|
| 1 | Earth work in excavation by mechanical means (hydraullic excavator ) / manual over area (exceeding 30cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal excavated earth lead upto 50m and lift up to 1.5m in comp position D.S.R 2023 SI NO 2.6.1 |
| 2 | PCC in 1:4:8 (1 Cement : 4 coarse sand (zone-ill) derived from natural sources : 8 graded stone aggregate 40 mmnominal size derived from natural sources) all complete . |
| 3 | Demolishing cement concrete manually /by mechanical means including disposal of material within 50metre leads as per item direction of engineer -in - charge .nominal concrete 1;3;6 or richer mix . |
| 4 | Disposal of old road material from site from 1.00km lead. |
| 5 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | M-150 brick work in (1:4)mortar with cement and f/sand in Super structure in comp.position in sub -structure DSR 2023 6.4.1 |
| 7 | PVC Pipe 110 mm Dia All complete. |
| 8 | 12 MM thick plaster on wall in 1 : 6 ( 1 cement , 6 course sand ) |
| 9 | s/fixing 6mm to 8 mm ivory or light shades vitrefied tiles 600x600 mm size in flooring or in skirting or in dado laid with 1:3 cement and approved c/sand mortar finished white cencnt slurry ,jointing and polishing comp.position (s.i-new item no 04 |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 11 | Providing &fixing aluminium work for doors ,windows, ventilors &partitions with extruded boilt up standard tubular sections /appropriate z sections and other sections of approved make conforming to isi 733and is 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at juctions i.e at top ,bottom, and sides with required EPDM rubber /neoprene gasket etc . aluminium sections shall be smooth rust free strainght mitred and jointed mechanically wherever required including cleat angle ,aluminium snap beading for glazing /panelling c.p. brass /stainless steel screws all complete./possition. |
| 12 | Anodised aluminium (anodised transpart or dyed to required shade according to is 1868minimum anodic coating of grade ac 15 dsr 21.1.1.1 |
| 13 | power coated aluminium (minimum thickness of power coating 50 micron ) dsr 21.1.1.2 |
| 14 | pre -laminated particles board with decorative laminations on both side dsr 21.2.2 |
| 15 | with float glass panes of 4.0mm thickness (weight not less than 10 kg/sqm dsr 21.3.1 |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 17 | 15 mm nominal dia Pipes |
| 18 | 20 mm nominal dia Pipes |
| 19 | providing and laying in position Cement concrete 1:2:4(1 cement:2 Coarse sand:4 gradded stone aggregate 20 mm nominal size. |
| 20 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 22 | finishing wall with Acrylic smooth exterior paint of required shade new work (two or more coat applied). DSR 13.46.1 |
| 23 | wiring point for lights etc All complete. |
| 24 | wiring point for plugs All complete. |
| 25 | Supply and wiring of submain with two number of 2.5 sqmm copper conductor cable all complete . |
| 26 | Rcc work in (1:1;5;3) mortar in plinth beam with 2cm gauge stone grit cement c/sand including all material labour tools etc in comp.position DSR 2023 SI NO 5.2.2 |
| 27 | mild steel in rcc work in comp.position (s.i-504) |
| 28 | providing and laying polished granite stone flooring in required design and patterns in linears as well as curvillinears portions of the building all complete .polished granite stone slab of colours black ,cherry/ruby red etc in complete /possition. |
| 29 | White vitreous china orissa pattern W.C pan of size 580x440mm Hindware or equpment with intergral type foot rest and 1 piece construction white vitreous china squatting plate with an intergal longitudinal flushing pipe with 5.0liter P,V,Cautomatic flushing cistern in comp.position (s.i- |
| 30 | Providing and fixING WHITE vetreous china pedestal type water EUROPEAN TYPE standarad size ISI marked hindware or equivalent with seal and lid c.p flush bend s.i. 21.29 |
| 31 | Providing and fixing white vitreous china flate back or wall corner type lipped front urinal basin of 30x260x350mm and 340x410x265mm size respectively with automatic flushing cistern with standard flush pipe and c.p brass spreders with brass unions and G>I clamp complete including all fitting ectc in comp.position one urinal basin with 5liter white P.V.C automatic flushing cistern |
| 32 | Providing and fixing wash basin with ci bracket 15mm c.p brass piller tape 32mmc.p brass waste of standard pattern including painting of fitting and brackets cutting and making good the wall wherever require white vitreous china wash basin size 630x450mm with a pair of 15mmC.Pbrass piller tape (s.i-new item21.16) |
| 33 | supply and fixing of kota stone in flooring 20mm thick and joint filled with 1'2 cement and coarse sand with approved colouring material to be given an even shade 12 mm base coat (bedding )of 1;2 cement & coarse sand motor and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all material labour tools & plants etc required in complete /possition above but 25 mm thick S.I NEW ITEM NO 02 |
| 34 | site clearness |
| 35 | painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coat on new work over an under coat of uitable shade with ordinary paint of approved brand and manufacture 2023 si no 13.61.1 |
| 36 | supplying exhaust fan of 1440 rpm of 300 mm 12''size with bracket blades complete for light duty suitable to operate on 230v 50hz ac supply |
| 37 | supply and fixing of sanitery fitting in toilet in complete/ possition Please Enable Macros to View BoQ information |
