|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed. |
| 2 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 3 | Demolition of reinforced cement concrete of any description and in any position complete all as specified. |
| 4 | Dismantling of PVC(SWR) drain pipe alongwith fittings and acessories and taking out from walls, floors or from trenches, if required complete all as specified and directed for following sizes :- |
| 5 | 75mm dia |
| 6 | 110 mm dia |
| 7 | Dismantling of cast iron(sand cast)soil, waste and vent pipe upto 100mm bore alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required dincluding removing vegetation growth around pipes as required, making good surface to match with existing including necessary scaffolding complete all as specified. |
| 8 | Demolition and breaking up drain pipes(salt glazed stone ware, AC or reinforced concrete) of size 150mm dia set in cement mortar including PCC bedding and haunching etc complete all as specified. |
| 9 | Demolition and breaking up drain pipes(salt glazed stone ware, AC or reinforced concrete) of size 200mm dia set in cement mortar including PCC bedding and haunching etc complete all as specified. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 11 | Excavation in treches, n exc 1.5 m wide and n exc 1.5m depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out ,for foundation ,etc or for shafts wells, cesspits, manholes, pier holdes, pipe lines etc in soft/loost soil , complete all as specified. |
| 12 | Excavation in treches, exc 1.5m depth but not exceeding 3m in depth or not exceeding 10 Sqm on plan and getting out for foundation etc or for shafts wells, cesspits , manholes pier holes, sewage line etc in soft/loose soil complete all as specified. |
| 13 | Returning filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft/loost soil complete all as specified. |
| 14 | Removing excavated surplus material to a distance not exceeidng 50 mtr and depositing where directed a level not exceeding 1.5m above the starting point complete all as specified. |
| 15 | Material and labour for precast cement concrete block masonry 1:3:6 Type C-1 using 20 mm graded stone agggregate with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified. |
| 16 | Material and labour for 75 mm tk PCC 1:3:6 type C2 using 40 mm graded crushed stone aggretatges as in sub base in path finished the surface even and rough, completed all as specified. |
| 17 | Supply and fix Pavement floor vitrified tiles of size 300x 300x 8 to 10 mm thk (Endura tiles of Johnson or equivalent makes listed in List of Makes) of approved colour and design set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm th screed bed in cement mortar 1:4 including dismantling of old tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell Ltd |
| 18 | Material and labour for cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggregates as in lintels upto 1.5m clear span, steps, sesmic and other similar bands, bed plates road side kerbs, coping/cills, bed block for embedding ghold fast etc including necessary from work, weathering, slightly rounded or chamfered angles and throating complete all as directed. |
| 19 | Material and labour for providing precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in landings cover slabs (for man holes tec) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces joint as directed and setting in CM 1:4 complete all as specified. |
| 20 | Material and labour for Mild steel TMT bars of Fe 500D and 550D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.Make: Any of as per Engineer-In-Chief branchs list of approved makes Please Enable Macros to View BoQ information |
| 21 | Material and labour for Mild steel TMT bars of Fe 500D and 550D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.Make: Any of as per Engineer-In-Chief branchs list of approved makes Please Enable Macros to View BoQ information |
