|
| 1 | Water Wall Tube, OD 63.5 X 5.6 mm, SA 210 GR- C | Water Wall Tube, OD 63.5 X 5.6 mm, SA 210 GR- C |
| 2 | Tube OD 76.1mm X 7.1mm, SA 210 Gr C | Tube OD 76.1mm X 7.1mm, SA 210 Gr C |
| 3 | Tube, OD 54 X 4.5 mm, SA 213 T-11 | Tube, OD 54 X 4.5 mm, SA 213 T-11 |
| 4 | Tube, OD 44.5 X 4.5mm, SA 213 T-11, Gr-C, LTSH Upper Bank | Tube, OD 44.5 X 4.5mm, SA 213 T-11, Gr-C, LTSH Upper Bank |
| 5 | LTSH Tube 44.5 X 4.5mm, SA 210 GR-C | LTSH Tube 44.5 X 4.5mm, SA 210 GR-C |
| 6 | Economizer Tube 31.8 X 4.5mm, SA 210 GR -A | Economizer Tube 31.8 X 4.5mm, SA 210 GR -A |
| 7 | Tube, OD 44.5 X 5 mm, SA 210 GR-A1 | Tube, OD 44.5 X 5 mm, SA 210 GR-A1 |
| 8 | SCW Offset Bends Left Side Corner Bends | SCW Offset Bends Left Side Corner Bends |
| 9 | SCW Offset Bends Right Side Corner Bend | SCW Offset Bends Right Side Corner Bend |
| 10 | 180 Degree U Bend for Economizer OD 31.8 X 4.5mm | 180 Degree U Bend for Economizer OD 31.8 X 4.5mm |
| 11 | Supply Tube HIT-1 D63.5X5.6 | Supply Tube HIT-1 D63.5X5.6 |
| 12 | Supply Tube HIT-2 D63.5X5.6 | Supply Tube HIT-2 D63.5X5.6 |
| 13 | U clamp for LTSH hanger tube | U clamp for LTSH hanger tube |
| 14 | 90 Degree Bend 63X5.6 mm | 90 Degree Bend 63X5.6 mm |
| 15 | 90 Degree Bend for Fin Welded Panel SCR1 to SCR16, 63.5 X 5.2 mm SA210 Gr-C | 90 Degree Bend for Fin Welded Panel SCR1 to SCR16, 63.5 X 5.2 mm SA210 Gr-C (Ceiling Tube second pass rear side) |
| 16 | Water Wall Bot 90 Degree Bend 63.5 X 5.2mm, SA210 Gr-C | Water Wall Bot 90 Degree Bend 63.5 X 5.2mm, SA210 Gr-C (Bottom Ring Header Water Wall) |
| 17 | Scallop Bar for LTSH Terminal Tubes | Scallop Bar for LTSH Terminal Tubes |
| 18 | FIN FLAT 12.7X6, 2.5 to 3M IS2062E250A | FIN FLAT 12.7X6, 2.5 to 3M IS2062E250A |
| 19 | FIN FLAT 76X6, L2.5M to 3M IS2062E250A | FIN FLAT 76X6, L2.5M to 3M IS2062E250A |
| 20 | FIN 90X6, 2.5 TO 3M IS2062E250A | FIN 90X6, 2.5 TO 3M IS2062E250A |
