|
| 1 | Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Sitapur to JE dumps store and from JE dump store to work site within 33/11 KV REUSA Mehmudabad area. |
| 2 | 11 KV 3x185 sq mm XLPE cable |
| 3 | 11 KV 3x185 sq mm O/D |
| 4 | 11 KV 3x185 sqmm St/Th |
| 5 | ACSR Weasel Conductor |
| 6 | 11 Mtr ST Pole |
| 7 | 8.5 Mtr PCC Pole |
| 8 | 11 kv pin insulator with pin |
| 9 | 11KV Top chanal 100*50*6 mm,3200 mm long |
| 10 | 11KV Droper chanal 100*50*6 mm,2400 mm long |
| 11 | 11kv disc insulater with fitting |
| 12 | M S Earthing Rod 20x2500 mm |
| 13 | 11 KV TYPE STEEL X-ARM |
| 14 | Ms CHANNEL 125X65X1300mm (T-OFF) |
| 15 | Stay Set 16x1800 Complete |
| 16 | Stay wire 7/10swg |
| 17 | GI wire8&10swg |
| 18 | Errection |
| 19 | Making Trench / Pit For st. thr. 11 KV 3x185 sq mm XLPE with digging and refilling of trench/pit. |
| 20 | Arrangement for Fixing of cable out door jointing Kit 11 KV 3x185 sq mm XLPE |
| 21 | Fabrication & erection of single pole for 11 KV /LT lline on 8.5 M long PCC Pole with fixing of necessary clamp & other acessories like Channel, cross arm, Danger board, barbed wire, Fbracket, etc. ( contractor shall provide, all material except pole ,Chanals,xarm ,Pin insulator ,disc insulator as per RESPO norms.) |
| 22 | Fabrication & erection of 11 KV cable exposure type double pole on 11 mtr with the provission of separate bus bar for each cable with fixing of necesory clamps and other acessories like danger board,number plate,barbed wire, 9 no. pin insulators with pins,1 no. channels 65x65 mm (1600mm each),1 no.MS channel 65x65mm(2800mm in length) and 2 no.MS angle 65x65x6 mm (each 2800mm in length ) for supporting the hoisting of cable & poles.its jumpering by single core PVC aluminium cable with proper size of lug. (all material arranged by contractor except pole,PVC aluminium cable & insulator,chanal ,angle).as per RESPO norms. ( Digram as per tender specification) |
| 23 | Double Pole- Fabrication, erection, of double pole for 11 KV line on 11mtrSTP/8.5 M long PCC pole with fixing of necessary clamps & other accessories like disc insulator, 1 no. top chennel 65×65x6 mm - 2.8M, 1 no. X bracing,disc fittingits, gaurding angle, 11kv pin with pin insulator ,danger board,number plate,barbed wire,jumpering by PG clamp 4 no stay complete work (all material arranged by contractor except insulator,disc insulator with fitting, stay set chanals angle & pole).as per RESPO norms. |
| 24 | Laying of 11 KV XLPE cable |
| 25 | CABLE LAYING BY Manual METHAD in trench (11 KV XLPE CABLE Provide by department ) |
| 26 | Hoisting of 11 KV XLPE cable on double pole with GI pipe of size 6\\" dia 3 M long including its jumpering complete with clamps, nuts and bolts(all material arranged by contractor except 11 kv cable). |
| 27 | Laying Stringing & Sagging of three phase 11 kv line on ACSRWeasel conductor as per RESPO Norms. |
| 28 | Guarding of O/H Line - Fabrication and fixing of guarding angle on single/double Poles as per RESSPO Norms including provision of all necessary clamps and hooks. 11 KV/LT lines to maintain proper clearence in between both Lines and Road(ALL MATARIAL LIKE GARDING ANGLE, CLAMP NUT BOLT PROVIDE By CONTRACTOR) |
| 29 | Ordinary Earthing of pole by M.S. Earthing Rod 20x2500mm with GI wire as per Resspo Norms only earting rod & G I wire provided by deptt other all material provide by contractor |
| 30 | Digging of Pit in kachcha/Pakka land in depth upto 1/6 length of Pole, Dragging of STP /pcc from near by place/Dump, Erection of Single pole along with stone pad in bottom with proper alignment of line for 11 KV line on 11 M long ST/8.5Mtr PCC Pole and refilling with ramming of earth. |
| 31 | Grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick balast as per RESPO norms. |
| 32 | High Pressure Testing and fault location of 11 KV cables/line/ as per norms |
| 33 | Tree branches cutting and chopping where required |
| 34 | Grouting of stay Please Enable Macros to View BoQ information |
