|
| 1 | Supply , delivery, installation & commisioning of double door outdoor type MS fidder Pillar box compartmentalized dust proof, damp & vermin proof, free standing floor mounted type base pedestal for holding the upper compartment of the Pillar box. The overal suitable speciaous dimension of the pillar box as per EIC & shall be made of 3 mm CRCA sheet for body & 4 mm CRCA sheet for top cover, after seven tank process and painting with Epoxy powder coating in approved shade, with proper danger notice plate , interconnections with suitable capacity cupper leads/ strips. With locking agreement Neoprene rubber gasket of suitable thickness shall be provided between all joints and beneath all the covers. Adequate supporting and stiffening components like MS Angles etc should be used with foundation net complete. The above door [free opening including both side (front & back)] fitted with side of the pillar box by two sets hinge system arrangements with providing capsule hinge welded with the Pillar Box rigidly incl. providing door handle and suffient space for fixing of 2 nos pump motor starter incl necy. connection as per EIC.Supply & fixing following accessories as per direction of EIC. INCOMING - 1 nos. 250 amps 36 KA FP MCCB with spreader link Make- Lauritz Knudsen or equivalent as per EIC BUSBAR : 300 amp AL (suitable bar dimension 30 mm wide & 10 mm thickness) Bus bar (4 bar ) chambers system of required dimension mounted on non-hygroscopic porcelain insulator having sufficient di-electric strength duly wrapped with colour PVC tapes(Red, yellow, blue &black) for phase & neutral identification and keeping space Out Going - 3 nos- 63 Amp 25 KA FP MCCB with spreader link with complete set Make- Lauritz Knudsen or or equivalent as per EIC . 32 A C Curve D.P. M.C.B. 18 nos (6 nos per phase) Make- Lauritz Knudsen or equivalent as per EIC |
| 2 | Supplying and fixing 415V, TPN SFU with sheetsteel enclosure on angle iron frame on wallwith nuts bolts etc incl. S & F 3 nos. DIN type HRCfuse as per rating of as directed by EIC 160 Amp |
| 3 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection withsuitable size of copper wire and neutral link & provision for earthing attachment. 6 way as directed by EIC |
| 4 | Supplying and fixing 240/415 V MCB Isolator ondin rail of existing DBs and necessary connection as directed by EIC. 100 A F.P. |
| 5 | Supplying and fixing 240/415 V MCB of Breakingcapacity 10kA & C characteristics on din rail ofexisting DBs and necessary connection.as directed by EIC 6-32 A S.P |
| 6 | Laying of P.V.C. Al. armoured cable by M.S. saddles of following size as per P.W.D. schedule. Upto 35 sq mm 3.5 core |
| 7 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 8 | Supplying 35 sq mm 3.5 core XLPE. Al. armoured cable of as directed by EIC |
| 9 | Supplying 10 sq mm 2 core XLPE. Al. armoured cable of as directed by EIC |
| 10 | Supplying and fixing compression type gland complete with brass gland,brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cables as below: |
| 11 | 35 sq mm 3.5 core |
| 12 | 10 sq mm 2 core |
| 13 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. Supplying and fixing solderless socket ( Dowels make),tapes,anticorrosive paste & jointying materials. |
| 14 | 35 sq mm 3.5 core |
| 15 | 10 sq mm 2 core |
| 16 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 17 | Supply & Fixing 240 V, 6A, plug socket with separate 6 APiano key type switch (Brand approved by EIC) on sheetmetal switch board embedded in wall incl. S & F150x100x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws aftermaking housing for switch by cutting bakelite/perspex coverand making necessary connections as required. |
| 18 | Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. |
| 19 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 20 | 2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 21 | 2 x 6 sqmm + 1 x 1.5 sqmm |
| 22 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 23 | 2 x 10 sqmm + 1 x 6 sqmm |
| 24 | Supply & Fixing 240 V 6 A Piano key type switch (Brandapproved by EIC) on existing sheet metal switch boardhaving bakelite/perspex top cover by screws after makinghousing for switch by cutting bakelite/perspex cover andmaking necessary connections as required |
| 25 | Supply & Fixing 240 V 16/20 A Piano key type switch(Brand approved by EIC) on existing sheet metal switchboard having bakelite/perspex top cover by screws aftermaking housing for switch by cutting bakelite/perspexcover and making necessary connections as required |
| 26 | Supply & Fixing 240 V, 6A plug socket (Brand approvedby EIC), without switch & plug top, on existing sheetmetal switch board with bakelite/perspex top cover byscrews after making housing for plug by cuttingbakelite/perspex top cover and making necy. connectionswith PVC wire and earth continuity wire etc. |
| 27 | Supply & Fixing 240 V, 20 A plug socket (Brandapproved by EIC), without plug top and switch, onexisting sheet metal switch board with bakelite/perspextop cover by screws after making housing for combinedplug switch by cutting bakelite/perspex top cover andmaking necy. connections with PVC wire and earthcontinuity wire etc. |
| 28 | Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switchboard with bakelite/ perspex top cover by screw incl.making necy. connections etc. |
| 29 | Supply ang installation of spike rod earting with the earthing rod should be 1220 mm long fabricated from GI. Rod, the bottom of which to be made cut of the same rod in the shape of a cone and the head made out of the same rod . The earthing arrangements should consist of G.I. Bolt/nut and washers |
| 30 | Supplying and Fixing 200 x 150 x 100mm GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. Comprising of two nos Al. bar on porcelain insulator etc. and grounded with angle iron leg incl. painting |
| 31 | Supply & Fixing 415 mm x 200 mm x 65 mm bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required |
| 32 | Supply & Fixing 240 V, 25A Modular type socket, 25 A,Modular type starter (Brand approved by EIC) with 25AModular switch type DP MCB (C-Curve) and 6 Module GIModular type switch board with 6 Module top cover plateflushed in wall incl. S&F switch board and cover plate andmaking necy. connections with PVC Cu wire and earthcontinuity wire etc. |
| 33 | S & F Philips make 9 watt 825 lm LED ( HSN Code : 85395000 ) or euivalent as per EIC |
| 34 | Repairing existing panel monitoring portion by replacing the selecter switch C.T. Ammeter Voltmeter sliding fuse etc. as reqd. as per the E.I.C. |
| 35 | Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Brandapproved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required of 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 36 | S & F 6 - 32 A D.P. M.C.B. in SS enclosure with IP-20/30protection, powder coated on wall. |
| 37 | Supply & Fixing 20 watt LED Tube light (Single side connection) of Philips make TMC 501 / orient/ or euivalent as per EIC . |
| 38 | Supply & Fixing 20 watt L.E.D. fluorescent light poly carbonet body of Philips make TMC 501 / orient/ or euivalent as per EIC . |
| 39 | Repairing existing D.G. set by repairing and cleaning radiator, cleaning diesel tank, replacing mobile, lube oil filter, coolant, fuel pipe, thermostat element, V-belt, K sealent etc. as required as per the order E.I.C. |
| 40 | Supply & Fixing 3 watt surface panel light round shape of diff. colour as per E.I.C. Havells / Philips make or euivalent as per EIC. |
| 41 | Supply & Fixing with necy. arrangement round shape post top/gate light fitting with L.E.D. lamp ( 15 watt ) and nece. Connection of Havells make or euivalent as per EIC. |
| 42 | Supply & Fixing 18w round surface light rimelesscdl nece. Connection of Philips make or euivalent as per EIC. |
| 43 | Supply & Fixing 45w ecolink street light919415910018 with necy. Connection on wall by G.I.pipe and clamp as reqd. of Philips make or euivalent as per EIC. |
| 44 | Supply & Fixing PHILIPS 800029 IP65 STERLINGPEDESTAL or euivalent as per EIC with necy. Arrangement and connection as reqd. |
| 45 | GST 18% for item 1 to 35 Please Enable Macros to View BoQ information |
