mm |
| 193 | X-Arm clamp |
| 194 | Top channel clamp |
| 195 | Dropper angle clamp |
| 196 | Bracing angle clamp |
| 197 | MS angle 65X65X6mm (3.2mtr*50No*5.8/kg) |
| 198 | Guarding angle clamp |
| 199 | 33 KV 'E' bracket |
| 200 | F/T bracket with clamp for PCC/STP |
| 201 | Earth wire Clamp with N&B |
| 202 | PG clamp for DOG conductor |
| 203 | Danger Board 33 KV with clamp |
| 204 | Number plate |
| 205 | Stone pad |
| 206 | GI Barbed wire |
| 207 | Nut & bolts with washer |
| 208 | GI pipe 6'' dia |
| 209 | Stay Clamp |
| 210 | MS angle 65x65x6mm for extention side/ height bracket |
| 211 | MS channel 125x65x5mm for extention side/height bracket |
| 212 | Clamp for MS Angle |
| 213 | Clamp for MS Channel |
| 214 | Red oxide paint |
| 215 | Allu. Paint |
| 216 | Cable holding clamp |
| 217 | Grouting and concreting of STP/PCC pole including proper plinthing and muffing, using cement concrete in standard proportion 1:4:8 as per departmental / RESPO specifications, including excavation, curing and dressing of site, complete in all respects. |
| 218 | Providing, fixing and concreting of Stay set including Stay rod, Stay plate, fastening and stay wire, including excavation of pit, concreting 1:2:4 and proper compaction as per RESPO norms, complete in all respects. |
| 219 | Cutting and trimming of tree branches obstructing the alignment of the line route for maintaining statutory electrical safety clearance. |
| 220 | Excavation and preparation of standard size cable trench for laying of 33 kV, 3×300 sqmm XLPE cable, including dressing and leveling of trench bottom, providing fine sand cushioning minimum 75 mm before the laying of cable (providing temporary barricading, caution boards and necessary safety arrangements during execution of work shall be arranged by the contractor ). |
| 221 | Laying and dressing of 33 kV, 3×300 sqmm XLPE cable in trench, including providing fine sand cushioning of 75mm above the cable, and protection by bricks on both side and separate stone slab covering with danger tape, complete in all respects. (All required materials such as sand, bricksstone slabs and warning tapeshall be provided by the contractor.) |
| 222 | Fixing and jointing of 33 kV, 3×300 sqmm XLPE cable with outdoor type termination / jointing kit, including careful removal of insulation, proper plumbing and taping of cable and providing, fixing and crimping of suitable size copper / aluminium lugs, complete in all respects. |
| 223 | Fixing and jointing of 33 kV, 3×300 sqmm XLPE cable through straight-through jointing kit, including careful removal of insulation, proper plumbing and taping of cable and providing, fixing and crimping of suitable size lugs, complete in all respects. |
| 224 | Hosting of 33 kV, 3×300 sqmm XLPE cable with 6 inch dia, 3 Mtr. long GI pipe on double pole structure, including lifting, mounting, clamping and making necessary connections, complete in all respects. |
| 225 | Providing and fixing RCC cable route marker of size 40\\" × 10\\" × 3\\" with inscription:“DANGER 33 kV UNDERGROUND CABLE DEPTH – __ METER” including painting and fixing at suitable intervals along the cable route, complete in all respects. |
| 226 | Cartage charges of 33 kV, 3×300 sqmm XLPE cable, including loading, unloading and transportation from store to site / Received back from site to store. |
| 227 | Cartage charges of materials Please Enable Macros to View BoQ information |
