|
| 1 | Earth work in all kind of soil for excavation of foundation including cost of all etc complete in all respect. |
| 2 | Filling foundation and plinth with sand well water and rammed etc complete in all respect. |
| 3 | Providing PCC (1:3:6) using 40mm hard granite metal in foundation & floor etc complete in all respect. |
| 4 | Cement Concrete (1:2:4) using 12mm size HBG Chips including cost conveyance royalaties etc complete. |
| 5 | Providing RCC with M-20 grade using 20mm and down graded chipes including cost of all centering and shuttering etc complete in all respect.A) Foundation base & footing |
| 6 | B) Gread Beam |
| 7 | C) Column |
| 8 | D) Lintel |
| 9 | E) Beams |
| 10 | F) Roof Slab |
| 11 | Providing M.S reinforcenemt including cutting bending and bindng and placeing in position etc complete in all respect. |
| 12 | Fly ash brick Masonary in (1:6) c.m using 9\\" size Fly ash bricks including cost of all cte complete in all respect.Superstructure |
| 13 | 12 mm thick cement plaster in (1:6) cm over brick work etc complete in all respect. |
| 14 | 16 mm thick cement plaster in (1:6) cm over brick work etc complete in all respect. |
| 15 | 6 mm thick cement plaster in (1:4) over RCC work etc complete in all respect. |
| 16 | Supplying fitting fixing of Un-plasticised Poly Vinly chloride (UPVC)(FENESTA/NCL VEKA LTD) Ventilator/Top Hung-60 series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames , 75mmx60mmx2.25mm for casement Window Sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 micrones of minimum thickness of 1.5 mm prefabricable & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 no per set of sashes including cost, conveyence of all materials , accessories,labour charges etc complete. |
| 17 | Supplying fitting fixing of Un-plasticised Poly Vinly chloride (UPVC)(FENESTA/NCL VEKA LTD) Casement Door-60-Series duly manufactured using UPVC reinforced profile of -60mmx55mmx2.5mm for outer frames , 102mmx60mmx2.25mm for casement Door Sash profile and 74mmx60mmx2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 micrones of minimum thickness of 2.0 mm prefabricable & welded through fusion welding the Door sash shall be fitted with12 mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant including cost, conveyence of all materials , accessories,labour charges etc complete. |
| 18 | Supplying fitting fixing Vertified tiles in floor on 20mm thick cement bed ( 1:4) jointed to neat cement slurry etc complete including all cost conveyence labour T&P etc complete. |
| 19 | Supplying fitting fixing Vertified Industrial tiles in 300*300 floor on 20mm thick cement bed ( 1:4) jointed to neat cement slurry etc complete including all cost conveyence labour T&P etc complete. |
| 20 | Providing Vertified industrial tiles in 300*300 dadoes using on 12 mm thick Cement bed (1:3) etc complete in all respect. |
| 21 | Finishing wall surface with cement based putty (water based) and finished smooth to uneven surface including all cost conveyence labour T&P etc complete. |
| 22 | Finishing wall surface with Plastic Emultion paint two coats over a coat of primer over the plaster surface ( in side) etc complete in all respect. |
| 23 | Finishing wall surface with weather coat two coats over a coat of primer over the plaster surface ( in out side) etc complete in all respect. |
| 24 | Providing , fitting and fixing of Stainless Steel railling using 50 mm dia of 2 mm thick inculding circular pipe inculding cost of all etc complete in all respect. |
| 25 | 2.5cm thick grading concrete c.c (1:2:2) using 6mm sizeH.B.G chips of approved quality from quarry including all cost conveyence labour T&P etc complete. |
| 26 | GEDRecessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.GROUP-A |
| 27 | GROUP-B |
| 28 | GROUP-C |
| 29 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 30 | Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( flame retradant type) with suitable size modular box & metallic cover plate (both side) flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 31 | 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic FRLS heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 32 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic FRLS heavy duty PVC conduit. (2X2.5+1X1.5) |
| 33 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic FRLS heavy duty PVC conduit . (2X4+1X1.5) |
| 34 | S/F of 6 sq.mm 2 Core Alluminium, armoured LT power Cable main insulated 650/1100 grade(make-Havells/Polycab) |
| 35 | Supply and fixing of 4 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 36 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9./ABB SB 200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 years. |
| 37 | Supplying and fixing 6-32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year. |
| 38 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 39 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 40 | SITC of energy efficient LED tube light fittings with decorative alumunium LED batten along with LED tube light having power rating 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required.The luminaire should be Replacement Warranty will be 2 years panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro |
| 41 | S/F of 1x30W 5700K LED street light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(ENDURA CITYLITE PLATINUM PLUS) |
| 42 | SITC of Sleek LED 9 watt LED Lamp complete with all accessories etc. directly on angle holder as required.The luminaire should be Replacement Warranty will be 2 yearspanasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro |
| 43 | GPHSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.i)20mm dia C - PVC pipe SDR - 11 |
| 44 | 32mm dia C - PVC pipe SDR - 11 |
| 45 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 46 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 47 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 48 | 32mm dia brass full way valve (Shakti make) |
| 49 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 50 | 15mm CP Extension piece |
| 51 | 125mm CP grating |
| 52 | 15mm size C.P. flange |
| 53 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 54 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 55 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 56 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 57 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 58 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 59 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 60 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 61 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 62 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 63 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 64 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 65 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargei)European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 66 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )i)10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 67 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-chargei)Halfpedestal basin(560x450)Hindware No.91049+91115 |
| 68 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeI)Towel ring |
| 69 | Supplying all materials labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 70 | Supplying all materials labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 71 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargei)Inside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 72 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in chargei)100mm dia P.V.C. pipe Please Enable Macros to View BoQ information |
