| 4 | LED Street light fixture, powder coated pressure die cast aluminum body (System lumenefficacy =120 (135 lm/Watt)Supplying, installation, Testing and Commissioning of Street light LED fixture powder coatedpressure die cast aluminum body with driver as per the requirement with Driver efficiency)85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driverefficiency )85%,THD ( 10% as per IEC 61000-3-2 , P. F.=0.95, IP66,IK-10, CRI )80, under voltage and over voltage protection, EMI- EMC As per CISPR15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and theproject requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver and electricalcircuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till lifeends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching)(5, Maximum power consumption should not more than the specified rating and Fixtureshall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mmFRLS, PVC insulated copper conductor single core cable and earthing etc. as requiredwith Minimum 5 year OEM warranty. System lumen efficacy =120 (135 lm/Watt output .LM79 and LM80 Test report from NABL lab for all testing required for LED fixtures as perBIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Chargeas per requirement. (Thermal management: heat sink of aluminum housing such that LEDjunction temperature shall not rise above 90°C).Note: The said description of LED Street Light is taken from amended HSR (HSR No. 23.28.13.14) CHANDIGARH, MONDAY, APRIL 13, 2026, but the said item is not reflecting on HEWP Portal. So taken as an NS Item. |
